- API
Gridded Population of the World, Version 4 (GPWv4): Population Density, Revision 11
data.nasa.gov | Last Updated 2022-01-17T05:27:37.000ZThe Gridded Population of the World, Version 4 (GPWv4): Population Density, Revision 11 consists of estimates of human population density (number of persons per square kilometer) based on counts consistent with national censuses and population registers, for the years 2000, 2005, 2010, 2015, and 2020.�A proportional allocation gridding algorithm, utilizing approximately 13.5 million national and sub-national administrative Units, was used to assign population counts to 30 arc-second grid cells. The population density rasters were created by dividing the population count raster for a given target year by the land area raster. The data files were produced as global rasters at 30 arc-second (~1 km at the equator) resolution. To enable faster global processing, and in support of research commUnities, the 30 arc-second count data were aggregated to 2.5 arc-minute, 15 arc-minute, 30 arc-minute and 1 degree resolutions to produce density rasters at these resolutions.
- API
NEW HORIZONS SDC JUPITER ENCOUNTER CALIBRATED V4.0
data.nasa.gov | Last Updated 2023-01-26T20:41:44.000ZThis data set contains Calibrated data taken by the New Horizons Student Dust Counter instrument during the Jupiter encounter mission phase. This is VERSION 4.0 of this data set. For the Jupiter encounter mission phase, SDC collected no science data during the Jupiter flyby, as the requisite spacecraft configuration prevented SDC from operating. There were some very sparse data taken from December, 2006 through April, 2007, and some of very short (or zero) duration after the Jupiter flyby from April, 2007 through June, 2007. The changes in Version 4.0 were re-running of the ancillary data in the data product, updated geometry from newer SPICE kernels, minor editing of the documentation, catalogs, etc., and resolution of liens from the December, 2014 review, plus those from the May, 2016 review of the Pluto Encounter data sets. No new observations were added with Version 4.0.
- API
NEW HORIZONS SDC PLUTO CRUISE RAW V2.0
data.nasa.gov | Last Updated 2023-01-26T20:54:05.000ZThis data set contains Raw data taken by the New Horizons Student Dust Counter instrument during the pluto cruise mission phase. This is VERSION 2.0 of this data set. SDC collected science data intermittently during the hibernation years following the Jupiter encounter, designated as the PLUTOCRUISE phase. There were also Annual Checkouts (ACOs), STIM calibrations, Noise calibrations, and an anomaly in November, 2007. SDC's main science data collection periods were during hibernation. During ACOs, science data are taken intermittently but the user must be careful in analyzing these data since there is usually more activity on the spacecraft during hibernation. STIM and Noise refer to scheduled calibrations and are done with a regular cadence of one per year after the Jupiter encounter; they occurred sporadically in the early years of the mission. Note that some SDC data files have the same stop and start time and a zero exposure time. The reason for this is that the start and stop time for SDC data files are the event times for the first and last events in the files, so for files that contain a single event, these two values are the same. The changes in Version 2.0 were re-running of the ancillary data in the data product, updated geometry from newer SPICE kernels, minor editing of the documentation, catalogs, etc., and resolution of liens from the December, 2014 review, plus those from the May, 2016 review of the Pluto Encounter data sets. New observations added with this version (V2.0) include ongoing cruise observations from August, 2014 through January, 2015.
- API
West Africa Coastal Vulnerability Mapping: GPW Version 4 Population Growth, Preliminary Release 1, 2000-2010
data.nasa.gov | Last Updated 2022-01-17T06:03:26.000ZThe West Africa Coastal Vulnerability Mapping: GPW Version 4 Population Growth, Preliminary Release 1, 2000-2010, represents positive or negative growth in the number of persons per grid cell, and was calculated by subtracting an unreleased working version of the Gridded Population of the World (GPW), Version 4, year 2000 population count raster for the West Africa region from an unreleased working version of the GPWv4 year 2010 population count raster and cropping the result to within 200 kilometers of the coast. GPW provides globally consistent and spatially explicit human population information and data for use in research, policy making, and communications. This is a gridded (raster) data product that renders global population data at the scale and extent needed to demonstrate the spatial relationship of human populations and the environment globally. The gridded data set is constructed from national or subnational input Units (usually administrative Units) of varying resolutions. The native grid cell resolution of GPWv4 is 30 arc-second, or ~1 km at the equator.
- API
SBUV2/NOAA-17 Ozone (O3) Profile and Total Column Ozone 1 Month Zonal Mean L3 Global 5.0 degree Latitude Zones V1 (SBUV2N17L3zm) at GES DISC
data.nasa.gov | Last Updated 2022-01-17T05:51:02.000ZThe Solar Backscattered Ultraviolet (SBUV) from NOAA-17 Level-3 monthly zonal mean (MZM) product (SBUV2N17L3zm) is derived from the Level-2 retrieved ozone profiles. Ozone retrievals are generated from the v8.6 SBUV algorithm. A Level-3 MZM file computes zonal means covering 5 degree latitude bands for each calendar month. For this product there are 126 months of data from August 2002 through January 2013. There are a total of 36 latitudinal bands, 18 in each hemisphere. Profile data are provided at 21 layers from 1013.25, 639.318, 403.382,254.517, 160.589, 101.325,63.9317, 40.3382, 25.4517, 16.0589, 10.1325, 6.39317,4.03382, 2.54517, 1.60589, 1.01325,0.639317, 0.403382, 0.254517, 0.160589 and 0.101325 hPa (measured at bottom of layer). NOTE: Some profiles have 20 layers and do not report the top most layer. Mixing ratios are reported at 15 layers from 0.5, 0.7, 1.0, 1.5, 2.0, 3.0, 4.0, 5.0, 7.0, 10.0, 15.0, 20.0, 30.0, 40.0 and 50.0 hPa (measured at middle of layer). The MZM product averages retrievals that meet the criteria for a good retrieval as determined by error flags in the Level 2 data. A good retrieval is defined as satisfying the following conditions: 1) Profile Error Flag = 0 or 1 (0 = good retrieval; 1 = solar zenith angle > 84 degrees). 2) Total Error Flags = 0, 1, 2 or 5 (0 = good retrieval; 1 = not used; 2 = solar zenith angle > 84 degrees; large discrepancy between profile total and best total ozone). NOTE - Total error flag = 5 is anomalously applied at high latitudes and high solar zenith angles where the B-Pair total ozone estimate is not as reliable as the ozone profile under these conditions. This error flag may be removed in future version of algorithm. The zonal means computed for each month are screened according to the following statistical criteria: 1) Number of good retrievals for the month greater than or equal to 2/3 of the samples for a nominal month. 2) Mean latitude of good retrievals less than or equal to 1 degree from center of latitude band. 3) Mean time of good retrievals less than or equal to 4 days from center of month (i.e., day = 15).
- API
Gridded Population of the World, Version 4 (GPWv4): Population Density Adjusted to Match 2015 Revision UN WPP Country Totals, Revision 11
data.nasa.gov | Last Updated 2022-01-17T05:27:37.000ZThe Gridded Population of the World, Version 4 (GPWv4): Population Density Adjusted to Match 2015 Revision of UN WPP Country Totals, Revision 11 consists of estimates of human population density (number of persons per square kilometer) based on counts consistent with national censuses and population registers with respect to relative spatial distribution, but adjusted to match the 2015 Revision of the United Nation's World Population Prospects (UN WPP) country totals, for the years 2000, 2005, 2011, 2015, and 2020. A proportional allocation gridding algorithm, utilizing approximately 13.5 million national and sub-national administrative Units, was used to assign UN WPP-adjusted population counts to 30 arc-second grid cells. The density rasters were created by dividing the UN WPP-adjusted population count raster for a given target year by the land area raster. The data files were produced as global rasters at 30 arc-second (~1 km at the equator) resolution. To enable faster global processing, and in support of research commUnities, the 30 arc-second adjusted count data were aggregated to 2.5 arc-minute, 15 arc-minute, 30 arc-minute and 1 degree resolutions to produce density rasters at these resolutions.
- API
SBUV2/NOAA-16 Ozone (O3) Profile and Total Column Ozone 1 Month Zonal Mean L3 Global 5.0 degree Latitude Zones V1 (SBUV2N16L3zm) at GES DISC
data.nasa.gov | Last Updated 2022-01-17T05:51:01.000ZThe Solar Backscattered Ultraviolet (SBUV) from NOAA-16 Level-3 monthly zonal mean (MZM) product (SBUV2N16L3zm) is derived from the Level-2 retrieved ozone profiles. Ozone retrievals are generated from the v8.6 SBUV algorithm. A Level-3 MZM file computes zonal means covering 5 degree latitude bands for each calendar month. For this product there are 154 months of data from October 2000 through July 2013. There are a total of 36 latitudinal bands, 18 in each hemisphere. Profile data are provided at 21 layers from 1013.25, 639.318, 403.382,254.517, 160.589, 101.325,63.9317, 40.3382, 25.4517, 16.0589, 10.1325, 6.39317,4.03382, 2.54517, 1.60589, 1.01325,0.639317, 0.403382, 0.254517, 0.160589 and 0.101325 hPa (measured at bottom of layer). NOTE: Some profiles have 20 layers and do not report the top most layer. Mixing ratios are reported at 15 layers from 0.5, 0.7, 1.0, 1.5, 2.0, 3.0, 4.0, 5.0, 7.0, 10.0, 15.0, 20.0, 30.0, 40.0 and 50.0 hPa (measured at middle of layer). The MZM product averages retrievals that meet the criteria for a good retrieval as determined by error flags in the Level 2 data. A good retrieval is defined as satisfying the following conditions: 1) Profile Error Flag = 0 or 1 (0 = good retrieval; 1 = solar zenith angle > 84 degrees). 2) Total Error Flags = 0, 1, 2 or 5 (0 = good retrieval; 1 = not used; 2 = solar zenith angle > 84 degrees; large discrepancy between profile total and best total ozone). NOTE - Total error flag = 5 is anomalously applied at high latitudes and high solar zenith angles where the B-Pair total ozone estimate is not as reliable as the ozone profile under these conditions. This error flag may be removed in future version of algorithm. The zonal means computed for each month are screened according to the following statistical criteria: 1) Number of good retrievals for the month greater than or equal to 2/3 of the samples for a nominal month. 2) Mean latitude of good retrievals less than or equal to 1 degree from center of latitude band. 3) Mean time of good retrievals less than or equal to 4 days from center of month (i.e., day = 15).
- API
TRMM Microwave Imager Hydrometeor Profile L2 1.5 hours V7 (TRMM_2A12) at GES DISC
data.nasa.gov | Last Updated 2022-01-17T05:59:55.000ZThe new version of these data is in GPM-like format and can be found under the name GPM_2AGPROFTRMMTMI_CLIM. This dataset, 2A12, ”TMI Profiling”, generates surface rainfall and vertical hydrometeor profiles on a pixel by pixel basis from the TRMM Microwave Imager (TMI) brightness temperature data using the Goddard Profiling algorithm GPROF2010. Because the vertical information comes from a radiometer, it is not written out in independent vertical layers like the TRMM Precipitation Radar. Instead, the output is referenced to one of 100 typical structures for each hydrometeor or heating profile. These vertical structures are referenced as clusters in the output structure. Vertical hydrometeor profiles can be reconstructed to 28 layers by knowing the cluster number (i.e. shape) of the profile and a scale factor that is written for each pixel. This product contains hydrometeor profiles of cloud liquid water, precipitation water, cloud ice water, precipitation ice, rainfall type, and latent heating in 28 atmospheric layers. Changes in horizontal resolution resulting from the TRMM boost that occurred on 24 August 2001: Pre-Boost (before 7 August 2001): Temporal Resolution: 91.5 min/orbit ~ 16 orbits/day; Swath Width: 760 km; Horizontal Resolution: 4.4 km Post-Boost (after 24 August 2001): Temporal Resolution: 92.5 min/orbit ~ 16 orbits/day; Swath Width: 878 km; Horizontal Resolution: 5.1 km
- API
Population Exposure Estimates in Proximity to Nuclear Power Plants, Country-Level Aggregates
data.nasa.gov | Last Updated 2022-01-17T05:48:05.000ZThe Population Exposure Estimates in Proximity to Nuclear Power Plants, Country-Level Aggregates data set consists of country-level estimates of total, urban, and rural populations and land area, country-wide, that are in proximity to a nuclear power plant. This data set was created using a global data set of point locations of nuclear power plants, with buffer zones at 30km, 75km, 150km, 300km, 600km, and 1200km, and the Global Population Count Grid Time Series Estimates, Version 1 to estimate the population within each buffer zone for the years 1990, 2000, and 2010. Global Rural-Urban Mapping Project, Version 1 (GRUMPv1) Land and Geographic Unit Area Grids were used to estimate land area within each buffer zone. The GRUMPv1 Urban Extents Grid was used to further delineate population and land area estimates within urban and rural areas. All grids used for population, land area, and urban mask were of 1 km (30 arc-second) resolution.
- API
TES/Aura L2 Carbonyl Sulfide Nadir Special Observation V008
data.nasa.gov | Last Updated 2022-01-17T05:58:11.000ZTL2OCSNS_8 is the Tropospheric Emission Spectrometer (TES)/Aura Level 2 Atmospheric Temperatures Limb Version 8 data product. TES was an instrument aboard NASA's Aura satellite and was launched from California on July 15, 2004. Data collection for TES is complete. It consisted of information for one molecular species for an entire Global Survey or Special Observation. TES Level 2 data contained retrieved species (or temperature) profiles at the observation targets and the estimated errors. The geolocation, quality and other data (e.g., surface characteristics for nadir observations) were also provided. L2 modeled spectra were evaluated using radiative transfer modeling algorithms. The process, referred to as retrieval, compared observed spectra to the modeled spectra and iteratively updated the atmospheric parameters. L2 standard product files included information for one molecular species (or temperature) for an entire global survey or special observation run. A global survey consisted of a maximum of 16 consecutive orbits. Nadir and limb observations were in separate L2 files, and a single ancillary file was composed of data that are common to both nadir and limb files. A nadir sequence within the TES Global Survey was a fixed number of observations within an orbit for a Global Survey. Prior to April 24, 2005, it consisted of two low resolution scans over the same ground locations. After April 24, 2005, Global Survey data consisted of three low resolution scans. The Nadir standard product consists of four files, where each file is composed of the Global Survey Nadir observations from one of four focal planes for a single orbit, i.e. 72 orbit sequences. The Global Survey Nadir observations only used a single set of filter mix. A Global Survey consists of observations along 16 consecutive orbits at the start of a two day cycle, over which 3,200 retrievals were performed. Each observation was the input for retrievals of species volume mixing ratios (VMRs), temperature profiles, surface temperature and other data parameters with associated pressure levels, precision, total error, vertical resolution, total column density and other diagnostic quantities. Each TES Level 2 standard product reported information in a swath format conforming to the HDF-EOS Aura File Format Guidelines. Each Swath object wa bounded by the number of observations in a global survey and a predefined set of pressure levels representing slices through the atmosphere. Each standard product could have had a variable number of observations depending upon the Global Survey configuration and whether averaging is employed. Also, missing or bad retrievals were not reported. The organization of data within the Swath object was based on a superset of the Upper Atmosphere Research Satellite (UARS) pressure levels that was used to report concentrations of trace atmospheric gases. The reporting grid was the same pressure grid used for modeling. There were 67 reporting levels from 1211.53 hPa, which allowed for very high surface pressure conditions, to 0.1 hPa, about 65 km. In addition, the products reported values directly at the surface when possible or at the observed cloud top level. Thus in the Standard Product files each observation could potentially contain estimates for the concentration of a particular molecule at 67 different pressure levels within the atmosphere. However, for most retrieved profiles, the highest pressure levels were not observed due to a surface at lower pressure or cloud obscuration. For pressure levels corresponding to altitudes below the cloud top or surface, where measurements were not possible, a fill value was applied. To minimize the duplication of information between the individual species standard products, data fields common to each species (such as spacecraft coordinates, emissivity, and other data fields) have been collected into a separate standard product, termed the TES L2 Ancillary Data product (ESDT short name: TL2ANC). U