The water area of Keystone Heights, FL was 0 in 2018.
Land Area
Water Area
Land area is a measurement providing the size, in square miles, of the land portions of geographic entities for which the Census Bureau tabulates and disseminates data. Area is calculated from the specific boundary recorded for each entity in the Census Bureau's geographic database. Land area is based on current information in the TIGER® data base, calculated for use with Census 2010.
Water Area figures include inland, coastal, Great Lakes, and territorial sea water. Inland water consists of any lake, reservoir, pond, or similar body of water that is recorded in the Census Bureau's geographic database. It also includes any river, creek, canal, stream, or similar feature that is recorded in that database as a two- dimensional feature (rather than as a single line). The portions of the oceans and related large embayments (such as Chesapeake Bay and Puget Sound), the Gulf of Mexico, and the Caribbean Sea that belong to the United States and its territories are classified as coastal and territorial waters; the Great Lakes are treated as a separate water entity. Rivers and bays that empty into these bodies of water are treated as inland water from the point beyond which they are narrower than 1 nautical mile across. Identification of land and inland, coastal, territorial, and Great Lakes waters is for data presentation purposes only and does not necessarily reflect their legal definitions.
Above charts are based on data from the U.S. Census American Community Survey | ODN Dataset | API -
Geographic and Area Datasets Involving Keystone Heights, FL
- API
GRU Customer Reclaimed Water Consumption
data.cityofgainesville.org | Last Updated 2022-09-27T18:05:00.000ZMonthly reclaimed water consumption in Kilo-gallons (kgals) by service address for all customers in the GRU Service Area. Reclaimed water is also known as sewer or wastewater. (Potable water use can be found in another dataset)
- API
DWR Dam Safety Jurisdictional Dam
data.colorado.gov | Last Updated 2024-10-27T06:25:11.000ZA Jurisdictional Dam is a dam creating a reservoir with a capacity of more than 100 acre-feet, or creates a reservoir with a surface area in excess of 20 acres at the high-water line, or exceeds 10 feet in height measured vertically from the elevation of the lowest point of the natural surface of the ground where that point occurs along the longitudinal centerline of the dam up to the crest of the emergency spillway of the dam. For reservoirs created by excavation, or where the invert of the outlet conduit is placed below the surface of the natural ground at its lowest point beneath the dam, the jurisdictional height shall be measured from the invert of the outlet at the longitudinal centerline of the embankment or from the bottom of the excavation at the longitudinal centerline of the dam, whichever is greatest. Jurisdictional height is defined in Rule 4.2.19. The State Engineer shall have final authority over determination of the jurisdictional height of the dam.
- API
DWR Livestock Water Tank and Erosion Control Dams
data.colorado.gov | Last Updated 2024-10-27T06:25:58.000ZLivestock water tanks are covered under the "Livestock Water Tank Act of Colorado" sections 35-49-101 to 35-49-116, C.R.S. These structures include all reservoirs built after April 17, 1941, on watercourses which the state engineer has determined to be "normally dry" and having a capacity of not more than ten acre-feet and a vertical height not exceeding fifteen feet from the bottom of the channel to the bottom of the spillway. Again, as with erosion control dams, the height is measured from the lowest point of the upstream toe to the crest of the spillway. No livestock water tanks can be used for irrigation purposes. Erosion control dams are governed under Colorado statute (see section 37-87-122, C.R.S. (1990). These types of structures may be constructed on water courses which have been determined by the state engineer to be normally dry (which for our purposes is dry more than 80% of the time). Structures of this type cannot exceed fifteen feet from the bottom of the channel to the bottom of the spillway and cannot exceed ten acre-feet at the emergency spillway level. The height of the dam is measured vertically from the lowest point of the upstream toe to the crest of the dam in contrast to those measured vertically from the centerline pursuant to section 37-87-105, C.R.S. (1990). Note: The structure can be larger than specified under section 37-87-122, however, it then will be evaluated and must be constructed pursuant to section 37-87-105.
- API
DWR Dam Safety Non-Jurisdictional Dam
data.colorado.gov | Last Updated 2024-10-27T06:02:38.000ZA Non-Jurisdictional Dam is a dam creating a reservoir with a capacity of 100 acre-feet or less and a surface area of 20 acres or less and with a height measured as defined in Rules 4.2.5.1 and 4.2.19 of 10 feet or less. Non-jurisdictional size dams are regulated and subject to the authority of the State Engineer consistent with sections 37- 87-102 and 37-87-105 C.R.S.
- API
Stormwater_Features
data.cityofgainesville.org | Last Updated 2024-04-10T19:07:06.000ZFor NPDES Stormwater sewer system enhanced mapping project. Contains a GIS polygon feature class of stormwater basins in Gainesville, FL as a result of the NPDES stormwater system mapping project. This feature does not participate in the GIS network, and is for cartographic purposes only. This file is current only up to 02/04/08 and may be incomplete, and only covers those areas of Gainesville, FL that have been mapped up to 02/04/08. The file is also subject to constant updating as project progresses. This feature class is for informational purposes only. Do not rely on this file for accuracy of dimensions, size or location. The City of Gainesville does not assume responsibility to update this information for any error or omission in this file. This shapefile may indicate the zoning/land use on the properties as shown. Do not rely on this file for accuracy of dimensions. For specific information, contact the City of Gainesville, Florida.
- API
ENERGY STAR Certified Water Heaters
data.energystar.gov | Last Updated 2024-10-27T13:29:46.000ZCertified models meet all ENERGY STAR requirements as listed in the Version 5.0 ENERGY STAR Program Requirements for Water Heaters that are effective April 18, 2023. A detailed listing of key efficiency criteria are available at https://www.energystar.gov/products/water_heaters/residential_water_heaters_key_product_criteria
- API
Permitted Dams in the State of Iowa
mydata.iowa.gov | Last Updated 2023-08-30T20:58:56.000ZPermitted dams in Iowa and associated attributes, as recorded by the Floodplain Section of the DNR. The dams regulated are those with the parameters listed below: a. Any dam designed to provide a sum of permanent and temporary storage exceeding 50 acre-feet at the top of dam elevation, or 25 acre-feet if the dam does not have an emergency spillway, and which has a height of 5 feet or more. b. Any dam designed to provide permanent storage in excess of 18 acre-feet and which has a height of 5 feet or more. c. Any dam located in or within 1 mile of an incorporated municipality, if the dam has a height of 10 feet or more, stores 10 acre-feet or more at the top of dam elevation, and is situated such that the discharge from the dam will flow through the incorporated area. d. Also regardless of dam height and storage, any urban area dam situated across a stream that has a drainage are of more than two square miles and any dam in a rural area situated across a stream that has a drainage area of more than 10 square mile. The generally known threshold is any dam that has a height of five feet or more and a permanent water storage volume of more than 18 acre-feet. The height is measure from the top of the dam to the lowest point on the downstream side of the dam, usually the streambed.
- API
Haiti Cover Crop Study Les Cayes 2018 - Eggplant PAR Leaf Area Index and Height Dataset
datahub.usaid.gov | Last Updated 2024-06-25T02:43:33.000ZThis dataset captures photosynthetically active radiation (PAR) penetrating the eggplant canopy, leaf area index (LAI) of the eggplant canopy, and heights of 5 eggplant plants per subplot. It contains 384 rows and 16 columns. This experiment looked at different cover crop performance grown in Les Cayes, Haiti and the subsequent crop of eggplant that was grown after the cover crop was incorporated into the soil. This research was conducted by USAID funded graduate student, Jean Maude Louizias, under the supervision of Dr. Carlene Chase.
- API
Parcel
data.bayareametro.gov | Last Updated 2024-10-16T14:05:35.000Z - API
Building Permits: Addition/Alteration
data.cambridgema.gov | Last Updated 2024-10-14T11:31:07.000ZList of permits related to the construction or the alteration of existing buildings in Cambridge. These permits cover construction that changes the structure, the footprint, or the volume of the building. This includes decks, porches, and additions, as well any reconstruction, renovation or repair to an existing structure. This dataset derives from Cambridge's ViewPoint permitting system.