- Population
The population density of The Acreage, FL was 971 in 2018.
Population Density
Population Density is computed by dividing the total population by Land Area Per Square Mile.
Above charts are based on data from the U.S. Census American Community Survey | ODN Dataset | API -
Geographic and Population Datasets Involving The Acreage, FL
- API
NYCHA Development Data Book
data.cityofnewyork.us | Last Updated 2024-05-13T15:53:04.000ZContains the main body of the "Development Data Book". The Development Data Book lists all of the Authority's Developments alphabetically and includes information on the development identification numbers, program and construction type, number of apartments and rental rooms, population, number of buildings and stories, street boundaries, and political districts.
- API
Vital Signs: Greenfield Development – Bay Area
data.bayareametro.gov | Last Updated 2020-07-03T16:37:00.000ZVITAL SIGNS INDICATOR Greenfield Development (LU5) FULL MEASURE NAME The acres of construction on previously undeveloped land LAST UPDATED November 2019 DESCRIPTION Greenfield development refers to construction on previously undeveloped land and the corresponding expansion of our region’s developed footprint, which includes the extent of urban and built-up lands. The footprint is defined as land occupied by structures, with a building density of at least 1 unit to 1.5 acres. DATA SOURCE Department of Conservation: Farmland Mapping and Monitoring Program GIS Data Tables/Layers (1990-2016) https://www.conservation.ca.gov/dlrp/fmmp U.S. Census Bureau: Decennial Census Population by Census Block Group (2000-2010) http://factfinder.census.gov U.S. Census Bureau: American Community Survey (5-year) Population by Census Block Group (2000-2017) http://factfinder.census.gov METHODOLOGY NOTES (across all datasets for this indicator) For regional and local data, FMMP maps the extent of “urban and built-up” lands, which generally reflect the developed urban footprint of the region. The footprint is defined as land occupied by structures with building density of at least 1 unit to 1.5 acres. Uses include residential, industrial, commercial, construction, institutional, public administration, railroad and other transportation yards, cemeteries, airports, golf courses, sanitary landfills, sewage treatment, water control structures, and other developed purposes. To determine the amount of greenfield development (in acres) occurring in a given two-year period, the differences in urban footprint are computed on a county-level. FMMP makes slight refinements to urban boundaries over time, so changes in urban footprint +/- 100 acres are not regionally significant. The GIS shapefile represents the 2016 urban footprint and thus does not show previously urbanized land outside of the footprint (i.e. Hamilton Air Force Base). For metro comparisons, a different methodology had to be used to avoid the geospatial limitations associated with FMMP. U.S. Census population by census block group was gathered for each metro area for 2000, 2010, and 2017. Population data for years 2000 and 2010 come from the Decennial Census while data for 2018 comes from the 2017 5-year American Community Survey. The block group was considered urbanized if its average/gross density was greater than 1 housing unit per acre (a slightly higher threshold than FMMP uses for its definition). Because a block group cannot be flagged as partially urbanized, and non-residential uses are not fully captured, the urban footprint of the region calculated with this methodology is smaller than in FMMP. The metro data should be primarily used for looking at comparative growth rate in greenfield development rather than the acreage totals themselves.
- API
Vital Signs: Greenfield Development – Bay Area shapefile
data.bayareametro.gov | Last Updated 2020-07-03T16:35:24.000ZVITAL SIGNS INDICATOR Greenfield Development (LU5) FULL MEASURE NAME The acres of construction on previously undeveloped land LAST UPDATED November 2019 DESCRIPTION Greenfield development refers to construction on previously undeveloped land and the corresponding expansion of our region’s developed footprint, which includes the extent of urban and built-up lands. The footprint is defined as land occupied by structures, with a building density of at least 1 unit to 1.5 acres. DATA SOURCE Department of Conservation: Farmland Mapping and Monitoring Program GIS Data Tables/Layers (1990-2016) https://www.conservation.ca.gov/dlrp/fmmp U.S. Census Bureau: Decennial Census Population by Census Block Group (2000-2010) http://factfinder.census.gov U.S. Census Bureau: American Community Survey (5-year) Population by Census Block Group (2000-2017) http://factfinder.census.gov METHODOLOGY NOTES (across all datasets for this indicator) For regional and local data, FMMP maps the extent of “urban and built-up” lands, which generally reflect the developed urban footprint of the region. The footprint is defined as land occupied by structures with building density of at least 1 unit to 1.5 acres. Uses include residential, industrial, commercial, construction, institutional, public administration, railroad and other transportation yards, cemeteries, airports, golf courses, sanitary landfills, sewage treatment, water control structures, and other developed purposes. To determine the amount of greenfield development (in acres) occurring in a given two-year period, the differences in urban footprint are computed on a county-level. FMMP makes slight refinements to urban boundaries over time, so changes in urban footprint +/- 100 acres are not regionally significant. The GIS shapefile represents the 2016 urban footprint and thus does not show previously urbanized land outside of the footprint (i.e. Hamilton Air Force Base). For metro comparisons, a different methodology had to be used to avoid the geospatial limitations associated with FMMP. U.S. Census population by census block group was gathered for each metro area for 2000, 2010, and 2017. Population data for years 2000 and 2010 come from the Decennial Census while data for 2018 comes from the 2017 5-year American Community Survey. The block group was considered urbanized if its average/gross density was greater than 1 housing unit per acre (a slightly higher threshold than FMMP uses for its definition). Because a block group cannot be flagged as partially urbanized, and non-residential uses are not fully captured, the urban footprint of the region calculated with this methodology is smaller than in FMMP. The metro data should be primarily used for looking at comparative growth rate in greenfield development rather than the acreage totals themselves.
- API
Vital Signs: Greenfield Development – by metro area
data.bayareametro.gov | Last Updated 2020-07-03T16:36:42.000ZVITAL SIGNS INDICATOR Greenfield Development (LU5) FULL MEASURE NAME The acres of construction on previously undeveloped land LAST UPDATED November 2019 DESCRIPTION Greenfield development refers to construction on previously undeveloped land and the corresponding expansion of our region’s developed footprint, which includes the extent of urban and built-up lands. The footprint is defined as land occupied by structures, with a building density of at least 1 unit to 1.5 acres. DATA SOURCE Department of Conservation: Farmland Mapping and Monitoring Program GIS Data Tables/Layers (1990-2016) https://www.conservation.ca.gov/dlrp/fmmp U.S. Census Bureau: Decennial Census Population by Census Block Group (2000-2010) http://factfinder.census.gov U.S. Census Bureau: American Community Survey (5-year) Population by Census Block Group (2000-2017) http://factfinder.census.gov METHODOLOGY NOTES (across all datasets for this indicator) For regional and local data, FMMP maps the extent of “urban and built-up” lands, which generally reflect the developed urban footprint of the region. The footprint is defined as land occupied by structures with building density of at least 1 unit to 1.5 acres. Uses include residential, industrial, commercial, construction, institutional, public administration, railroad and other transportation yards, cemeteries, airports, golf courses, sanitary landfills, sewage treatment, water control structures, and other developed purposes. To determine the amount of greenfield development (in acres) occurring in a given two-year period, the differences in urban footprint are computed on a county-level. FMMP makes slight refinements to urban boundaries over time, so changes in urban footprint +/- 100 acres are not regionally significant. The GIS shapefile represents the 2016 urban footprint and thus does not show previously urbanized land outside of the footprint (i.e. Hamilton Air Force Base). For metro comparisons, a different methodology had to be used to avoid the geospatial limitations associated with FMMP. U.S. Census population by census block group was gathered for each metro area for 2000, 2010, and 2017. Population data for years 2000 and 2010 come from the Decennial Census while data for 2018 comes from the 2017 5-year American Community Survey. The block group was considered urbanized if its average/gross density was greater than 1 housing unit per acre (a slightly higher threshold than FMMP uses for its definition). Because a block group cannot be flagged as partially urbanized, and non-residential uses are not fully captured, the urban footprint of the region calculated with this methodology is smaller than in FMMP. The metro data should be primarily used for looking at comparative growth rate in greenfield development rather than the acreage totals themselves.
- API
Vital Signs: Greenfield Development – by county
data.bayareametro.gov | Last Updated 2020-07-03T16:36:18.000ZVITAL SIGNS INDICATOR Greenfield Development (LU5) FULL MEASURE NAME The acres of construction on previously undeveloped land LAST UPDATED November 2019 DESCRIPTION Greenfield development refers to construction on previously undeveloped land and the corresponding expansion of our region’s developed footprint, which includes the extent of urban and built-up lands. The footprint is defined as land occupied by structures, with a building density of at least 1 unit to 1.5 acres. DATA SOURCE Department of Conservation: Farmland Mapping and Monitoring Program GIS Data Tables/Layers (1990-2016) https://www.conservation.ca.gov/dlrp/fmmp U.S. Census Bureau: Decennial Census Population by Census Block Group (2000-2010) http://factfinder.census.gov U.S. Census Bureau: American Community Survey (5-year) Population by Census Block Group (2000-2017) http://factfinder.census.gov METHODOLOGY NOTES (across all datasets for this indicator) For regional and local data, FMMP maps the extent of “urban and built-up” lands, which generally reflect the developed urban footprint of the region. The footprint is defined as land occupied by structures with building density of at least 1 unit to 1.5 acres. Uses include residential, industrial, commercial, construction, institutional, public administration, railroad and other transportation yards, cemeteries, airports, golf courses, sanitary landfills, sewage treatment, water control structures, and other developed purposes. To determine the amount of greenfield development (in acres) occurring in a given two-year period, the differences in urban footprint are computed on a county-level. FMMP makes slight refinements to urban boundaries over time, so changes in urban footprint +/- 100 acres are not regionally significant. The GIS shapefile represents the 2016 urban footprint and thus does not show previously urbanized land outside of the footprint (i.e. Hamilton Air Force Base). For metro comparisons, a different methodology had to be used to avoid the geospatial limitations associated with FMMP. U.S. Census population by census block group was gathered for each metro area for 2000, 2010, and 2017. Population data for years 2000 and 2010 come from the Decennial Census while data for 2018 comes from the 2017 5-year American Community Survey. The block group was considered urbanized if its average/gross density was greater than 1 housing unit per acre (a slightly higher threshold than FMMP uses for its definition). Because a block group cannot be flagged as partially urbanized, and non-residential uses are not fully captured, the urban footprint of the region calculated with this methodology is smaller than in FMMP. The metro data should be primarily used for looking at comparative growth rate in greenfield development rather than the acreage totals themselves.
- API
Surface Drinking Water Importance - Forests on the Edge_data
opendata.utah.gov | Last Updated 2024-04-10T19:40:35.000ZAmerica’s private forests provide a vast array of public goods and services, including abundant, clean surface water. Forest loss and development can affect water quality and quantity when forests are removed and impervious surfaces, such as paved roads, spread across the landscape. We rank watersheds across the conterminous United States according to the contributions of private forest land to surface drinking water and by threats to surface water from increased housing density. Private forest land contributions to drinking water are greatest in the East but are also important in Western watersheds. Development pressures on these contributions are concentrated in the Eastern United States but are also found in the North-Central region, parts of the West and Southwest, and the Pacific Northwest; nationwide, more than 55 million acres of rural private forest land are projected to experience a substantial increase in housing density from 2000 to 2030. Planners, communities, and private landowners can use a range of strategies to maintain freshwater ecosystems, including designing housing and roads to minimize impacts on water quality, managing home sites to protect water resources, and using payment schemes and management partnerships to invest in forest stewardship on public and private lands.This data is based on the digital hydrologic unit boundary layer to the Subwatershed (12-digit) 6th level for the continental United States. To focus this analysis on watersheds with private forests, only watersheds with at least 10% forested land and more than 50 acres of private forest were analyzed. All other watersheds were labeled “Insufficient private forest for this analysis"and coded -99999 in the data table. This dataset updates forest and development statistics reported in the the 2011 Forests to Faucet analysis using 2006 National Land Cover Database for the Conterminous United States, Grid Values=41,42,43,95. and Theobald, Dr. David M. 10 March 2008. bhc2000 and bhc2030 (Housing density for the coterminous US in 2000 and 2030, respectively.) Field Descriptions:HUC_12: Twelve Digit Hydrologic Unit Code: This field provides a unique 12-digit code for each subwatershed.HU_12_DS: Sixth Level Downstream Hydrologic Unit Code: This field was populated with the 12-digit code of the 6th level hydrologic unit that is receiving the majority of the flow from the subwatershed.IMP1: Index of surface drinking water importance (Appendix Map). This field is from the 2011 Forests to Faucet analysis and has not been updated for this analysis.HDCHG_AC: Acres of housing density change on private forest in the subwatershed. HDCHG_PER: Percent of the watershed to experience housing density change on private forest. IMP_HD_PFOR: Index Private Forest importance to Surface Drinking Water with Development Pressure - identifies private forested areas important for surface drinking water that are likely to be affected by future increases in housing density, Ptle_IMP_HD: Private Forest importance to Surface Drinking Water with Development Pressure (Figure 7), percentile. Ptle_HDCHG: Percentage of each subwatershed to Experience an increase in House Density in Private Forest (Figure 6), percentile. FOR_AC: Acres forest (2006) in the subwatershed. PFOR_AC: Acres private forest (2006) in the subwatershed. PFOR_PER: Percent of the subwatershed that is private forest. HU12_AC: Acreage of the subwatershedFOR_PER: Percent of the subwatershed that is forest. PFOR_IMP: Index of Private Forest Importance to Surface Drinking Water. .Ptle_PFIMP: Private forest importance to surface drinking water(Figure 4), percentile. TOP100: Top 100 subwatersheds. 50 from the East, 50 from the west (using the Mississippi River as the divide.) (Figure 8)TOP50EW: 1 = EAST; 2=WESTPoint of Contact: Rebecca Lilja GIS SpecialistForest ServiceNortheastern Area State and Private Forestryp: 603-868-7627 c: 603-953-4307 rlilja@fs.fed.us271 Mast Rd Durham, NH 03824