- API
ASO L4 Lidar Snow Water Equivalent 50m UTM Grid V001
data.nasa.gov | Last Updated 2022-01-17T05:08:23.000ZThis data set contains 50 m gridded snow water equivalent (SWE) values collected as part of the NASA/JPL Airborne Snow Observatory (ASO) aircraft survey campaigns. The data were derived from the <a href="https://nsidc.org/data/aso_50m_sd">ASO L4 Lidar Snow Depth 50m UTM Grid</a> data product and from modeled snow density.
- API
VIIRS/NPP BRDF/Albedo Snow Status Daily L3 Global 30ArcSec CMG V001
data.nasa.gov | Last Updated 2024-05-27T13:06:38.000ZThe NASA/NOAA Suomi National Polar-orbiting Partnership (Suomi NPP) Visible Infrared Imaging Radiometer Suite (VIIRS) Bidirectional Reflectance Distribution Function (BRDF) and Albedo Snow Status product (VNP43D52) is produced daily using 16 days of data at 30 arc second (1,000 meter) resolution. Data are temporally weighted to the ninth day, which is reflected in the file name. The VNP43D product suite is provided in a Climate Modeling Grid (CMG), which covers the entire globe for use in climate simulation models. Due to the large file size, each VNP43D product contains just one data layer for each of the parameters included in the VNP43MA2 (https://doi.org/10.5067/VIIRS/VNP43MA2.001) product. VNP43D40 through VNP43D53 are the 30 arc second BRDF/Albedo Quality values, the Local Solar Noon values, the Valid Observations of the moderate resolution bands (M1 through M5, M7, M8, M10, and M11) plus the Day/Night Band (DNB), the Snow Status, and the Uncertainty. Details regarding methodology are available on the VNP43MA2 product page and in the Algorithm Theoretical Basis Document (ATBD). VNP43D52 contains the snow status quality layer, which identifies each pixel as either “Snow-free Albedo Retrieved” or “Snow Albedo Retrieved” for the acquisition period.
- API
Contribution to High Asia Runoff from Ice and Snow (CHARIS) Melt Model Output, 2001 - 2014, Version 1
data.nasa.gov | Last Updated 2022-01-17T05:15:59.000ZThis data set contains input and output data for temperature index (TI) model runs completed for the Contributions to High Asia Runoff from Ice and Snow (CHARIS) project at NSIDC in 2018 and 2019. The input data are the area of snow on land, snow on ice, and exposed glacier ice as well as surface air temperature. These inputs are used to model the volumes of melt runoff from the snow on land, snow on ice, and exposed glacier ice in certain areas of High Mountain Asia.
- API
SBUV2/NOAA-16 Ozone (O3) Profile and Total Column Ozone 1 Month Zonal Mean L3 Global 5.0 degree Latitude Zones V1 (SBUV2N16L3zm) at GES DISC
data.nasa.gov | Last Updated 2022-01-17T05:51:01.000ZThe Solar Backscattered Ultraviolet (SBUV) from NOAA-16 Level-3 monthly zonal mean (MZM) product (SBUV2N16L3zm) is derived from the Level-2 retrieved ozone profiles. Ozone retrievals are generated from the v8.6 SBUV algorithm. A Level-3 MZM file computes zonal means covering 5 degree latitude bands for each calendar month. For this product there are 154 months of data from October 2000 through July 2013. There are a total of 36 latitudinal bands, 18 in each hemisphere. Profile data are provided at 21 layers from 1013.25, 639.318, 403.382,254.517, 160.589, 101.325,63.9317, 40.3382, 25.4517, 16.0589, 10.1325, 6.39317,4.03382, 2.54517, 1.60589, 1.01325,0.639317, 0.403382, 0.254517, 0.160589 and 0.101325 hPa (measured at bottom of layer). NOTE: Some profiles have 20 layers and do not report the top most layer. Mixing ratios are reported at 15 layers from 0.5, 0.7, 1.0, 1.5, 2.0, 3.0, 4.0, 5.0, 7.0, 10.0, 15.0, 20.0, 30.0, 40.0 and 50.0 hPa (measured at middle of layer). The MZM product averages retrievals that meet the criteria for a good retrieval as determined by error flags in the Level 2 data. A good retrieval is defined as satisfying the following conditions: 1) Profile Error Flag = 0 or 1 (0 = good retrieval; 1 = solar zenith angle > 84 degrees). 2) Total Error Flags = 0, 1, 2 or 5 (0 = good retrieval; 1 = not used; 2 = solar zenith angle > 84 degrees; large discrepancy between profile total and best total ozone). NOTE - Total error flag = 5 is anomalously applied at high latitudes and high solar zenith angles where the B-Pair total ozone estimate is not as reliable as the ozone profile under these conditions. This error flag may be removed in future version of algorithm. The zonal means computed for each month are screened according to the following statistical criteria: 1) Number of good retrievals for the month greater than or equal to 2/3 of the samples for a nominal month. 2) Mean latitude of good retrievals less than or equal to 1 degree from center of latitude band. 3) Mean time of good retrievals less than or equal to 4 days from center of month (i.e., day = 15).
- API
NEW HORIZONS SDC PLUTO CRUISE RAW V2.0
data.nasa.gov | Last Updated 2023-01-26T20:54:05.000ZThis data set contains Raw data taken by the New Horizons Student Dust Counter instrument during the pluto cruise mission phase. This is VERSION 2.0 of this data set. SDC collected science data intermittently during the hibernation years following the Jupiter encounter, designated as the PLUTOCRUISE phase. There were also Annual Checkouts (ACOs), STIM calibrations, Noise calibrations, and an anomaly in November, 2007. SDC's main science data collection periods were during hibernation. During ACOs, science data are taken intermittently but the user must be careful in analyzing these data since there is usually more activity on the spacecraft during hibernation. STIM and Noise refer to scheduled calibrations and are done with a regular cadence of one per year after the Jupiter encounter; they occurred sporadically in the early years of the mission. Note that some SDC data files have the same stop and start time and a zero exposure time. The reason for this is that the start and stop time for SDC data files are the event times for the first and last events in the files, so for files that contain a single event, these two values are the same. The changes in Version 2.0 were re-running of the ancillary data in the data product, updated geometry from newer SPICE kernels, minor editing of the documentation, catalogs, etc., and resolution of liens from the December, 2014 review, plus those from the May, 2016 review of the Pluto Encounter data sets. New observations added with this version (V2.0) include ongoing cruise observations from August, 2014 through January, 2015.
- API
Northern Hemisphere Snow Cover Monthly Statistics at 1 Degree Resolution V001 (NHSNOWM) at GES DISC
data.nasa.gov | Last Updated 2022-01-17T05:45:22.000ZThis product is Snow Cover Statistics. The dataset was prepared by Dr. Peter Romanov at Cooperative Institute for Climate Studies(CICS) of the University of Maryland for Northern Eurasia Earth Science Partnership Initiative (NEESPI) program. The product includes the monthly snow statistics (frequency of occurrence) for Northern Hemisphere at 1x1 degree spatial resolution. The dataset covers the time period from January 2000 to November 2014. Monthly data were derived from daily snow cover charts produced at NOAA/NESDIS within Interactive Multisensor Ice Mapping System (IMS).
- API
SBUV2/NOAA-17 Ozone (O3) Profile and Total Column Ozone 1 Month Zonal Mean L3 Global 5.0 degree Latitude Zones V1 (SBUV2N17L3zm) at GES DISC
data.nasa.gov | Last Updated 2022-01-17T05:51:02.000ZThe Solar Backscattered Ultraviolet (SBUV) from NOAA-17 Level-3 monthly zonal mean (MZM) product (SBUV2N17L3zm) is derived from the Level-2 retrieved ozone profiles. Ozone retrievals are generated from the v8.6 SBUV algorithm. A Level-3 MZM file computes zonal means covering 5 degree latitude bands for each calendar month. For this product there are 126 months of data from August 2002 through January 2013. There are a total of 36 latitudinal bands, 18 in each hemisphere. Profile data are provided at 21 layers from 1013.25, 639.318, 403.382,254.517, 160.589, 101.325,63.9317, 40.3382, 25.4517, 16.0589, 10.1325, 6.39317,4.03382, 2.54517, 1.60589, 1.01325,0.639317, 0.403382, 0.254517, 0.160589 and 0.101325 hPa (measured at bottom of layer). NOTE: Some profiles have 20 layers and do not report the top most layer. Mixing ratios are reported at 15 layers from 0.5, 0.7, 1.0, 1.5, 2.0, 3.0, 4.0, 5.0, 7.0, 10.0, 15.0, 20.0, 30.0, 40.0 and 50.0 hPa (measured at middle of layer). The MZM product averages retrievals that meet the criteria for a good retrieval as determined by error flags in the Level 2 data. A good retrieval is defined as satisfying the following conditions: 1) Profile Error Flag = 0 or 1 (0 = good retrieval; 1 = solar zenith angle > 84 degrees). 2) Total Error Flags = 0, 1, 2 or 5 (0 = good retrieval; 1 = not used; 2 = solar zenith angle > 84 degrees; large discrepancy between profile total and best total ozone). NOTE - Total error flag = 5 is anomalously applied at high latitudes and high solar zenith angles where the B-Pair total ozone estimate is not as reliable as the ozone profile under these conditions. This error flag may be removed in future version of algorithm. The zonal means computed for each month are screened according to the following statistical criteria: 1) Number of good retrievals for the month greater than or equal to 2/3 of the samples for a nominal month. 2) Mean latitude of good retrievals less than or equal to 1 degree from center of latitude band. 3) Mean time of good retrievals less than or equal to 4 days from center of month (i.e., day = 15).
- API
West Africa Coastal Vulnerability Mapping: GPW Version 4 Population Growth, Preliminary Release 1, 2000-2010
data.nasa.gov | Last Updated 2022-01-17T06:03:26.000ZThe West Africa Coastal Vulnerability Mapping: GPW Version 4 Population Growth, Preliminary Release 1, 2000-2010, represents positive or negative growth in the number of persons per grid cell, and was calculated by subtracting an unreleased working version of the Gridded Population of the World (GPW), Version 4, year 2000 population count raster for the West Africa region from an unreleased working version of the GPWv4 year 2010 population count raster and cropping the result to within 200 kilometers of the coast. GPW provides globally consistent and spatially explicit human population information and data for use in research, policy making, and communications. This is a gridded (raster) data product that renders global population data at the scale and extent needed to demonstrate the spatial relationship of human populations and the environment globally. The gridded data set is constructed from national or subnational input Units (usually administrative Units) of varying resolutions. The native grid cell resolution of GPWv4 is 30 arc-second, or ~1 km at the equator.
- API
Classification of Aeronautics System Health and Safety Documents
data.nasa.gov | Last Updated 2020-01-29T01:57:57.000ZMost complex aerospace systems have many text reports on safety, maintenance, and associated issues. The Aviation Safety Reporting System (ASRS) spans several decades and contains over 700 000 reports. The Aviation Safety Action Plan (ASAP) contains over 12 000 reports from various airlines. Problem categorizations have been developed for both ASRS and ASAP to enable identification of system problems. However, repository volume and complexity make human analysis difficult. Multiple experts are needed, and they often disagree on classifications. Even the same person has classified the same document differently at different times due to evolving experiences. Consistent classification is necessary to support tracking trends in problem categories over time. A decision support system that performs consistent document classification quickly and over large repositories would be useful. We discuss the results of two algorithms we have developed to classify ASRS and ASAP documents. The first is Mariana---a support vector machine (SVM) with simulated annealing, which is used to optimize hyperparameters for the model. The second method is classification built on top of nonnegative matrix factorization (NMF), which attempts to find a model that represents document features that add up in various combinations to form documents. We tested both methods on ASRS and ASAP documents with the latter categorized two different ways. We illustrate the potential of NMF to provide document features that are interpretable and indicative of topics. We also briefly discuss the tool that we have incorporated Mariana into in order to allow human experts to provide feedback on the document categorizations.
- API
MODIS/Terra+Aqua BRDF/Albedo Gap-Filled Snow-Free Daily L3 Global 30ArcSec CMG V006
data.nasa.gov | Last Updated 2024-05-20T13:05:25.000ZThe Daily Moderate Resolution Imaging Spectroradiometer (MODIS) (Bidirectional Reflectance Distribution Function and Albedo (BRDF/Albedo) 30 arc second, Global Gap-Filled, Snow-Free, (MCD43GF) Version 6 is derived from the 30 arc second Climate Modeling Grid (CMG) MCD43D Version 6 product suite, with additional processing to provide a gap-filled, snow-free product. The highest quality full inversion values were used for the temporal fitting effort and supplemented with lower quality pixels, spatial fitting, and spatial smoothing as needed. The status of each pixel can be found in the quality layer for each band. To generate a snow-free product, pixels with ephemeral snow were removed using the MCD43D41 (https://doi.org/10.5067/MODIS/MCD43D41.006) snow flags. The underlying MCD43D utilizes a BRDF model derived from all available high quality cloud clear reflectance data over a 16 day moving window centered on and emphasizing the daily day of interest (the ninth day of each retrieval period as reflected in the Julian date in the filename). This 30arc second BRDF model is then used to produce the Albedo and NBAR products (MCD43D). These BRDF model parameters are computed for MODIS spectral bands 1 through 7 (0.47 um, 0.55 um, 0.67 um, 0.86 um, 1.24 um, 1.64 um, 2.1 um), as well as the shortwave infrared band (0.3-5.0um), visible band (0.3-0.7 um), and near-infrared (0.7-5.0 um) broad bands. The MCD43GF product includes 67 layers containing black-sky albedo (BSA) at local solar noon, isotropic (ISO), volumetric (VOL), geometric (GEO), quality (QA), Nadir BRDF-Adjusted Reflectance (NBAR) at local solar noon, and white-sky albedo (WSA). Due to the large file size, each data layer is distributed as a separate HDF file. Users are encouraged to download the quality layers for each of the 10 bands to check quality assessment information before using the BRDF/Albedo data. Users are urged to use the band specific quality flags to isolate the highest quality full inversion results for their own science applications (https://www.umb.edu/spectralmass/terra_aqua_modis/v006). The MCD43 product is not recommended for solar zenith angles beyond 70 degrees. The MODIS BRDF/Albedo products have achieved stage 3 (https://landweb.modaps.eosdis.nasa.gov/cgi-bin/QA_WWW/newPage.cgi?fileName=maturity) validation. Improvements/Changes from Previous Versions Observations are weighted to estimate the BRDF/Albedo on the ninth day of the 16-day period. * MCD43 products use the snow status weighted to the ninth day instead of the majority snow/no-snow observations from the 16-day period. * Better quality at high latitudes from use of all available observations for the acquisition period. Collection 5 used only four observations per day. * The MCD43 products use L2G-lite surface reflectance as input. * In cases where insufficient high-quality reflectances are obtained, a database with archetypal BRDF parameters is used to supplement the observational data and perform a lower quality magnitude inversion. This database is continually updated with the latest full inversion retrieval for each pixel. * CMG Albedo is estimated using all the clear-sky observations within the 1,000 m grid as opposed to aggregating from the 500 m albedo. Important Quality Information The incorrect representation of the aerosol quantities (low average high) in the C6 MYD09 and MOD09 surface reflectance products may have impacted down stream products particularly over arid bright surfaces (https://landweb.modaps.eosdis.nasa.gov/cgi-bin/QA_WWW/displayCase.cgi?esdt=MOD09&caseNum=PM_MOD09_20010&caseLocation=cases_data&type=C6). This (and a few other issues) have been corrected for C6.1. Therefore users should avoid substantive use of the C6 MCD43 products and wait for the C6.1 products. In any event, users are always strongly encouraged to download and use the extensive QA data provided in MCD43A2, in addition to the briefer mandatory QAs provided as part of the