- API
SBUV2/NOAA-11 Ozone (O3) Profile and Total Column Ozone Monthly L3 Global 5.0deg Lat Zones V1
nasa-test-0.demo.socrata.com | Last Updated 2015-07-20T04:54:41.000ZThe Solar Backscattered Ultra Violet (SBUV) from NOAA-11 Level-3 monthly zonal mean (MZM) product (SBUV2N11L3zm) is derived from the Level-2 retrieved ozone profiles. Ozone retrievals are generated from the v8.6 SBUV algorithm. A Level-3 MZM file computes zonal means covering 5 degree latitude bands for each calendar month. For this product there are 147 months of data from January 1989 through March 2001. There are a total of 36 latitudinal bands, 18 in each hemisphere. Profile data are provided at 21 layers from 1013.25, 639.318, 403.382,254.517, 160.589, 101.325,63.9317, 40.3382, 25.4517, 16.0589, 10.1325, 6.39317,4.03382, 2.54517, 1.60589, 1.01325,0.639317, 0.403382, 0.254517, 0.160589 and 0.101325 hPa (measured at bottom of layer). NOTE: Some profiles have 20 layers and do not report the top most layer. Mixing ratios are reported at 15 layers from 0.5, 0.7, 1.0, 1.5, 2.0, 3.0, 4.0, 5.0, 7.0, 10.0, 15.0, 20.0, 30.0, 40.0 and 50.0 hPa (measured at middle of layer). The MZM product averages retrievals that meet the criteria for a good retrieval as determined by error flags in the Level 2 data. A good retrieval is defined as satisfying the following conditions: 1) Profile Error Flag = 0 or 1 (0 = good retrieval; 1 = solar zenith angle > 84 deg.) 2) Total Error Flags = 0, 1, 2 or 5 (0 = good retrieval; 1 = not used; 2 = solar zenith angle > 84 deg; large discrepancy between profile total and best total ozone) NOTE - Total error flag = 5 is anomalously applied at high latitudes and high solar zenith angle where B-Pair total ozone estimate is not as reliable as profile under these conditions. This error flag may be removed in future version of algorithm. The zonal means computed for each month are screened according to the following statistical criteria: 1) number of good retrievals for the month greater than or equal to 2/3 of the samples for a nominal month. 2) mean latitude of good retrievals less than or equal to 1 degree from center of latitude band. 3) mean time of good retrievals less than or equal to 4 days from center of month (i.e., day = 15)
- API
Population Exposure Estimates in Proximity to Nuclear Power Plants, Country-Level Aggregates
nasa-test-0.demo.socrata.com | Last Updated 2015-07-20T04:36:37.000ZThe Population Exposure Estimates in Proximity to Nuclear Power Plants, Country-Level Aggregates data set consists of country-level estimates of total, urban, and rural populations and land area, country-wide, that are in proximity to a nuclear power plant. This data set was created using a global data set of point locations of nuclear power plants, with buffer zones at 30km, 75km, 150km, 300km, 600km, and 1200km, and the Global Population Count Grid Time Series Estimates, Version 1 to estimate the population within each buffer zone for the years 1990, 2000, and 2010. Global Rural-Urban Mapping Project, Version 1 (GRUMPv1) Land and Geographic Unit Area Grids were used to estimate land area within each buffer zone. The GRUMPv1 Urban Extents Grid was used to further delineate population and land area estimates within urban and rural areas. All grids used for population, land area, and urban mask were of 1 km (30 arc-second) resolution.
- API
BUV/Nimbus-04 Ozone (O3) Profile and Total Column Ozone Monthly L3 Global 5.0deg Lat Zones V1
nasa-test-0.demo.socrata.com | Last Updated 2015-07-20T05:06:00.000ZThe Solar Backscattered Ultra Violet (SBUV) from Nimbus-4 Level-3 monthly zonal mean (MZM) product (BUVN04L3zm) is derived from the Level-2 retrieved ozone profiles. Ozone retrievals are generated from the v8.6 SBUV algorithm. A Level-3 MZM file computes zonal means covering 5 degree latitude bands for each calendar month. For this product there are 72 months of data from May 1970 through April 1976. There are a total of 36 latitudinal bands, 18 in each hemisphere. Profile data are provided at 21 layers from 1013.25, 639.318, 403.382,254.517, 160.589, 101.325,63.9317, 40.3382, 25.4517, 16.0589, 10.1325, 6.39317,4.03382, 2.54517, 1.60589, 1.01325,0.639317, 0.403382, 0.254517, 0.160589 and 0.101325 hPa (measured at bottom of layer). NOTE: Some profiles have 20 layers and do not report the top most layer. Mixing ratios are reported at 15 layers from 0.5, 0.7, 1.0, 1.5, 2.0, 3.0, 4.0, 5.0, 7.0, 10.0, 15.0, 20.0, 30.0, 40.0 and 50.0 hPa (measured at middle of layer). The MZM product averages retrievals that meet the criteria for a good retrieval as determined by error flags in the Level 2 data. A good retrieval is defined as satisfying the following conditions: 1) Profile Error Flag = 0 or 1 (0 = good retrieval; 1 = solar zenith angle > 84 deg.) 2) Total Error Flags = 0, 1, 2 or 5 (0 = good retrieval; 1 = not used; 2 = solar zenith angle > 84 deg; large discrepancy between profile total and best total ozone) NOTE - Total error flag = 5 is anomalously applied at high latitudes and high solar zenith angle where B-Pair total ozone estimate is not as reliable as profile under these conditions. This error flag may be removed in future version of algorithm. The zonal means computed for each month are screened according to the following statistical criteria: 1) number of good retrievals for the month greater than or equal to 2/3 of the samples for a nominal month. 2) mean latitude of good retrievals less than or equal to 1 degree from center of latitude band. 3) mean time of good retrievals less than or equal to 4 days from center of month (i.e., day = 15)
- API
Pyramid Comet Sampler Project
nasa-test-0.demo.socrata.com | Last Updated 2015-07-20T05:34:48.000ZBased on the sampling requirements, we propose an Inverted Pyramid sampling system. Each face of the pyramid includes a cutting blade which is independently actuated by redundant pyrotechnic actuators. Such sampler shape has a number of advantages. The pyramidal V shape acts as an arrow piercing into the comet surface at a steep angle. The 4 opposing blades offset tangential forces, meaning that only vertical forces would need to be reacted during impact. These forces could be minimized by making the pyramid height low (and in turn the pyramid would be more flat). In the latest Decadal Survey, the committee recommended selecting a Comet Surface Sample Return mission as one of the five New Frontiers 4 (NF4) missions, solidifying the importance of studying returned physical samples from a comet. Lunar South Pole-Aitken Basin Sample Return could also benefit from the development of this sampling approach.
- API
TRMM Precipitation Radar (PR) Level 2 Rainfall Rate and Profile Product (TRMM Product 2A25) V7
nasa-test-0.demo.socrata.com | Last Updated 2015-07-19T08:53:20.000ZThe TRMM Precipitation Radar (PR), the first of its kind in space, is an electronically scanning radar, operating at 13.8 GHz that measures the 3-D rainfall distribution over both land and ocean, and defines the layer depth of the precipitation. The objectives of 2A25 is to correct for the rain attenuation in measured radar reflectivity and to estimate the instantaneous three-dimensional distribution of rain from the TRMM Precipitation Radar (PR) data. The estimates of attenuation-corrected radar reflectivity factor and rainfall rate are given at each resolution cell of the PR. The estimated near-surface rainfall rate and average rainfall rate between the two pre-defined altitudes (2 and 4 km) are also calculated for each beam position. 2A25 basically uses a hybrid of the Hitschfeld-Bordan method and the surface reference method to estimate the vertical true radar reflectivity (Z) profile. (The hybrid method is described in Iguchi and Meneghini (1994)). The vertical rain profile is then calculated from the estimated true Z profile by using an appropriate Z-R relationship. The attenuation correction is, in principle, based on the surface reference method. This method assumes that the decrease in the apparent surface cross section (delta sigma-zero) is caused by the propagation loss in rain. The coefficient a in the k-Z relationship, k=a Z**b, is adjusted in such a way that the path-integrated attenuation (PIA) estimated from the measured Zm-profile will match the delta sigma-zero. The attenuation correction of Z is carried out by the Hitschfeld-Bordan method with the modified a. Since a is adjusted, this type of surface reference method is called the a-adjustment method. The a-adjustment method assumes that the discrepancy between the PIA estimate from delta sigma-zero and that from the measured Zm-profile can be attributed to the inappropriate choice of a values, which may vary depending on the raindrop size distribution and other conditions. It assumes that the radar is properly calibrated and that the measured Zm has no error. In order to avoid inaccuracies in the attenuation correction when rain is weak, a hybrid of the surface reference method and the Hitschfeld-Bordan method is used (Iguchi and Meneghini, 1994). The PIA is first estimated from the precipitation echo alone. The weight given by the hybrid method to the PIA estimate from the surface reference increases as the attenuation estimate increases. When rain is very weak and the attenuation estimate is small, the PIA estimate from the surface reference is effectively neglected. With the introduction of the hybrid method, the divergence associated with the Hitschfeld-Bordan method is also prevented. One major difference from the method described in the above reference is that, in order to deal with the beam-filling problem, a non-uniformity parameter is introduced and is used to correct the bias in the surface reference arising from the horizontal non-uniformity of rain field within the beam. Since radar echoes from near the surface are contaminated by the mainlobe clutter, the rain estimate at the lowest point in the clutter-free region is given as the near-surface rainfall rate for each angle bin. Spatial coverage is between 38 degrees North and 38 degrees South, owing to the 35 degree inclination of the TRMM satellite. This orbit provides extensive coverage in the tropics and allows each location to be covered at a different local time each day, enabling the analysis of the diurnal cycle of precipitation. There are, in general, 9150 scans along the orbit, with each scan consisting of 49 rays. The scan width is about 220 km. The data are stored in the Hierarchical Data Format (HDF), which includes both core and product specific metadata applicable to the PR measurements. A fi...
- API
Gridded Population of the World, Version 2 (GPWv2)
nasa-test-0.demo.socrata.com | Last Updated 2015-07-19T08:03:40.000ZGridded Population of the World, Version 2 (GPWv2) consists of estimates of human population for the years 1995 and 1990 by 2.5 arc-minute grid cells. The data products are population counts (raw counts), population densities (per square km), and land area (actual area net of ice and water), all of which are available in two GIS-compatible data formats at the global, continent (Antarctica not included), and country levels. A proportional allocation gridding algorithm, utilizing 127,105 national and sub-national administrative units, is used to assign population values to grid cells. Advantages to GPWv2 include higher quality data from the U.S., Africa, Australia, Canada, Europe, Russia, New Zealand, and India; 8 times the number of administrative units; national population estimates that have been adjusted to match the United Nations national estimated population for each country; a proportional allocation algorithm that reduces error with multiple input polygons; and higher spatial resolution. GPWv2 is produced by the Columbia University Center for International Earth Science Information Network (CIESIN) in collaboration with the International Food Policy Research Institute (IFPRI) and the World Resources Institute (WRI). (Suggested Usage: To serve a wide user community by providing the latest data on human population distribution that can be used in interdisciplinary studies of the environment.)
- API
BUV/Nimbus-04 Ozone (O3) Profile and Total Column Ozone Monthly L3 Global 5.0deg Lat Zones V1
nasa-test-0.demo.socrata.com | Last Updated 2015-07-20T05:06:01.000ZThe Solar Backscattered Ultra Violet (SBUV) from Nimbus-4 Level-3 monthly zonal mean (MZM) product (BUVN04L3zm) is derived from the Level-2 retrieved ozone profiles. Ozone retrievals are generated from the v8.6 SBUV algorithm. A Level-3 MZM file computes zonal means covering 5 degree latitude bands for each calendar month. For this product there are 72 months of data from May 1970 through April 1976. There are a total of 36 latitudinal bands, 18 in each hemisphere. Profile data are provided at 21 layers from 1013.25, 639.318, 403.382,254.517, 160.589, 101.325,63.9317, 40.3382, 25.4517, 16.0589, 10.1325, 6.39317,4.03382, 2.54517, 1.60589, 1.01325,0.639317, 0.403382, 0.254517, 0.160589 and 0.101325 hPa (measured at bottom of layer). NOTE: Some profiles have 20 layers and do not report the top most layer. Mixing ratios are reported at 15 layers from 0.5, 0.7, 1.0, 1.5, 2.0, 3.0, 4.0, 5.0, 7.0, 10.0, 15.0, 20.0, 30.0, 40.0 and 50.0 hPa (measured at middle of layer). The MZM product averages retrievals that meet the criteria for a good retrieval as determined by error flags in the Level 2 data. A good retrieval is defined as satisfying the following conditions: 1) Profile Error Flag = 0 or 1 (0 = good retrieval; 1 = solar zenith angle > 84 deg.) 2) Total Error Flags = 0, 1, 2 or 5 (0 = good retrieval; 1 = not used; 2 = solar zenith angle > 84 deg; large discrepancy between profile total and best total ozone) NOTE - Total error flag = 5 is anomalously applied at high latitudes and high solar zenith angle where B-Pair total ozone estimate is not as reliable as profile under these conditions. This error flag may be removed in future version of algorithm. The zonal means computed for each month are screened according to the following statistical criteria: 1) number of good retrievals for the month greater than or equal to 2/3 of the samples for a nominal month. 2) mean latitude of good retrievals less than or equal to 1 degree from center of latitude band. 3) mean time of good retrievals less than or equal to 4 days from center of month (i.e., day = 15)
- API
OMI/Aura Ozone (O3) Profile 1-Orbit L2 Swath 13x48km V003
nasa-test-0.demo.socrata.com | Last Updated 2015-07-20T04:53:30.000ZThe OMI/Aura Level-2 Ozone Profile data product OMO3PR (Version 003) is now available ( http://disc.gsfc.nasa.gov/Aura/OMI/omo3pr_v003.shtml ) from the NASA Goddard Earth Sciences Data and Information Services Center (GES DISC) for the public access. OMI Level-2 ozone profile product, OMO3PR at the pixel resolution 13x 48 km (at nadir), is based on the optimal estimation algorithm (Rodgers, 2000) with climatological ozone profiles as a-priori information. The OMO3PR retrieval algorithm uses spectral radiance values from the UV1 channel (270 nm to 308.5 nm) and from the first part of the UV2 channel (311.5 nm to 33 0 nm). OMO3PR product provides ozone values (in Dobson unit) for 18 atmospheric layers. It also provides a-priori ozone profile values, error covariance matrix, averaging kernel and some ancillary information such as time, latitude, longitude, solar zenith and viewing zenith angles and quality flags . (The short name for this Level-2 OMI ozone profile product is OMO3PR) The lead scientist for this product is Dr. Johan de Haan (johan.de.haan@knmi.nl). OMO3PR product files are stored in Hierarchical Data Format (HDF-EOS5 ). Each file contains data from the day lit portion of an orbit (approx 53 minutes). There are approximately 14 orbits per day thus the total data volume is approximately 150 GB/day. A list of tools for browsing and extracting data from these files can be found at: http://disc.gsfc.nasa.gov/Aura/tools.shtml A 'Readme' document containing brief algorithm description and known data quality related issues and file spec are provided by the OMO3PR algorithm lead (see http://disc.gsfc.nasa.gov/Aura/OMI/omo3pr_v003.shtml ).
- API
TRMM Precipitation Radar (PR) Level 2 Rainfall Rate and Profile Product (TRMM Product 2A25) V7
nasa-test-0.demo.socrata.com | Last Updated 2015-07-20T04:52:32.000ZThe TRMM Precipitation Radar (PR), the first of its kind in space, is an electronically scanning radar, operating at 13.8 GHz that measures the 3-D rainfall distribution over both land and ocean, and defines the layer depth of the precipitation. The objectives of 2A25 is to correct for the rain attenuation in measured radar reflectivity and to estimate the instantaneous three-dimensional distribution of rain from the TRMM Precipitation Radar (PR) data. The estimates of attenuation-corrected radar reflectivity factor and rainfall rate are given at each resolution cell of the PR. The estimated near-surface rainfall rate and average rainfall rate between the two pre-defined altitudes (2 and 4 km) are also calculated for each beam position. 2A25 basically uses a hybrid of the Hitschfeld-Bordan method and the surface reference method to estimate the vertical true radar reflectivity (Z) profile. (The hybrid method is described in Iguchi and Meneghini (1994)). The vertical rain profile is then calculated from the estimated true Z profile by using an appropriate Z-R relationship. The attenuation correction is, in principle, based on the surface reference method. This method assumes that the decrease in the apparent surface cross section (delta sigma-zero) is caused by the propagation loss in rain. The coefficient a in the k-Z relationship, k=a Z**b, is adjusted in such a way that the path-integrated attenuation (PIA) estimated from the measured Zm-profile will match the delta sigma-zero. The attenuation correction of Z is carried out by the Hitschfeld-Bordan method with the modified a. Since a is adjusted, this type of surface reference method is called the a-adjustment method. The a-adjustment method assumes that the discrepancy between the PIA estimate from delta sigma-zero and that from the measured Zm-profile can be attributed to the inappropriate choice of a values, which may vary depending on the raindrop size distribution and other conditions. It assumes that the radar is properly calibrated and that the measured Zm has no error. In order to avoid inaccuracies in the attenuation correction when rain is weak, a hybrid of the surface reference method and the Hitschfeld-Bordan method is used (Iguchi and Meneghini, 1994). The PIA is first estimated from the precipitation echo alone. The weight given by the hybrid method to the PIA estimate from the surface reference increases as the attenuation estimate increases. When rain is very weak and the attenuation estimate is small, the PIA estimate from the surface reference is effectively neglected. With the introduction of the hybrid method, the divergence associated with the Hitschfeld-Bordan method is also prevented. One major difference from the method described in the above reference is that, in order to deal with the beam-filling problem, a non-uniformity parameter is introduced and is used to correct the bias in the surface reference arising from the horizontal non-uniformity of rain field within the beam. Since radar echoes from near the surface are contaminated by the mainlobe clutter, the rain estimate at the lowest point in the clutter-free region is given as the near-surface rainfall rate for each angle bin. Spatial coverage is between 38 degrees North and 38 degrees South, owing to the 35 degree inclination of the TRMM satellite. This orbit provides extensive coverage in the tropics and allows each location to be covered at a different local time each day, enabling the analysis of the diurnal cycle of precipitation. There are, in general, 9150 scans along the orbit, with each scan consisting of 49 rays. The scan width is about 220 km. The data are stored in the Hierarchical Data Format (HDF), which includes both core and product specific metadata applicable to the PR measurements. A fi...
- API
Gridded Population of the World, Version 3 (GPWv3): Population Density Grid
nasa-test-0.demo.socrata.com | Last Updated 2015-07-20T04:36:45.000ZGridded Population of the World, Version 3 (GPWv3) consists of estimates of human population for the years 1990, 1995, and 2000 by 2.5 arc-minute grid cells and associated datasets dated circa 2000. A proportional allocation gridding algorithm, utilizing more than 300,000 national and sub-national administrative units, is used to assign population values to grid cells. The population density grids are derived by dividing the population count grids by the land area grid and represent persons per square kilometer. The grids are available in various GIS-compatible data formats and geographic extents (global, continent [Antarctica not included], and country levels). GPWv3 is produced by the Columbia University Center for International Earth Science Information Network (CIESIN) in collaboration with Centro Internacional de Agricultura Tropical (CIAT).