The land area of Priest River, ID was 4 in 2018. The land area of Elgin, OR was 1 in 2018.
Land Area
Water Area
Land area is a measurement providing the size, in square miles, of the land portions of geographic entities for which the Census Bureau tabulates and disseminates data. Area is calculated from the specific boundary recorded for each entity in the Census Bureau's geographic database. Land area is based on current information in the TIGER® data base, calculated for use with Census 2010.
Water Area figures include inland, coastal, Great Lakes, and territorial sea water. Inland water consists of any lake, reservoir, pond, or similar body of water that is recorded in the Census Bureau's geographic database. It also includes any river, creek, canal, stream, or similar feature that is recorded in that database as a two- dimensional feature (rather than as a single line). The portions of the oceans and related large embayments (such as Chesapeake Bay and Puget Sound), the Gulf of Mexico, and the Caribbean Sea that belong to the United States and its territories are classified as coastal and territorial waters; the Great Lakes are treated as a separate water entity. Rivers and bays that empty into these bodies of water are treated as inland water from the point beyond which they are narrower than 1 nautical mile across. Identification of land and inland, coastal, territorial, and Great Lakes waters is for data presentation purposes only and does not necessarily reflect their legal definitions.
Above charts are based on data from the U.S. Census American Community Survey | ODN Dataset | API -
Geographic and Area Datasets Involving Priest River, ID or Elgin, OR
- API
Water Levels and Flows
data.edmonton.ca | Last Updated 2024-10-24T19:29:01.000ZA combining of data from 23 Water Level and Flow monitoring stations from water areas in Alberta that directly influence the Water Level and Flow of the North Saskatchewan River. A combination of data from 3 Water Level and Flow monitoring stations from water areas in Albert that directly influence the Water Level and Flow of the Sturgeon River. This data is sourced from the Government of Alberta website and as such the Government of Alberta's disclaimer covers this data. Government of Alberta Disclaimer: Data provided through this web app is provisional and preliminary in nature. Data is automatically generated by remote equipment that may not be under control of the Government of Alberta. This data has not been reviewed or edited for accuracy and may be subject to significant change when reviewed or corrected. Please exercise caution and carefully consider the provisional nature of the information provided. The Government of Alberta assumes no responsibility for the accuracy or completeness of this data and any use of it is therefore, entirely at your own risk. Additional Government of Alberta "Provisional Data Disclaimer": Alberta Environment routinely collects real-time hydrometeorological data from meteorological and stream gauges using telephone and communications satellites to support its water resources management activities. These gauges are owned and operated by different organizations and partners outside the Alberta Government. Near Real-Time data provided at this site are provisional and preliminary in nature. They are automatically generated by remote equipment that may not be under Alberta Government control and have not been reviewed or edited for accuracy. These data may be subject to significant change when manually reviewed and corrected. The accuracy of the data can be affected by many factors including: - malfunction of recording equipment - algal and aquatic growth in the stream which affects the stage-discharge relationship - backwater from ice or debris such as log jams - changes to the stream bed geometry Please exercise caution and carefully consider the provisional nature of the information provided. The Government of Alberta assumes no responsibility for the accuracy or completeness of these data and any use of them is entirely at your own risk. “
- API
DWR Dam Safety Non-Jurisdictional Dam
data.colorado.gov | Last Updated 2024-10-24T06:02:39.000ZA Non-Jurisdictional Dam is a dam creating a reservoir with a capacity of 100 acre-feet or less and a surface area of 20 acres or less and with a height measured as defined in Rules 4.2.5.1 and 4.2.19 of 10 feet or less. Non-jurisdictional size dams are regulated and subject to the authority of the State Engineer consistent with sections 37- 87-102 and 37-87-105 C.R.S.
- API
DWR Dam Safety Jurisdictional Dam
data.colorado.gov | Last Updated 2024-10-24T06:04:40.000ZA Jurisdictional Dam is a dam creating a reservoir with a capacity of more than 100 acre-feet, or creates a reservoir with a surface area in excess of 20 acres at the high-water line, or exceeds 10 feet in height measured vertically from the elevation of the lowest point of the natural surface of the ground where that point occurs along the longitudinal centerline of the dam up to the crest of the emergency spillway of the dam. For reservoirs created by excavation, or where the invert of the outlet conduit is placed below the surface of the natural ground at its lowest point beneath the dam, the jurisdictional height shall be measured from the invert of the outlet at the longitudinal centerline of the embankment or from the bottom of the excavation at the longitudinal centerline of the dam, whichever is greatest. Jurisdictional height is defined in Rule 4.2.19. The State Engineer shall have final authority over determination of the jurisdictional height of the dam.
- API
Aquatic Biological Monitoring Sampling Locations: Beginning 1980
data.ny.gov | Last Updated 2024-05-02T15:02:49.000ZThe Division of Water Stream Biomonitoring Unit (SBU) dataset contains the point sampling locations at which benthic macroinvertebrates, field chemistry, and at some locations, sediment, fish or diatoms have been collected as part of the Rotating Integrated Basin Studies (RIBS) program, Rapid Biological Assessments (RAS), or special studies. The data collected are used for water quality assessment (input to the Waterbody Inventory, completion of the 305(b) report and 303(d) list of impaired Waters) and for track-down of water quality problems. The data set is maintained by the Division of Water, Bureau of Water Assessment and Management, Stream Biomonitoring Unit.
- API
Waterlines
data.bloomington.in.gov | Last Updated 2023-12-15T17:00:29.000Z<DIV STYLE="text-align:Left;"><DIV><DIV><P><SPAN>This map data layer represents area hydrology waterbody features for the City of Bloomington, Indiana. This includes lakes, ponds, and other water area features. </SPAN></P></DIV></DIV></DIV>
- API
Certified Annual Financial Report (CAFR) Data 2017
data.orcities.org | Last Updated 2019-04-23T03:41:40.000ZThis is the City Financial Data for fiscal year 2017. Note that this data has been expanded for FY2017 to include more detailed breakdown of city finances.
- API
Annual Financial Report (ACFR) Data 2018
data.orcities.org | Last Updated 2021-10-28T23:37:31.000ZThis is the City Financial Data for fiscal year 2017. Note that this data has been expanded for FY2018 to include more detailed breakdown of city finances.
- API
Water Quality Protection Charges
data.montgomerycountymd.gov | Last Updated 2024-10-01T05:06:49.000ZThe Water Quality Protection Charge (WQPC) is a line item on your property tax bill. WQPC funds many of the County's clean water initiatives including: • Restoration of eroded stream banks • Upgrades to stormwater ponds • Storm drain cleaning and maintenance • Stream monitoring • Litter control programs • Stormwater facility maintenance • Installation of rain barrels, rain gardens and green roofs The WQPC is calculated based on how much of your property is impervious (does not allow rain to be absorbed into the ground). As the county is developed, more area is covered in impervious concrete, asphalt, driveways, and buildings. Instead, that stormwater collects pollutants and runs off of the impervious surfaces causing damage to streams, rivers and the Chesapeake Bay. This is also known as stormwater pollution. The clean water initiatives funded by the WQPC remediate the environmental damage caused by stormwater pollution. Further, the WQPC funds programs that are needed to meet the National Pollutant Discharge Elimination System permit from the state of Maryland. Update Frequency : Annually
- API
Iowa Geographic Names
mydata.iowa.gov | Last Updated 2024-09-20T22:00:21.000ZThis dataset provides the geographic names data for Iowa. All names data products are extracted from the Geographic Names Information System (GNIS), the Federal Government's repository of official geographic names. The GNIS contains the federally recognized name of each feature and defines its location by State, county, USGS topographic map, and geographic coordinates. GNIS also lists variant names, which are non-official names by which a feature is or was known. Other attributes include unique Feature ID and feature class. Feature classes under the purview of the U.S. Board on Geographic Names include natural features, unincorporated populated places, canals, channels, reservoirs, and more.
- API
County Boundaries of Iowa
mydata.iowa.gov | Last Updated 2023-08-30T20:31:57.000ZThis dataset contains commonly used codes for counties and polygons representing boundaries for counties of the State of Iowa. Boundaries were developed from a set of 99 individual coverages of the Public Land Survey System (PLSS) for each county in the state. The PLSS coverages were digitized from paper copies of 7.5' topographic quadrangle maps. River boundaries were also digitized from 7.5' maps.