Empowered by Tyler Technologies
Refine Results

The population density of DuPage County, IL was 2,845 in 2018. The population density of Hamilton County, IN was 802 in 2018.

Population Density

Population Density is computed by dividing the total population by Land Area Per Square Mile.

Above charts are based on data from the U.S. Census American Community Survey | ODN Dataset | API - Notes:

1. ODN datasets and APIs are subject to change and may differ in format from the original source data in order to provide a user-friendly experience on this site.

2. To build your own apps using this data, see the ODN Dataset and API links.

3. If you use this derived data in an app, we ask that you provide a link somewhere in your applications to the Open Data Network with a citation that states: "Data for this application was provided by the Open Data Network" where "Open Data Network" links to http://opendatanetwork.com. Where an application has a region specific module, we ask that you add an additional line that states: "Data about REGIONX was provided by the Open Data Network." where REGIONX is an HREF with a name for a geographical region like "Seattle, WA" and the link points to this page URL, e.g. http://opendatanetwork.com/region/1600000US5363000/Seattle_WA

Geographic and Population Datasets Involving DuPage County, IL or Hamilton County, IN

  • API

    Top20CountyCityTaxData

    data.bloomington.in.gov | Last Updated 2022-09-01T14:11:26.000Z

    This dataset contains population, property tax rate and income tax rate for the top 20 cities in Indiana by population minus Indianapolis and Ft. Wayne. Population information came from Wikipedia: https://en.wikipedia.org/wiki/List_of_cities_in_Indiana Property tax rate information came from: https://www.stats.indiana.edu/dms4/propertytaxes.asp

  • API

    Waste Tire Abatement Sites

    data.ny.gov | Last Updated 2022-08-12T17:59:04.000Z

    Information on designated waste tire abatement sites in New York State, including approximate size, location, and abatement status.

  • API

    StRep2010

    datacatalog.cookcountyil.gov | Last Updated 2024-04-10T18:51:02.000Z

    IL State Representative Districts based on Census 2010

  • API

    Incidence Rate Of Leukemia Per 100,000 All States

    opendata.utah.gov | Last Updated 2019-04-19T00:30:16.000Z

    Incidence Rate Of Leukemia Per 100,000 All States

  • API

    Vital Signs: Greenfield Development – by county

    data.bayareametro.gov | Last Updated 2020-07-03T16:36:18.000Z

    VITAL SIGNS INDICATOR Greenfield Development (LU5) FULL MEASURE NAME The acres of construction on previously undeveloped land LAST UPDATED November 2019 DESCRIPTION Greenfield development refers to construction on previously undeveloped land and the corresponding expansion of our region’s developed footprint, which includes the extent of urban and built-up lands. The footprint is defined as land occupied by structures, with a building density of at least 1 unit to 1.5 acres. DATA SOURCE Department of Conservation: Farmland Mapping and Monitoring Program GIS Data Tables/Layers (1990-2016) https://www.conservation.ca.gov/dlrp/fmmp U.S. Census Bureau: Decennial Census Population by Census Block Group (2000-2010) http://factfinder.census.gov U.S. Census Bureau: American Community Survey (5-year) Population by Census Block Group (2000-2017) http://factfinder.census.gov METHODOLOGY NOTES (across all datasets for this indicator) For regional and local data, FMMP maps the extent of “urban and built-up” lands, which generally reflect the developed urban footprint of the region. The footprint is defined as land occupied by structures with building density of at least 1 unit to 1.5 acres. Uses include residential, industrial, commercial, construction, institutional, public administration, railroad and other transportation yards, cemeteries, airports, golf courses, sanitary landfills, sewage treatment, water control structures, and other developed purposes. To determine the amount of greenfield development (in acres) occurring in a given two-year period, the differences in urban footprint are computed on a county-level. FMMP makes slight refinements to urban boundaries over time, so changes in urban footprint +/- 100 acres are not regionally significant. The GIS shapefile represents the 2016 urban footprint and thus does not show previously urbanized land outside of the footprint (i.e. Hamilton Air Force Base). For metro comparisons, a different methodology had to be used to avoid the geospatial limitations associated with FMMP. U.S. Census population by census block group was gathered for each metro area for 2000, 2010, and 2017. Population data for years 2000 and 2010 come from the Decennial Census while data for 2018 comes from the 2017 5-year American Community Survey. The block group was considered urbanized if its average/gross density was greater than 1 housing unit per acre (a slightly higher threshold than FMMP uses for its definition). Because a block group cannot be flagged as partially urbanized, and non-residential uses are not fully captured, the urban footprint of the region calculated with this methodology is smaller than in FMMP. The metro data should be primarily used for looking at comparative growth rate in greenfield development rather than the acreage totals themselves.

  • API

    Incidence Of Brain And Central Nervous System Cancer Age 15 Under Per 1,000,000 All States

    opendata.utah.gov | Last Updated 2019-04-19T01:42:51.000Z

    Incidence Of Brain And Central Nervous System Cancer Age 15 Under Per 1,000,000 All States

  • API

    Incidence Rate Of Pancreatic Cancer Per 100,000 All States

    opendata.utah.gov | Last Updated 2019-04-19T06:47:25.000Z

    Incidence Rate Of Pancreatic Cancer Per 100,000 All States

  • API

    Incidence Rate Of Mesothelioma Per 100,000 All States

    opendata.utah.gov | Last Updated 2019-04-19T05:29:37.000Z

    Incidence Rate Of Mesothelioma Per 100,000 All States

  • API

    Vital Signs: Greenfield Development – Bay Area shapefile

    data.bayareametro.gov | Last Updated 2020-07-03T16:35:24.000Z

    VITAL SIGNS INDICATOR Greenfield Development (LU5) FULL MEASURE NAME The acres of construction on previously undeveloped land LAST UPDATED November 2019 DESCRIPTION Greenfield development refers to construction on previously undeveloped land and the corresponding expansion of our region’s developed footprint, which includes the extent of urban and built-up lands. The footprint is defined as land occupied by structures, with a building density of at least 1 unit to 1.5 acres. DATA SOURCE Department of Conservation: Farmland Mapping and Monitoring Program GIS Data Tables/Layers (1990-2016) https://www.conservation.ca.gov/dlrp/fmmp U.S. Census Bureau: Decennial Census Population by Census Block Group (2000-2010) http://factfinder.census.gov U.S. Census Bureau: American Community Survey (5-year) Population by Census Block Group (2000-2017) http://factfinder.census.gov METHODOLOGY NOTES (across all datasets for this indicator) For regional and local data, FMMP maps the extent of “urban and built-up” lands, which generally reflect the developed urban footprint of the region. The footprint is defined as land occupied by structures with building density of at least 1 unit to 1.5 acres. Uses include residential, industrial, commercial, construction, institutional, public administration, railroad and other transportation yards, cemeteries, airports, golf courses, sanitary landfills, sewage treatment, water control structures, and other developed purposes. To determine the amount of greenfield development (in acres) occurring in a given two-year period, the differences in urban footprint are computed on a county-level. FMMP makes slight refinements to urban boundaries over time, so changes in urban footprint +/- 100 acres are not regionally significant. The GIS shapefile represents the 2016 urban footprint and thus does not show previously urbanized land outside of the footprint (i.e. Hamilton Air Force Base). For metro comparisons, a different methodology had to be used to avoid the geospatial limitations associated with FMMP. U.S. Census population by census block group was gathered for each metro area for 2000, 2010, and 2017. Population data for years 2000 and 2010 come from the Decennial Census while data for 2018 comes from the 2017 5-year American Community Survey. The block group was considered urbanized if its average/gross density was greater than 1 housing unit per acre (a slightly higher threshold than FMMP uses for its definition). Because a block group cannot be flagged as partially urbanized, and non-residential uses are not fully captured, the urban footprint of the region calculated with this methodology is smaller than in FMMP. The metro data should be primarily used for looking at comparative growth rate in greenfield development rather than the acreage totals themselves.

  • API

    Incidence Rate Of Non- Hodgkins Lymphoma Per 100,000 All States

    opendata.utah.gov | Last Updated 2019-04-19T01:50:56.000Z

    Incidence Rate Of Non- Hodgkins Lymphoma Per 100,000 All States