Empowered by Tyler Technologies
Refine Results

The population density of Austin, TX was 3,141 in 2018.

Population Density

Population Density is computed by dividing the total population by Land Area Per Square Mile.

Above charts are based on data from the U.S. Census American Community Survey | ODN Dataset | API - Notes:

1. ODN datasets and APIs are subject to change and may differ in format from the original source data in order to provide a user-friendly experience on this site.

2. To build your own apps using this data, see the ODN Dataset and API links.

3. If you use this derived data in an app, we ask that you provide a link somewhere in your applications to the Open Data Network with a citation that states: "Data for this application was provided by the Open Data Network" where "Open Data Network" links to http://opendatanetwork.com. Where an application has a region specific module, we ask that you add an additional line that states: "Data about REGIONX was provided by the Open Data Network." where REGIONX is an HREF with a name for a geographical region like "Seattle, WA" and the link points to this page URL, e.g. http://opendatanetwork.com/region/1600000US5363000/Seattle_WA

Geographic and Population Datasets Involving Austin, TX

  • API

    Austin Animal Center Outcomes

    datahub.austintexas.gov | Last Updated 2024-05-15T21:31:27.000Z

    Animal Center Outcomes from Oct, 1st 2013 to present. Outcomes represent the status of animals as they leave the Animal Center. All animals receive a unique Animal ID during intake. Annually over 90% of animals entering the center, are adopted, transferred to rescue or returned to their owners. The Outcomes data set reflects that Austin, TX. is the largest "No Kill" city in the country. This data set replaces all previous Animal Center Outcomes data sets.

  • API

    Waste Collection & Diversion Report (daily)

    datahub.austintexas.gov | Last Updated 2023-05-17T21:18:04.000Z

    Austin Resource Recovery daily report providing waste collection information based on the following categories: Report Date: The date collections information was recorded. Load Type: The specific type of load that is being collected on that day. Load Weight: The weight (in pounds) collected for each service on the day it was delivered to a diversion facility Drop off Site: The location where each type of waste is delivered for disposal, recycling or reuse: TDS Landfill indicates the Texas Disposal System landfill located at 12200 Carl Rd, Creedmoor, TX 78610; Balcones Recycling is a recycling facility located at 9301 Johnny Morris Road Austin, TX 78724; MRF is a Materials Recycling Facility (such as Texas Disposal Systems or Balcones Recycling); Hornsby Bend is located at 2210 FM 973, Austin, TX 78725 and accepts food scraps, yard trimmings, food-soiled paper and other materials collected by ARR, and combined with other waste to produce nutrient-rich dillo dirt, used for landscaping. Route Type: The general category of collection service provided by Austin Resource Recovery This information is used to help ARR reach its goals to transform waste into resources while keeping our community clean. For more information, visit www.austintexas.gov/department/austin-resource-recovery

  • API

    Short Term Rental Locations

    datahub.austintexas.gov | Last Updated 2024-05-15T17:33:41.000Z

    The general neighborhood and zip code location of short term rentals (including type) across Austin, TX. Lots of citizens have expressed interest in maintaining privacy of their exact address for safety reasons. So, keeping safety in mind, we've remove the specific address, but have included the street name and zip code. For more information, concerned parties can pursue a public information request: public.information@austintexas.gov. FYI: your request will not be considered received unless it is sent to the proper address.

  • API

    CPI 1.1 Texas Child Population (ages 0-17) by County 2014-2023

    data.texas.gov | Last Updated 2024-01-30T20:42:33.000Z

    As recommended by the Health and Human Services Commission (HHSC) to ensure consistency across all HHSC agencies, in 2012 DFPS adopted the HHSC methodology on how to categorize race and ethnicity. As a result, data broken down by race and ethnicity in 2012 and after is not directly comparable to race and ethnicity data in 2011 and before. The population totals may not match previously printed DFPS Data Books. Past population estimates are adjusted based on the U.S. Census data as it becomes available. This is important to keep the data in line with current best practices, but may cause some past counts, such as Abuse/Neglect Victims per 1,000 Texas Children, to be recalculated. Population Data Source - Population Estimates and Projections Program, Texas State Data Center, Office of the State Demographer and the Institute for Demographic and Socioeconomic Research, The University of Texas at San Antonio. Current population estimates and projections data as of December 2020. Visit dfps.texas.gov for information on all DFPS programs.

  • API

    Traffic and Pedestrian Signal Requests

    datahub.austintexas.gov | Last Updated 2024-03-25T18:37:53.000Z

    The dataset contains the ranking and status of traffic and pedestrian signal requests in Austin, TX.

  • API

    Demographics Stats at a Glance

    datahub.austintexas.gov | Last Updated 2023-09-19T21:56:30.000Z

    These are the statistics listed in the "Stats at a Glance" section of the City of Austin demographics website: https://demographics-austin.hub.arcgis.com/

  • API

    HE.C.2 Peer Cities Table V3

    datahub.austintexas.gov | Last Updated 2024-05-15T19:20:33.000Z

    PARD’s Long Range Plan for Land, Facilities and Programs, Our Parks, Our Future (adopted November 2019) compared Austin’s park system to five peer cities: Atlanta, GA, Dallas, TX, Portland, OR, San Antonio, TX, and San Diego, CA. The peer cities were selected based on characteristics such as population, size, density, and governance type. Portland and San Diego were selected as aspirational cities known for their park systems. Note that the table below presents each scoring area’s 1 to 100 index, where 100 is the highest possible score.

  • API

    Strategic Measure_EOA.C.6 Number and percentage of residents that are living in an area considered to be a Complete Community

    datahub.austintexas.gov | Last Updated 2024-03-26T17:39:18.000Z

    A resident in a complete community is someone residing in an area that is within a 20 minute walk to multiple essential destinations. Calculation method: This study measured the distance and time it takes for a pedestrian to reach five essential destination, or "indicators," from any point across the city using the existing network of sidewalks and crossings within a 20-minute walk time. Using GIS software, this evaluation resulted in a rasterized overlay of geographic outlines of “walksheds” surrounding each indicator destination. Residential estimates were found using an internal database of residential housing units and applied density assumptions and should not be compared to other demographic datasets. Data was sourced from City of Austin, CapMetro, and Austin ISD. View more details and insights related to this data set on the story page: https://data.austintexas.gov/stories/s/rw4g-mrjp

  • API

    Total Gallons of Water Pumped per Capita per Day (GPCD)

    datahub.austintexas.gov | Last Updated 2023-04-10T13:40:24.000Z

    This dataset calculates the annual average gallons of water pumped per capita per day (GPCD) as a measure of Austin’s water conservation efforts over time. GPCD is calculated as the total water pumped annually from Austin Water's potable water treatment plants, divided by Austin Water's estimated potable service area population and the number of days in the year. Data sources: Austin Water potable treatment plant meters, U.S. Census Bureau, City of Austin Customer Care & Billing System (CC&B), and the City of Austin Demographer. View more details and insights related to this dataset on the story page: https://data.austintexas.gov/stories/s/y6fs-auex

  • API

    Program Budget Operating Budget Vs Expense Raw Data

    datahub.austintexas.gov | Last Updated 2024-05-13T11:59:22.000Z

    City of Austin current budget fiscal year Operating Budget showing budget versus expenditures. This budget is at the Fund, Department, Unit level. This data set includes a build date and will be updated on a quarterly basis. The data contained in this data set is for informational purposes. Certain Austin Energy budget items have been excluded as competitive matters under Texas Government Code Section 552.133 and City Council Resolution 20051201-002. The comparison of actual expenditures to budget may appear inconsistent. That is because base wages for personnel are fully budgeted in the expense categories regular wages—full-time, regular wages—part-time or regular wages—civil service. The budget does not assume expenditure levels for the various leave categories, such as sick pay, vacation pay, or jury leave. However, actual expenses for various leave categories are recorded based on timesheet coding. The result is that actual expenditures for regular wages are spread across multiple expense categories while the budget is shown in one expense category. Personnel savings is budgeted to account for the likely savings in personnel costs generated through attrition. However, the savings is realized in the expense categories regular wages—full-time, regular wages—part-time and regular wages—civil service. Therefore, the actual expenditures in the personnel savings expense category will always be zero.