- API
SBUV2/NOAA-17 Ozone (O3) Profile and Total Column Ozone 1 Month Zonal Mean L3 Global 5.0 degree Latitude Zones V1 (SBUV2N17L3zm) at GES DISC
data.nasa.gov | Last Updated 2022-01-17T05:51:02.000ZThe Solar Backscattered Ultraviolet (SBUV) from NOAA-17 Level-3 monthly zonal mean (MZM) product (SBUV2N17L3zm) is derived from the Level-2 retrieved ozone profiles. Ozone retrievals are generated from the v8.6 SBUV algorithm. A Level-3 MZM file computes zonal means covering 5 degree latitude bands for each calendar month. For this product there are 126 months of data from August 2002 through January 2013. There are a total of 36 latitudinal bands, 18 in each hemisphere. Profile data are provided at 21 layers from 1013.25, 639.318, 403.382,254.517, 160.589, 101.325,63.9317, 40.3382, 25.4517, 16.0589, 10.1325, 6.39317,4.03382, 2.54517, 1.60589, 1.01325,0.639317, 0.403382, 0.254517, 0.160589 and 0.101325 hPa (measured at bottom of layer). NOTE: Some profiles have 20 layers and do not report the top most layer. Mixing ratios are reported at 15 layers from 0.5, 0.7, 1.0, 1.5, 2.0, 3.0, 4.0, 5.0, 7.0, 10.0, 15.0, 20.0, 30.0, 40.0 and 50.0 hPa (measured at middle of layer). The MZM product averages retrievals that meet the criteria for a good retrieval as determined by error flags in the Level 2 data. A good retrieval is defined as satisfying the following conditions: 1) Profile Error Flag = 0 or 1 (0 = good retrieval; 1 = solar zenith angle > 84 degrees). 2) Total Error Flags = 0, 1, 2 or 5 (0 = good retrieval; 1 = not used; 2 = solar zenith angle > 84 degrees; large discrepancy between profile total and best total ozone). NOTE - Total error flag = 5 is anomalously applied at high latitudes and high solar zenith angles where the B-Pair total ozone estimate is not as reliable as the ozone profile under these conditions. This error flag may be removed in future version of algorithm. The zonal means computed for each month are screened according to the following statistical criteria: 1) Number of good retrievals for the month greater than or equal to 2/3 of the samples for a nominal month. 2) Mean latitude of good retrievals less than or equal to 1 degree from center of latitude band. 3) Mean time of good retrievals less than or equal to 4 days from center of month (i.e., day = 15).
- API
Nano Dust Analyzer Project
data.nasa.gov | Last Updated 2020-01-29T04:54:41.000Z<p> We propose to develop a new highly sensitive instrument to confirm the existence of the so-called nano-dust particles, characterize their impact parameters, and measure their chemical composition. Simultaneous theoretical studies will be used to derive the expected&nbsp; mass and velocity ranges of these putative particles to formulate science and measurement requirements for the future deployment of&nbsp; the proposed Nano-Dust Analyzer (NDA)&nbsp;</p> <p> Early dust instruments onboard Pioneer 8 and 9 and Helios spacecraft detected a flow of submicron sized dust particles coming from the direction of the Sun. These particles originate in the inner solar system from mutual collisions among meteoroids and move on&nbsp; hyperbolic orbits that leave the Solar System under the prevailing radiation pressure force. Later dust instruments with higher&nbsp; sensitivity had to avoid looking toward the Sun because of interference from the solar wind and UV radiation and thus contributed&nbsp; little to the characterization of the dust stream. The one exception is the Ulysses dust detector that observed escaping dust particles&nbsp; high above the solar poles, which confirm the suspicion that charged nanometer sized dust grains are carried to high heliographic&nbsp; latitudes by electromagnetic interactions with the Interplanetary Magnetic Field (IMF). Recently, the STEREO WAVES instruments&nbsp; recorded a large number of intense electric field signals, which were interpreted as impacts from nanometer sized particles striking the&nbsp; spacecraft with velocities of about the solar wind speed. This high flux and strong spatial and/or temporal variations of nanometer&nbsp; sized dust grains at low latitude appears to be uncorrelated with the solar wind properties. This is a mystery as it would require that&nbsp; the total collisional meteoroid debris inside 1 AU is cast in nanometer sized fragments. The observed fluxes of inner-source pickup ions&nbsp; also point to the existence of a much enhanced dust population in the nanometer size range.&nbsp;</p> <p> This new heliospherical phenomenon of nano-dust streams may have consequences throughout the planetary system, but as of yet no dust instrument exists that could be used to shed light on their properties. &nbsp;We propose to develop a dust analyzer capable to detect and&nbsp; analyze these mysterious dust particles coming from the solar direction and to embark upon complementary theoretical studies to&nbsp; understand their characteristics. The instrument is based on the Cassini Dust Analyzer (CDA) that has analyzed the composition of&nbsp; nanometer sized dust particles emanating from the Jovian and Saturnian systems but could not be pointed towards the Sun. By&nbsp; applying technologies implemented in solar wind instruments and coronagraphs a highly sensitive dust analyzer will be developed and&nbsp; tested in the laboratory. The dust analyzer shall be able to characterize impact properties (impact charge and energy distribution of&nbsp; ions from which mass and speed of the impacting grains may be derived) and chemical composition of individual nanometer sized&nbsp; particles while exposed to solar wind and UV radiation. The measurements will enable us to identify the source of the dust by&nbsp; comparing their elemental composition with that of larger micrometeoroid particles of cometary and asteroid origin and will reveal&nbsp; interaction of nano-dust with the interplanetary medium by investigating the relation of the dust flux with solar wind and IMF&nbsp; properties.&nbsp;</p> <p> Complementary theoretically studies will be performed to understand the characteristics of nano-dust particles at 1 AU to answer the&nbsp; following questions:&nbsp; - What is the speed range at which nanometer sized particles impact
- API
SBUV2/NOAA-16 Ozone (O3) Profile and Total Column Ozone 1 Month Zonal Mean L3 Global 5.0 degree Latitude Zones V1 (SBUV2N16L3zm) at GES DISC
data.nasa.gov | Last Updated 2022-01-17T05:51:01.000ZThe Solar Backscattered Ultraviolet (SBUV) from NOAA-16 Level-3 monthly zonal mean (MZM) product (SBUV2N16L3zm) is derived from the Level-2 retrieved ozone profiles. Ozone retrievals are generated from the v8.6 SBUV algorithm. A Level-3 MZM file computes zonal means covering 5 degree latitude bands for each calendar month. For this product there are 154 months of data from October 2000 through July 2013. There are a total of 36 latitudinal bands, 18 in each hemisphere. Profile data are provided at 21 layers from 1013.25, 639.318, 403.382,254.517, 160.589, 101.325,63.9317, 40.3382, 25.4517, 16.0589, 10.1325, 6.39317,4.03382, 2.54517, 1.60589, 1.01325,0.639317, 0.403382, 0.254517, 0.160589 and 0.101325 hPa (measured at bottom of layer). NOTE: Some profiles have 20 layers and do not report the top most layer. Mixing ratios are reported at 15 layers from 0.5, 0.7, 1.0, 1.5, 2.0, 3.0, 4.0, 5.0, 7.0, 10.0, 15.0, 20.0, 30.0, 40.0 and 50.0 hPa (measured at middle of layer). The MZM product averages retrievals that meet the criteria for a good retrieval as determined by error flags in the Level 2 data. A good retrieval is defined as satisfying the following conditions: 1) Profile Error Flag = 0 or 1 (0 = good retrieval; 1 = solar zenith angle > 84 degrees). 2) Total Error Flags = 0, 1, 2 or 5 (0 = good retrieval; 1 = not used; 2 = solar zenith angle > 84 degrees; large discrepancy between profile total and best total ozone). NOTE - Total error flag = 5 is anomalously applied at high latitudes and high solar zenith angles where the B-Pair total ozone estimate is not as reliable as the ozone profile under these conditions. This error flag may be removed in future version of algorithm. The zonal means computed for each month are screened according to the following statistical criteria: 1) Number of good retrievals for the month greater than or equal to 2/3 of the samples for a nominal month. 2) Mean latitude of good retrievals less than or equal to 1 degree from center of latitude band. 3) Mean time of good retrievals less than or equal to 4 days from center of month (i.e., day = 15).
- API
West Africa Coastal Vulnerability Mapping: GPW Version 4 Population Growth, Preliminary Release 1, 2000-2010
data.nasa.gov | Last Updated 2022-01-17T06:03:26.000ZThe West Africa Coastal Vulnerability Mapping: GPW Version 4 Population Growth, Preliminary Release 1, 2000-2010, represents positive or negative growth in the number of persons per grid cell, and was calculated by subtracting an unreleased working version of the Gridded Population of the World (GPW), Version 4, year 2000 population count raster for the West Africa region from an unreleased working version of the GPWv4 year 2010 population count raster and cropping the result to within 200 kilometers of the coast. GPW provides globally consistent and spatially explicit human population information and data for use in research, policy making, and communications. This is a gridded (raster) data product that renders global population data at the scale and extent needed to demonstrate the spatial relationship of human populations and the environment globally. The gridded data set is constructed from national or subnational input Units (usually administrative Units) of varying resolutions. The native grid cell resolution of GPWv4 is 30 arc-second, or ~1 km at the equator.
- API
TRMM Microwave Imager Hydrometeor Profile L2 1.5 hours V7 (TRMM_2A12) at GES DISC
data.nasa.gov | Last Updated 2022-01-17T05:59:55.000ZThe new version of these data is in GPM-like format and can be found under the name GPM_2AGPROFTRMMTMI_CLIM. This dataset, 2A12, ”TMI Profiling”, generates surface rainfall and vertical hydrometeor profiles on a pixel by pixel basis from the TRMM Microwave Imager (TMI) brightness temperature data using the Goddard Profiling algorithm GPROF2010. Because the vertical information comes from a radiometer, it is not written out in independent vertical layers like the TRMM Precipitation Radar. Instead, the output is referenced to one of 100 typical structures for each hydrometeor or heating profile. These vertical structures are referenced as clusters in the output structure. Vertical hydrometeor profiles can be reconstructed to 28 layers by knowing the cluster number (i.e. shape) of the profile and a scale factor that is written for each pixel. This product contains hydrometeor profiles of cloud liquid water, precipitation water, cloud ice water, precipitation ice, rainfall type, and latent heating in 28 atmospheric layers. Changes in horizontal resolution resulting from the TRMM boost that occurred on 24 August 2001: Pre-Boost (before 7 August 2001): Temporal Resolution: 91.5 min/orbit ~ 16 orbits/day; Swath Width: 760 km; Horizontal Resolution: 4.4 km Post-Boost (after 24 August 2001): Temporal Resolution: 92.5 min/orbit ~ 16 orbits/day; Swath Width: 878 km; Horizontal Resolution: 5.1 km
- API
Gridded Population of the World, Version 4 (GPWv4): Population Density, Revision 11
data.nasa.gov | Last Updated 2022-01-17T05:27:37.000ZThe Gridded Population of the World, Version 4 (GPWv4): Population Density, Revision 11 consists of estimates of human population density (number of persons per square kilometer) based on counts consistent with national censuses and population registers, for the years 2000, 2005, 2010, 2015, and 2020.�A proportional allocation gridding algorithm, utilizing approximately 13.5 million national and sub-national administrative Units, was used to assign population counts to 30 arc-second grid cells. The population density rasters were created by dividing the population count raster for a given target year by the land area raster. The data files were produced as global rasters at 30 arc-second (~1 km at the equator) resolution. To enable faster global processing, and in support of research commUnities, the 30 arc-second count data were aggregated to 2.5 arc-minute, 15 arc-minute, 30 arc-minute and 1 degree resolutions to produce density rasters at these resolutions.
- API
Metrics for Offline Evaluation of Prognostic Performance
data.nasa.gov | Last Updated 2020-01-29T01:57:42.000ZPrognostic performance evaluation has gained significant attention in the past few years.*Currently, prognostics concepts lack standard definitions and suffer from ambiguous and inconsistent interpretations. This lack of standards is in part due to the varied end- user requirements for different applications, time scales, available information, domain dynamics, etc. to name a few. The research community has used a variety of metrics largely based on convenience and their respective requirements. Very little attention has been focused on establishing a standardized approach to compare different efforts. This paper presents several new evaluation metrics tailored for prognostics that were recently introduced and were shown to effectively evaluate various algorithms as compared to other conventional metrics. Specifically, this paper presents a detailed discussion on how these metrics should be interpreted and used. These metrics have the capability of incorporating probabilistic uncertainty estimates from prognostic algorithms. In addition to quantitative assessment they also offer a comprehensive visual perspective that can be used in designing the prognostic system. Several methods are suggested to customize these metrics for different applications. Guidelines are provided to help choose one method over another based on distribution characteristics. Various issues faced by prognostics and its performance evaluation are discussed followed by a formal notational framework to help standardize subsequent developments.
- API
Global gene expression analysis highlights microgravity sensitive key genes in soleus and EDL of 30 days space flown mice
data.nasa.gov | Last Updated 2023-01-26T18:49:58.000ZMicrogravity exposure as well as chronic muscle disuse are two of the main causes of physiological adaptive skeletal muscle atrophy in humans and murine animals in physiological condition. The aim of this study was to investigate at both morphological and global gene expression level skeletal muscle adaptation to microgravity in mouse soleus and extensor digitorum longus (EDL). Adult male mice C57BL/N6 were flown aboard the BION-M1 biosatellite for 30 days on orbit (BF) or housed in a replicate flight habitat on Earth (BG) as reference flight control. In this study we investigated for the first time gene expression adaptation to 30 days of microgravity exposure in mouse soleus and EDL highlighting potential new targets for improvement of countermeasures able to ameliorate or even prevent microgravity-induced atrophy in future spaceflights. Overall Design: C57BL/N6 mice were randomly divided in 3 groups: Bion Flown (BF) mice flown aboard the Bion M1 biosatellite in microgravity environment for 30 days; Bion Ground (BG) mice housed in the same habitat of flown animals but exposed to earth gravity; and Flight Control (FC) mice housed in a standard animal facility.
- API
MODIS/Terra Temperature and Water Vapor Profiles 5-Min L2 Swath 5km - NRT
data.nasa.gov | Last Updated 2023-07-24T13:06:00.000ZThe level-2 MODIS Temperature and Water Vapor Profile Product MOD07_L2 consists of 30 gridded parameters related to atmospheric stability, atmospheric temperature and moisture profiles, total atmospheric water vapor, and total ozone. All of these parameters are produced for both daytime and nighttime conditions at 5-km pixel resolution when at least 9 FOVs are cloud free. The atmospheric profiles are produced at 20 vertical atmospheric levels (5., 10., 20., 30., 50., 70., 100., 150., 200., 250., 300., 400., 500., 620., 700., 780., 850., 920., 950., 1000. mbar) The water vapor parameter is an estimate of the total tropospheric column water vapor made from integrated MODIS infrared retrievals of atmospheric moisture profiles in clear scenes. The thermal band 9.6 micron is used for retrieving total ozone burden. The shortname for this Level-2 MODIS atmospheric profile product is MOD07_L2 and the principal investigator for this product is MODIS scientist Dr. Paul Menzel ( paulm@ssec.wisc.edu).The MODIS atmospheric profile (MOD07_L2) product contains data that has a spatial resolution (pixel size) of 5 x 5 kilometers (at nadir). Each MOD07_L2 product file covers a five-minute time interval, which means the MOD07_L2 output grid is 270 5-km pixels in width and 406 5-km pixels in length for nine consecutive granules. Every tenth granule has an output grid size of 270 by 408 pixels. MOD07_L2 product files are stored in Hierarchical Data Format(HDF-EOS). Twenty eight of the 30 gridded cloud parameters(5-kilometer pixel resolution) are stored as Scientific Data Sets (SDS) within the file, the remaining two algorithmic static parameters (band number and presure level) are stored as Vdata(table arrays). Cloud Mask SDS, derived from the 1-km MOD35_L2 Cloud Mask parameter, is remapped to 5-km resolution, by using only the center 1-km pixel in the 5x5 pixel retrieval array. The remaining two (band number and static pressure levels) are stored as Vdata(table arrays) Each file is roughly 8 MB in size, and the total data volume is approximately 2 GB/day. MOD07_L2 Data Group and Parameters: Spatial & Temporal Resolution: Latitude & LongitudeScan start time Solar and Sensor Viewing Geometry: Solar zenith & Solar azimuth angleSensor zenith & Sensor azimuth angle Static Algorithm Parameters: MODIS band number; Pressure levels Atmospheric & Surface Pressure: Retrieved Geopotential Height ProfileTropopause HeightSurface Elevation, Surface Pressure Atmospheric & Surface Temperature:Guess & Retrieved Temperature ProfilesBrightness Temperature and Skin Temperature Atmospheric Moisture: Guess Mixing ratio ProfileRetrieved Dew Point Temperature Profile Atmospheric Stability Indices: Total Totals, Lifted Index, and K-index Atmospheric Trace Gases: Total Ozone BurdenTotal Column Precipitable Water Vapor - IR RetrievalTotal Column Precipitable Water Vapor - Direct IR RetrievalWater Vapor(Low & High)Retrieved Water Vapour Mixing Ratio Profile Quality Assurance & Statistical Parameters:Quality Assurance Parameters Run time QA flags MODIS Cloud Mask Processing Flag These parameters are very essential in the characterization of the atmosphere, atmospheric correction of remotely sensed surface parameters, and prediction of convective clouds and thunderstorms. For more information about the MOD07_L2 product, visit the MODIS-Atmosphere site at: https://modis-atmos.gsfc.nasa.gov/products/atm-profile
- API
Metrics for Evaluating Performance of Prognostic Techniques
data.nasa.gov | Last Updated 2020-01-29T03:23:28.000ZPrognostics is an emerging concept in condition basedmaintenance(CBM)ofcriticalsystems.Alongwith developing the fundamentals of being able to confidently predict Remaining Useful Life (RUL), the technology calls for fielded applications as it inches towards maturation. This requires a stringent performance evaluation so that the significance of the concept can be fully exploited. Currently, prognostics concepts lack standard definitions and suffer from ambiguous and inconsistent interpretations. This lack of standards is in part due to the varied end-user requirements for different applications, time scales, available information, domain dynamics, etc. to name a few issues. Instead, the research community has used a variety of metrics based largely on convenience with respect to their respective requirements. Very little attention has been focused on establishing a common ground to compare different efforts. This paper surveys the metrics that are already used for prognostics in a variety of domains including medicine, nuclear, automotive, aerospace, and electronics. It also considers other domains that involve prediction-related tasks, such as weather and finance. Differences and similarities between these domains and health maintenancehave been analyzed to help understand what performance evaluation methods may or may not be borrowed. Further, these metrics have been categorized in several ways that may be useful in deciding upon a suitable subset for a specific application. Some important prognostic concepts have been defined using a notational framework that enables interpretation of different metrics coherently. Last, but not the least, a list of metrics has been suggested to assess critical aspects of RUL predictions before they are fielded in real applications.