The population density of Maryland was 618 in 2018.
Population Density
Population Density is computed by dividing the total population by Land Area Per Square Mile.
Above charts are based on data from the U.S. Census American Community Survey | ODN Dataset | API -
Geographic and Population Datasets Involving Maryland
- API
Choose Maryland: Compare Counties - Demographics
opendata.maryland.gov | Last Updated 2024-07-09T17:43:22.000ZPopulation profile - total, rate of change, age, and density.
- API
MD COVID-19 - Total Cases Statewide
opendata.maryland.gov | Last Updated 2024-09-24T16:30:23.000Z<b>Note:</b> Starting April 27, 2023 updates change from daily to weekly. <b>Summary</b> The cumulative number of positive COVID-19 cases among Maryland residents. <b>Description</b> The MD COVID-19 - Total Cases Statewide data layer is a collection of the statewide positive COVID-19 test results that have been reported each day by each local health department via the ESSENCE system. <b>Terms of Use</b> The Spatial Data, and the information therein, (collectively the "Data") is provided "as is" without warranty of any kind, either expressed, implied, or statutory. The user assumes the entire risk as to quality and performance of the Data. No guarantee of accuracy is granted, nor is any responsibility for reliance thereon assumed. In no event shall the State of Maryland be liable for direct, indirect, incidental, consequential or special damages of any kind. The State of Maryland does not accept liability for any damages or misrepresentation caused by inaccuracies in the Data or as a result to changes to the Data, nor is there responsibility assumed to maintain the Data in any manner or form. The Data can be freely distributed as long as the metadata entry is not modified or deleted. Any data derived from the Data must acknowledge the State of Maryland in the metadata.
- API
Choose Maryland: Compare States - Demographics
opendata.maryland.gov | Last Updated 2024-07-09T17:45:48.000ZPopulation profile - total, rate of change, age, and density.
- API
WAOFM - Census - Population and Housing, 2000 and 2010
data.wa.gov | Last Updated 2021-09-01T17:20:31.000ZPopulation and housing information extracted from decennial census Public Law 94-171 redistricting summary files for Washington state for years 2000 and 2010.
- API
Maryland Resident Population Per Square Mile: 2010-2020
opendata.maryland.gov | Last Updated 2024-03-11T18:51:03.000ZResident population density for Maryland and Jurisdictions per square mile from 2010 to 2020. Source: U.S. Bureau of Census
- API
MD COVID-19 - Cases by County
opendata.maryland.gov | Last Updated 2024-09-24T16:31:48.000Z<b>Note:</b> Starting April 27, 2023 updates change from daily to weekly. <b>Summary</b> The cumulative number of positive COVID-19 cases among Maryland residents within a single Maryland jurisdiction. <b>Description</b> The MD COVID-19 - Cases by County data layer is a collection of positive COVID-19 test results that have been reported each day by the local health department via the ESSENCE system. <b>Terms of Use</b> The Spatial Data, and the information therein, (collectively the "Data") is provided "as is" without warranty of any kind, either expressed, implied, or statutory. The user assumes the entire risk as to quality and performance of the Data. No guarantee of accuracy is granted, nor is any responsibility for reliance thereon assumed. In no event shall the State of Maryland be liable for direct, indirect, incidental, consequential or special damages of any kind. The State of Maryland does not accept liability for any damages or misrepresentation caused by inaccuracies in the Data or as a result to changes to the Data, nor is there responsibility assumed to maintain the Data in any manner or form. The Data can be freely distributed as long as the metadata entry is not modified or deleted. Any data derived from the Data must acknowledge the State of Maryland in the metadata.
- API
MD COVID-19 - Total Confirmed Deaths Statewide
opendata.maryland.gov | Last Updated 2024-09-24T16:32:09.000Z<b>Note:</b> Starting April 27, 2023 updates change from daily to weekly. <b>Summary</b> The cumulative number of confirmed COVID-19 deaths among Maryland residents. <b>Description</b> The MD COVID-19 - Total Confirmed Deaths Statewide data layer is a collection of the statewide confirmed COVID-19 related deaths that have been reported each day by the Vital Statistics Administration. A death is classified as confirmed if the person had a laboratory-confirmed positive COVID-19 test result. Some data on deaths may be unavailable due to the time lag between the death, typically reported by a hospital or other facility, and the submission of the complete death certificate. Probable deaths are available from the MD COVID-19 - Total Probable Deaths Statewide data layer. Update 5/27/21: The Maryland Department of Health (MDH) Vital Statistics Administration (VSA) revised the state’s COVID-19 data to include deaths that were not properly classified by medical certifiers over the past year. VSA identified these deaths as COVID-19 deaths through an information reconciliation process utilizing other sources of data. Learn more: https://health.maryland.gov/newsroom/Pages/Maryland-Department-of-Health-Vital-Statistics-Administration-issues-revision-of-COVID-19-death-data.aspx <b>Terms of Use</b> The Spatial Data, and the information therein, (collectively the "Data") is provided "as is" without warranty of any kind, either expressed, implied, or statutory. The user assumes the entire risk as to quality and performance of the Data. No guarantee of accuracy is granted, nor is any responsibility for reliance thereon assumed. In no event shall the State of Maryland be liable for direct, indirect, incidental, consequential or special damages of any kind. The State of Maryland does not accept liability for any damages or misrepresentation caused by inaccuracies in the Data or as a result to changes to the Data, nor is there responsibility assumed to maintain the Data in any manner or form. The Data can be freely distributed as long as the metadata entry is not modified or deleted. Any data derived from the Data must acknowledge the State of Maryland in the metadata.
- API
WAOFM - Census - Population Density by County by Decade, 1900 to 2020
data.wa.gov | Last Updated 2023-07-06T16:48:57.000ZWashington state population density by county by decade 1900 to 2020.
- API
MD COVID-19 - Cases per 100K population, by jurisdiction
opendata.maryland.gov | Last Updated 2024-09-24T16:36:40.000Z<b>Note:</b> Starting April 27, 2023 updates change from daily to weekly. <b>Summary</b> The rate of confirmed COVID-19 cases among Marylanders per 100,000 people in each Maryland jurisdiction. <b>Description</b> The MD COVID-19 cases per 100K population, by jurisdiction layer is the rate of confirmed daily COVID-19 cases among Marylanders per 100,000 people in each Maryland jurisdiction. This rate is a 7-day average, calculated using the CasesByCounty layer and the 2019 estimated county populations (Maryland Department of Planning). Any negative value may be attributed to changes in reporting by jurisdiction. <b>Terms of Use</b> The Spatial Data, and the information therein, (collectively the "Data") is provided "as is" without warranty of any kind, either expressed, implied, or statutory. The user assumes the entire risk as to quality and performance of the Data. No guarantee of accuracy is granted, nor is any responsibility for reliance thereon assumed. In no event shall the State of Maryland be liable for direct, indirect, incidental, consequential or special damages of any kind. The State of Maryland does not accept liability for any damages or misrepresentation caused by inaccuracies in the Data or as a result to changes to the Data, nor is there responsibility assumed to maintain the Data in any manner or form. The Data can be freely distributed as long as the metadata entry is not modified or deleted. Any data derived from the Data must acknowledge the State of Maryland in the metadata.
- API
MD COVID-19 - Confirmed Deaths by Age Distribution
opendata.maryland.gov | Last Updated 2024-09-24T16:32:31.000Z<b>Note:</b> Starting April 27, 2023 updates change from daily to weekly. <b>Summary</b> The cumulative number of confirmed COVID-19 deaths among Maryland residents by age: 0-9; 10-19; 20-29; 30-39; 40-49; 50-59; 60-69; 70-79; 80+; Unknown. <b>Description</b> The MD COVID-19 - Confirmed Deaths by Age Distribution data layer is a collection of the statewide confirmed COVID-19 related deaths that have been reported each day by the Vital Statistics Administration by designated age ranges. A death is classified as confirmed if the person had a laboratory-confirmed positive COVID-19 test result. Some data on deaths may be unavailable due to the time lag between the death, typically reported by a hospital or other facility, and the submission of the complete death certificate. Probable deaths are available from the MD COVID-19 - Probable Deaths by Age Distribution data layer. <b>Terms of Use</b> The Spatial Data, and the information therein, (collectively the "Data") is provided "as is" without warranty of any kind, either expressed, implied, or statutory. The user assumes the entire risk as to quality and performance of the Data. No guarantee of accuracy is granted, nor is any responsibility for reliance thereon assumed. In no event shall the State of Maryland be liable for direct, indirect, incidental, consequential or special damages of any kind. The State of Maryland does not accept liability for any damages or misrepresentation caused by inaccuracies in the Data or as a result to changes to the Data, nor is there responsibility assumed to maintain the Data in any manner or form. The Data can be freely distributed as long as the metadata entry is not modified or deleted. Any data derived from the Data must acknowledge the State of Maryland in the metadata.