- API
SBUV2/NOAA-16 Ozone (O3) Profile and Total Column Ozone 1 Month Zonal Mean L3 Global 5.0 degree Latitude Zones V1 (SBUV2N16L3zm) at GES DISC
data.nasa.gov | Last Updated 2022-01-17T05:51:01.000ZThe Solar Backscattered Ultraviolet (SBUV) from NOAA-16 Level-3 monthly zonal mean (MZM) product (SBUV2N16L3zm) is derived from the Level-2 retrieved ozone profiles. Ozone retrievals are generated from the v8.6 SBUV algorithm. A Level-3 MZM file computes zonal means covering 5 degree latitude bands for each calendar month. For this product there are 154 months of data from October 2000 through July 2013. There are a total of 36 latitudinal bands, 18 in each hemisphere. Profile data are provided at 21 layers from 1013.25, 639.318, 403.382,254.517, 160.589, 101.325,63.9317, 40.3382, 25.4517, 16.0589, 10.1325, 6.39317,4.03382, 2.54517, 1.60589, 1.01325,0.639317, 0.403382, 0.254517, 0.160589 and 0.101325 hPa (measured at bottom of layer). NOTE: Some profiles have 20 layers and do not report the top most layer. Mixing ratios are reported at 15 layers from 0.5, 0.7, 1.0, 1.5, 2.0, 3.0, 4.0, 5.0, 7.0, 10.0, 15.0, 20.0, 30.0, 40.0 and 50.0 hPa (measured at middle of layer). The MZM product averages retrievals that meet the criteria for a good retrieval as determined by error flags in the Level 2 data. A good retrieval is defined as satisfying the following conditions: 1) Profile Error Flag = 0 or 1 (0 = good retrieval; 1 = solar zenith angle > 84 degrees). 2) Total Error Flags = 0, 1, 2 or 5 (0 = good retrieval; 1 = not used; 2 = solar zenith angle > 84 degrees; large discrepancy between profile total and best total ozone). NOTE - Total error flag = 5 is anomalously applied at high latitudes and high solar zenith angles where the B-Pair total ozone estimate is not as reliable as the ozone profile under these conditions. This error flag may be removed in future version of algorithm. The zonal means computed for each month are screened according to the following statistical criteria: 1) Number of good retrievals for the month greater than or equal to 2/3 of the samples for a nominal month. 2) Mean latitude of good retrievals less than or equal to 1 degree from center of latitude band. 3) Mean time of good retrievals less than or equal to 4 days from center of month (i.e., day = 15).
- API
West Africa Coastal Vulnerability Mapping: GPW Version 4 Population Growth, Preliminary Release 1, 2000-2010
data.nasa.gov | Last Updated 2022-01-17T06:03:26.000ZThe West Africa Coastal Vulnerability Mapping: GPW Version 4 Population Growth, Preliminary Release 1, 2000-2010, represents positive or negative growth in the number of persons per grid cell, and was calculated by subtracting an unreleased working version of the Gridded Population of the World (GPW), Version 4, year 2000 population count raster for the West Africa region from an unreleased working version of the GPWv4 year 2010 population count raster and cropping the result to within 200 kilometers of the coast. GPW provides globally consistent and spatially explicit human population information and data for use in research, policy making, and communications. This is a gridded (raster) data product that renders global population data at the scale and extent needed to demonstrate the spatial relationship of human populations and the environment globally. The gridded data set is constructed from national or subnational input Units (usually administrative Units) of varying resolutions. The native grid cell resolution of GPWv4 is 30 arc-second, or ~1 km at the equator.
- API
TRMM Microwave Imager Hydrometeor Profile L2 1.5 hours V7 (TRMM_2A12) at GES DISC
data.nasa.gov | Last Updated 2022-01-17T05:59:55.000ZThe new version of these data is in GPM-like format and can be found under the name GPM_2AGPROFTRMMTMI_CLIM. This dataset, 2A12, ”TMI Profiling”, generates surface rainfall and vertical hydrometeor profiles on a pixel by pixel basis from the TRMM Microwave Imager (TMI) brightness temperature data using the Goddard Profiling algorithm GPROF2010. Because the vertical information comes from a radiometer, it is not written out in independent vertical layers like the TRMM Precipitation Radar. Instead, the output is referenced to one of 100 typical structures for each hydrometeor or heating profile. These vertical structures are referenced as clusters in the output structure. Vertical hydrometeor profiles can be reconstructed to 28 layers by knowing the cluster number (i.e. shape) of the profile and a scale factor that is written for each pixel. This product contains hydrometeor profiles of cloud liquid water, precipitation water, cloud ice water, precipitation ice, rainfall type, and latent heating in 28 atmospheric layers. Changes in horizontal resolution resulting from the TRMM boost that occurred on 24 August 2001: Pre-Boost (before 7 August 2001): Temporal Resolution: 91.5 min/orbit ~ 16 orbits/day; Swath Width: 760 km; Horizontal Resolution: 4.4 km Post-Boost (after 24 August 2001): Temporal Resolution: 92.5 min/orbit ~ 16 orbits/day; Swath Width: 878 km; Horizontal Resolution: 5.1 km
- API
Gridded Population of the World, Version 4 (GPWv4): Population Density, Revision 11
data.nasa.gov | Last Updated 2022-01-17T05:27:37.000ZThe Gridded Population of the World, Version 4 (GPWv4): Population Density, Revision 11 consists of estimates of human population density (number of persons per square kilometer) based on counts consistent with national censuses and population registers, for the years 2000, 2005, 2010, 2015, and 2020.�A proportional allocation gridding algorithm, utilizing approximately 13.5 million national and sub-national administrative Units, was used to assign population counts to 30 arc-second grid cells. The population density rasters were created by dividing the population count raster for a given target year by the land area raster. The data files were produced as global rasters at 30 arc-second (~1 km at the equator) resolution. To enable faster global processing, and in support of research commUnities, the 30 arc-second count data were aggregated to 2.5 arc-minute, 15 arc-minute, 30 arc-minute and 1 degree resolutions to produce density rasters at these resolutions.
- API
Gridded Population of the World, Version 4 (GPWv4): Population Density Adjusted to Match 2015 Revision UN WPP Country Totals, Revision 11
data.nasa.gov | Last Updated 2022-01-17T05:27:37.000ZThe Gridded Population of the World, Version 4 (GPWv4): Population Density Adjusted to Match 2015 Revision of UN WPP Country Totals, Revision 11 consists of estimates of human population density (number of persons per square kilometer) based on counts consistent with national censuses and population registers with respect to relative spatial distribution, but adjusted to match the 2015 Revision of the United Nation's World Population Prospects (UN WPP) country totals, for the years 2000, 2005, 2011, 2015, and 2020. A proportional allocation gridding algorithm, utilizing approximately 13.5 million national and sub-national administrative Units, was used to assign UN WPP-adjusted population counts to 30 arc-second grid cells. The density rasters were created by dividing the UN WPP-adjusted population count raster for a given target year by the land area raster. The data files were produced as global rasters at 30 arc-second (~1 km at the equator) resolution. To enable faster global processing, and in support of research commUnities, the 30 arc-second adjusted count data were aggregated to 2.5 arc-minute, 15 arc-minute, 30 arc-minute and 1 degree resolutions to produce density rasters at these resolutions.
- API
SBUV2/NOAA-17 Ozone (O3) Profile and Total Column Ozone 1 Month Zonal Mean L3 Global 5.0 degree Latitude Zones V1 (SBUV2N17L3zm) at GES DISC
data.nasa.gov | Last Updated 2022-01-17T05:51:02.000ZThe Solar Backscattered Ultraviolet (SBUV) from NOAA-17 Level-3 monthly zonal mean (MZM) product (SBUV2N17L3zm) is derived from the Level-2 retrieved ozone profiles. Ozone retrievals are generated from the v8.6 SBUV algorithm. A Level-3 MZM file computes zonal means covering 5 degree latitude bands for each calendar month. For this product there are 126 months of data from August 2002 through January 2013. There are a total of 36 latitudinal bands, 18 in each hemisphere. Profile data are provided at 21 layers from 1013.25, 639.318, 403.382,254.517, 160.589, 101.325,63.9317, 40.3382, 25.4517, 16.0589, 10.1325, 6.39317,4.03382, 2.54517, 1.60589, 1.01325,0.639317, 0.403382, 0.254517, 0.160589 and 0.101325 hPa (measured at bottom of layer). NOTE: Some profiles have 20 layers and do not report the top most layer. Mixing ratios are reported at 15 layers from 0.5, 0.7, 1.0, 1.5, 2.0, 3.0, 4.0, 5.0, 7.0, 10.0, 15.0, 20.0, 30.0, 40.0 and 50.0 hPa (measured at middle of layer). The MZM product averages retrievals that meet the criteria for a good retrieval as determined by error flags in the Level 2 data. A good retrieval is defined as satisfying the following conditions: 1) Profile Error Flag = 0 or 1 (0 = good retrieval; 1 = solar zenith angle > 84 degrees). 2) Total Error Flags = 0, 1, 2 or 5 (0 = good retrieval; 1 = not used; 2 = solar zenith angle > 84 degrees; large discrepancy between profile total and best total ozone). NOTE - Total error flag = 5 is anomalously applied at high latitudes and high solar zenith angles where the B-Pair total ozone estimate is not as reliable as the ozone profile under these conditions. This error flag may be removed in future version of algorithm. The zonal means computed for each month are screened according to the following statistical criteria: 1) Number of good retrievals for the month greater than or equal to 2/3 of the samples for a nominal month. 2) Mean latitude of good retrievals less than or equal to 1 degree from center of latitude band. 3) Mean time of good retrievals less than or equal to 4 days from center of month (i.e., day = 15).
- API
MODIS/Terra Temperature and Water Vapor Profiles 5-Min L2 Swath 5km - NRT
data.nasa.gov | Last Updated 2023-07-24T13:06:00.000ZThe level-2 MODIS Temperature and Water Vapor Profile Product MOD07_L2 consists of 30 gridded parameters related to atmospheric stability, atmospheric temperature and moisture profiles, total atmospheric water vapor, and total ozone. All of these parameters are produced for both daytime and nighttime conditions at 5-km pixel resolution when at least 9 FOVs are cloud free. The atmospheric profiles are produced at 20 vertical atmospheric levels (5., 10., 20., 30., 50., 70., 100., 150., 200., 250., 300., 400., 500., 620., 700., 780., 850., 920., 950., 1000. mbar) The water vapor parameter is an estimate of the total tropospheric column water vapor made from integrated MODIS infrared retrievals of atmospheric moisture profiles in clear scenes. The thermal band 9.6 micron is used for retrieving total ozone burden. The shortname for this Level-2 MODIS atmospheric profile product is MOD07_L2 and the principal investigator for this product is MODIS scientist Dr. Paul Menzel ( paulm@ssec.wisc.edu).The MODIS atmospheric profile (MOD07_L2) product contains data that has a spatial resolution (pixel size) of 5 x 5 kilometers (at nadir). Each MOD07_L2 product file covers a five-minute time interval, which means the MOD07_L2 output grid is 270 5-km pixels in width and 406 5-km pixels in length for nine consecutive granules. Every tenth granule has an output grid size of 270 by 408 pixels. MOD07_L2 product files are stored in Hierarchical Data Format(HDF-EOS). Twenty eight of the 30 gridded cloud parameters(5-kilometer pixel resolution) are stored as Scientific Data Sets (SDS) within the file, the remaining two algorithmic static parameters (band number and presure level) are stored as Vdata(table arrays). Cloud Mask SDS, derived from the 1-km MOD35_L2 Cloud Mask parameter, is remapped to 5-km resolution, by using only the center 1-km pixel in the 5x5 pixel retrieval array. The remaining two (band number and static pressure levels) are stored as Vdata(table arrays) Each file is roughly 8 MB in size, and the total data volume is approximately 2 GB/day. MOD07_L2 Data Group and Parameters: Spatial & Temporal Resolution: Latitude & LongitudeScan start time Solar and Sensor Viewing Geometry: Solar zenith & Solar azimuth angleSensor zenith & Sensor azimuth angle Static Algorithm Parameters: MODIS band number; Pressure levels Atmospheric & Surface Pressure: Retrieved Geopotential Height ProfileTropopause HeightSurface Elevation, Surface Pressure Atmospheric & Surface Temperature:Guess & Retrieved Temperature ProfilesBrightness Temperature and Skin Temperature Atmospheric Moisture: Guess Mixing ratio ProfileRetrieved Dew Point Temperature Profile Atmospheric Stability Indices: Total Totals, Lifted Index, and K-index Atmospheric Trace Gases: Total Ozone BurdenTotal Column Precipitable Water Vapor - IR RetrievalTotal Column Precipitable Water Vapor - Direct IR RetrievalWater Vapor(Low & High)Retrieved Water Vapour Mixing Ratio Profile Quality Assurance & Statistical Parameters:Quality Assurance Parameters Run time QA flags MODIS Cloud Mask Processing Flag These parameters are very essential in the characterization of the atmosphere, atmospheric correction of remotely sensed surface parameters, and prediction of convective clouds and thunderstorms. For more information about the MOD07_L2 product, visit the MODIS-Atmosphere site at: https://modis-atmos.gsfc.nasa.gov/products/atm-profile
- API
TES/Aura L2 Ozone Nadir Special Observation V008
data.nasa.gov | Last Updated 2022-01-17T05:58:32.000ZTL2O3NS_8 is the Tropospheric Emission Spectrometer (TES)/Aura Level 2 Ozone Nadir Special Observation Version 8 data product. TES was an instrument aboard NASA's Aura satellite and was launched from California on July 15, 2004. Data collection for TES is complete. It consisted of information for one molecular species for an entire Global Survey or Special Observation. TES Level 2 data contained retrieved species (or temperature) profiles at the observation targets and the estimated errors. The geolocation, quality and other data (e.g., surface characteristics for nadir observations) were also provided. L2 modeled spectra were evaluated using radiative transfer modeling algorithms. The process, referred to as retrieval, compared observed spectra to the modeled spectra and iteratively updated the atmospheric parameters. L2 standard product files included information for one molecular species (or temperature) for an entire global survey or special observation run. A global survey consisted of a maximum of 16 consecutive orbits. Nadir and limb observations were in separate L2 files, and a single ancillary file was composed of data that are common to both nadir and limb files. A nadir sequence within the TES Global Survey was a fixed number of observations within an orbit for a Global Survey. Prior to April 24, 2005, it consisted of two low resolution scans over the same ground locations. After April 24, 2005, Global Survey data consisted of three low resolution scans. The Nadir standard product consists of four files, where each file is composed of the Global Survey Nadir observations from one of four focal planes for a single orbit, i.e. 72 orbit sequences. The Global Survey Nadir observations only used a single set of filter mix. A Global Survey consists of observations along 16 consecutive orbits at the start of a two day cycle, over which 3,200 retrievals were performed. Each observation was the input for retrievals of species volume mixing ratios (VMRs), temperature profiles, surface temperature and other data parameters with associated pressure levels, precision, total error, vertical resolution, total column density and other diagnostic quantities. Each TES Level 2 standard product reported information in a swath format conforming to the HDF-EOS Aura File Format Guidelines. Each Swath object wa bounded by the number of observations in a global survey and a predefined set of pressure levels representing slices through the atmosphere. Each standard product could have had a variable number of observations depending upon the Global Survey configuration and whether averaging is employed. Also, missing or bad retrievals were not reported. The organization of data within the Swath object was based on a superset of the Upper Atmosphere Research Satellite (UARS) pressure levels that was used to report concentrations of trace atmospheric gases. The reporting grid was the same pressure grid used for modeling. There were 67 reporting levels from 1211.53 hPa, which allowed for very high surface pressure conditions, to 0.1 hPa, about 65 km. In addition, the products reported values directly at the surface when possible or at the observed cloud top level. Thus in the Standard Product files each observation could potentially contain estimates for the concentration of a particular molecule at 67 different pressure levels within the atmosphere. However, for most retrieved profiles, the highest pressure levels were not observed due to a surface at lower pressure or cloud obscuration. For pressure levels corresponding to altitudes below the cloud top or surface, where measurements were not possible, a fill value was applied. To minimize the duplication of information between the individual species standard products, data fields common to each species (such as spacecraft coordinates, emissivity, and other data fields) have been collected into a separate standard product, termed the TES L2 Ancillary Data product (ESDT short name: TL2ANC).
- API
Georeferenced Population Datasets of Mexico (GEO-MEX): Raster Based GIS Coverage of Mexican Population
data.nasa.gov | Last Updated 2022-01-17T05:19:59.000ZThe Raster Based GIS Coverage of Mexican Population is a gridded coverage (1 x 1 km) of Mexican population. The data were converted from vector into raster. The population figures were derived based on available point data (the population of known localities - 30,000 in all). Cell values were derived using a weighted moving average function (Burrough, 1986), and then calculated based on known population by state. The result from this conversion is a coverage whose population data is based on square grid cells rather than a series of vectors. This data set is produced by the Columbia University Center for International Earth Science Information Network (CIESIN) in collaboration with the Instituto Nacional de Estadistica Geografia e Informatica (INEGI).
- API
TES/Aura L2 Carbonyl Sulfide Nadir Special Observation V008
data.nasa.gov | Last Updated 2022-01-17T05:58:11.000ZTL2OCSNS_8 is the Tropospheric Emission Spectrometer (TES)/Aura Level 2 Atmospheric Temperatures Limb Version 8 data product. TES was an instrument aboard NASA's Aura satellite and was launched from California on July 15, 2004. Data collection for TES is complete. It consisted of information for one molecular species for an entire Global Survey or Special Observation. TES Level 2 data contained retrieved species (or temperature) profiles at the observation targets and the estimated errors. The geolocation, quality and other data (e.g., surface characteristics for nadir observations) were also provided. L2 modeled spectra were evaluated using radiative transfer modeling algorithms. The process, referred to as retrieval, compared observed spectra to the modeled spectra and iteratively updated the atmospheric parameters. L2 standard product files included information for one molecular species (or temperature) for an entire global survey or special observation run. A global survey consisted of a maximum of 16 consecutive orbits. Nadir and limb observations were in separate L2 files, and a single ancillary file was composed of data that are common to both nadir and limb files. A nadir sequence within the TES Global Survey was a fixed number of observations within an orbit for a Global Survey. Prior to April 24, 2005, it consisted of two low resolution scans over the same ground locations. After April 24, 2005, Global Survey data consisted of three low resolution scans. The Nadir standard product consists of four files, where each file is composed of the Global Survey Nadir observations from one of four focal planes for a single orbit, i.e. 72 orbit sequences. The Global Survey Nadir observations only used a single set of filter mix. A Global Survey consists of observations along 16 consecutive orbits at the start of a two day cycle, over which 3,200 retrievals were performed. Each observation was the input for retrievals of species volume mixing ratios (VMRs), temperature profiles, surface temperature and other data parameters with associated pressure levels, precision, total error, vertical resolution, total column density and other diagnostic quantities. Each TES Level 2 standard product reported information in a swath format conforming to the HDF-EOS Aura File Format Guidelines. Each Swath object wa bounded by the number of observations in a global survey and a predefined set of pressure levels representing slices through the atmosphere. Each standard product could have had a variable number of observations depending upon the Global Survey configuration and whether averaging is employed. Also, missing or bad retrievals were not reported. The organization of data within the Swath object was based on a superset of the Upper Atmosphere Research Satellite (UARS) pressure levels that was used to report concentrations of trace atmospheric gases. The reporting grid was the same pressure grid used for modeling. There were 67 reporting levels from 1211.53 hPa, which allowed for very high surface pressure conditions, to 0.1 hPa, about 65 km. In addition, the products reported values directly at the surface when possible or at the observed cloud top level. Thus in the Standard Product files each observation could potentially contain estimates for the concentration of a particular molecule at 67 different pressure levels within the atmosphere. However, for most retrieved profiles, the highest pressure levels were not observed due to a surface at lower pressure or cloud obscuration. For pressure levels corresponding to altitudes below the cloud top or surface, where measurements were not possible, a fill value was applied. To minimize the duplication of information between the individual species standard products, data fields common to each species (such as spacecraft coordinates, emissivity, and other data fields) have been collected into a separate standard product, termed the TES L2 Ancillary Data product (ESDT short name: TL2ANC). U