- API
NEW HORIZONS SDC JUPITER ENCOUNTER CALIBRATED V4.0
data.nasa.gov | Last Updated 2023-01-26T20:41:44.000ZThis data set contains Calibrated data taken by the New Horizons Student Dust Counter instrument during the Jupiter encounter mission phase. This is VERSION 4.0 of this data set. For the Jupiter encounter mission phase, SDC collected no science data during the Jupiter flyby, as the requisite spacecraft configuration prevented SDC from operating. There were some very sparse data taken from December, 2006 through April, 2007, and some of very short (or zero) duration after the Jupiter flyby from April, 2007 through June, 2007. The changes in Version 4.0 were re-running of the ancillary data in the data product, updated geometry from newer SPICE kernels, minor editing of the documentation, catalogs, etc., and resolution of liens from the December, 2014 review, plus those from the May, 2016 review of the Pluto Encounter data sets. No new observations were added with Version 4.0.
- API
NEW HORIZONS SDC PLUTO CRUISE RAW V2.0
data.nasa.gov | Last Updated 2023-01-26T20:54:05.000ZThis data set contains Raw data taken by the New Horizons Student Dust Counter instrument during the pluto cruise mission phase. This is VERSION 2.0 of this data set. SDC collected science data intermittently during the hibernation years following the Jupiter encounter, designated as the PLUTOCRUISE phase. There were also Annual Checkouts (ACOs), STIM calibrations, Noise calibrations, and an anomaly in November, 2007. SDC's main science data collection periods were during hibernation. During ACOs, science data are taken intermittently but the user must be careful in analyzing these data since there is usually more activity on the spacecraft during hibernation. STIM and Noise refer to scheduled calibrations and are done with a regular cadence of one per year after the Jupiter encounter; they occurred sporadically in the early years of the mission. Note that some SDC data files have the same stop and start time and a zero exposure time. The reason for this is that the start and stop time for SDC data files are the event times for the first and last events in the files, so for files that contain a single event, these two values are the same. The changes in Version 2.0 were re-running of the ancillary data in the data product, updated geometry from newer SPICE kernels, minor editing of the documentation, catalogs, etc., and resolution of liens from the December, 2014 review, plus those from the May, 2016 review of the Pluto Encounter data sets. New observations added with this version (V2.0) include ongoing cruise observations from August, 2014 through January, 2015.
- API
Experimental and Analytical Development of a Health Management System for Electro-Mechanical Actuators
data.nasa.gov | Last Updated 2020-01-29T01:49:29.000ZExpanded deployment of Electro-Mechanical Actuators (EMAs) in critical applications has created much interest in EMA Prognostic Health Management (PHM), a key enabling technology of Condition Based Maintenance (CBM). As such, Impact Technologies, LLC is collaborating with the NASA Ames Research Center to perform a number of research efforts in support of NASA’s Integrated Vehicle Health Management (IVHM) initiatives. These efforts have combined experimental test stand development, laboratory seeded fault testing, and physical model-based health monitoring in a comprehensive PHM system development strategy. This paper discusses two closely related EMA research programs being conducted by Impact and NASA Ames. The first of these efforts resulted in the creation of an electro-mechanical actuator test stand for the Prognostics Center of Excellence at the NASA Ames Research Center. The second effort is ongoing and is utilizing physics-based modeling techniques to develop an algorithm and software package toolset for PHM of aircraft EMA systems using a hybrid (virtual sensor) approach.
- API
NEW HORIZONS SDC PLUTO ENCOUNTER RAW V3.0
data.nasa.gov | Last Updated 2023-01-26T20:43:40.000ZThis data set contains Raw data taken by the New Horizons Student Dust Counter instrument during the Pluto encounter mission phase. This is VERSION 3.0 of this data set. This data set contains SDC observations taken during the the Approach (Jan-Jul, 2015), Encounter, Departure, and Transition mission sub-phases, including flyby observations taken on 14 July, 2015, and departure and calibration data through late October, 2016. This data set completes the Pluto mission phase deliveries for SDC. This is version 3.0 of this data set. Changes since version 2.0 include the final batch of Pluto mission phase data, downlinked between the end of January, 2016 and late in October, 2016, including a Stim calibration in July. Also, updates were made to the documentation and catalog files, primarily to implement suggestions from the V2.0 peer review. A new table of SDC Ram (velocity) ancillary data has been provided, and the SDC on/off and Stim tables have been extended in time to cover the new data.
- API
NEW HORIZONS SDC PLUTO CRUISE CALIBRATED V2.0
data.nasa.gov | Last Updated 2023-01-26T20:25:34.000ZThis data set contains Calibrated data taken by the New Horizons Student Dust Counter instrument during the pluto cruise mission phase. This is VERSION 2.0 of this data set. SDC collected science data intermittently during the hibernation years following the Jupiter encounter, designated as the PLUTOCRUISE phase. There were also Annual Checkouts (ACOs), STIM calibrations, Noise calibrations, and an anomaly in November, 2007. SDC's main science data collection periods were during hibernation. During ACOs, science data are taken intermittently but the user must be careful in analyzing these data since there is usually more activity on the spacecraft during hibernation. STIM and Noise refer to scheduled calibrations and are done with a regular cadence of one per year after the Jupiter encounter; they occurred sporadically in the early years of the mission. Note that some SDC data files have the same stop and start time and a zero exposure time. The reason for this is that the start and stop time for SDC data files are the event times for the first and last events in the files, so for files that contain a single event, these two values are the same. The changes in Version 2.0 were re-running of the ancillary data in the data product, updated geometry from newer SPICE kernels, minor editing of the documentation, catalogs, etc., and resolution of liens from the December, 2014 review, plus those from the May, 2016 review of the Pluto Encounter data sets. New observations added with this version (V2.0) include ongoing cruise observations from August, 2014 through January, 2015.
- API
Rapid Electrochemical Detection and Identification of Microbiological and Chemical Contaminants for Manned Spaceflight Project
data.nasa.gov | Last Updated 2020-01-29T03:33:53.000Z<p>A great deal of effort has gone into the development of point-of-use methods to meet the challenge of rapid bacterial identification for both environmental monitoring and clinical applications.&nbsp; Unfortunately, most of the methods developed rely on Preliminary Chain Reaction (PCR) and face inherent limitations because of the requirement for enzymatic components and thermal control.&nbsp; Other methods based on surface plasmon resonance, quartz crystal microbalance, and fluorescence has been reported with good detection limits, but, these methods are immunological and cannot provide genetic-level information.&nbsp; Further, they require labeled markers, complicated fluid handling systems, and sensitive optics that drive up cost and complexity and preclude them from outside the laboratory.&nbsp; Recent work by a group at the University of Toronto has focused on developing an electrochemical platform that combines ultrasensitive detection, straightforward sample processing, and inexpensive components to create a cost-effective, user-friendly device for detection and identification of microorganisms.&nbsp; The platform combines an electrical cell lysis chamber, and electrochemical reporter system, and nanostructured microelectrodes (NMEs) to detect specific nucleic acid sequences.&nbsp; The nucleic acid sequences are unique to a given type of microorganism and can be used to identify the microorganisms present in a sample.</p><p>From the perspective of the anticipated prototype device &nbsp;(Lam, et al. 2012. <em>Polymerase Chain Reaction-Free, Sample-to-Answer Bacterial Detection in 30 Minutes with Integrated Cell Lysis</em>. Anal. Chem. <strong>84(1)</strong>: 21-5), detection of microbial contaminants will begin with a lysis chamber designed to release DNA and RNA from microorganisms present in the sample using ultrasonic or electrochemical technology.&nbsp; The DNA and RNA mixture is then passed into an analysis chamber containing an array of nanostructured microelectrodes (NMEs).&nbsp; The surface of the NMEs will be functionalized with probe molecules for DNA or RNA sequences specific to the bacteria being targeted.&nbsp; Binding of the DNA or RNA to the appropriate detection probe on the NME surface in the presence of an electrochemical reporter system will change the electrochemical properties of the NMEs.&nbsp; A potentiostat is used to measure the current at each individual electrode before and after addition of the DNA and RNA mixture.&nbsp; The difference in current before and after addition of the mixture to the NMEs is compared against a pre-determined threshold to check for the presence of target bacteria in the sample.&nbsp; The process for detection of chemical contaminants is very similar.&nbsp; The lysis chamber would be bypassed and the sample would flow directly into the analysis chamber.&nbsp; The NMEs will be functionalized with molecules to selectively bind the desired targets (analytes) and the change in the electrochemical response of each NME can again be used to detect and quantify the contaminants.&nbsp; Depending on the analyte of interest, it may be possible to directly measure analyte binding on the surface of the NMEs without the use of an electrochemical reporter system. The overall project will focus on optimization of the individual aspects of the detection platform in preparation for construction of a prototype for a flight experiment.&nbsp; The scope of the work in this proposal is limited to characterization and optimization of the lysis step/sample preparation, probe selection, and NME structure.&nbsp; Lysis conditions will be optimized by evaluating parameters associated with the oscillation frequency and lysis time for ultrasonic techniques and applied voltage for the electrochemical techniques.&nbsp; Cell viability, as determined by fluorescent detection of DNA or R
- API
Airborne Electro-Mechanical Actuator Test Stand for Development of Prognostic Health Management Systems
data.nasa.gov | Last Updated 2020-01-29T04:05:01.000ZWith the advent of the next generation of aerospace systems equipped with fly-by-wire controls, electro- mechanical actuators (EMA) are quickly becoming components critical to safety of aerospace vehicles. Being relatively new to the field, however, EMA lack the knowledge base compared to what is accumulated for the more traditional actuator types, especially when it comes to fault detection and prognosis. Scarcity of health monitoring data from fielded systems and prohibitive costs of carrying out real flight tests create the need to build high-fidelity system models and design affordable yet realistic experimental setups. The objective of this work is to build an EMA test stand that, unlike current laboratory stands typically weighing in excess of one metric ton, is portable enough to be easily placed aboard a wide variety of aircraft. This stand, named the FLEA (for Flyable Electro- mechanical Actuator test stand), allows testing EMA fault detection and prognosis technologies in flight environment, thus substantially increasing their technology readiness level – all without the expense of dedicated flights, as the stand is designed to function as a non-intrusive secondary payload. No aircraft modifications are required and data can be collected during any available flight opportunity: pilot currency flights, ferry flights, or flights dedicated to other experiments. The stand is currently equipped with a prototype version of NASA Ames developed prognostic health management system with models aimed at detecting and tracking several fault types. At this point the team has completed test flights of the stand on US Air Force C-17 aircraft and US Army UH-60 helicopters and more experiments, both laboratory and airborne, are planned for the coming months.
- API
SBIR/STTR Programs
data.nasa.gov | Last Updated 2020-01-29T04:18:05.000Z<p>The NASA SBIR and STTR programs fund the research, development, and demonstration of innovative technologies that fulfill NASA needs as described in the annual Solicitations and have significant potential for successful commercialization. If you are a small business concern (SBC) with 500 or fewer employees or a non-profit RI such as a university or a research laboratory with ties to an SBC, then NASA encourages you to learn more about the SBIR and STTR programs as a potential source of seed funding for the development of your innovations.</p><p><strong>The SBIR and STTR programs have 3 phases</strong>:</p><ul><li><strong>Phase I</strong> is the opportunity to establish the scientific, technical, and commercial feasibility of the proposed innovation in fulfillment of NASA needs.</li><li><strong>Phase II</strong> is focused on the development, demonstration and delivery of the proposed innovation.</li></ul><p>The SBIR and STTR Phase I contracts last for 6 months with a maximum funding of $125,000, and Phase II contracts last for 24 months with a maximum funding of $750,000 - $1.5 million.</p><ul><li><strong>Phase III</strong> is the commercialization of innovative technologies, products, and services resulting from either a Phase I or Phase II contract. Phase III contracts are funded from sources other than the SBIR and STTR programs and may be awarded without further competition.</li></ul><p><strong>Opportunity for Continued Technology Development Post-Phase II</strong>:</p><p>The NASA SBIR/STTR Program currently has in place two initiatives for supporting its small business partners past the basic Phase I and Phase II elements of the program that emphasize opportunities for commercialization. Specifically, the NASA SBIR/STTR Program has the Phase II Enhancement (Phase II-E) and Phase II eXpanded (Phase II-X) contract options.&nbsp;</p><p><strong>Please review the links below to obtain more information on the SBIR/STTR programs.</strong></p><ul><li><strong><a target="_blank" href="http://sbir.gsfc.nasa.gov/sites/default/files/ParticipationGuide.pdf">Participation Guide</a></strong></li></ul><p>Provides an overview of the SBIR and STTR programs as implemented by NASA</p><ul><li><strong><a href="http://sbir.gsfc.nasa.gov/solicitations">Program Solicitations</a></strong></li></ul><p>Provides access to the annual SBIR/STTR Solicitations containing detailed information on the program eligibility requirements, proposal instructions and research topics and subtopics</p><ul><li><strong><a href="http://sbir.gsfc.nasa.gov/prg_sched_anncmnt">Schedule and Awards</a></strong></li></ul><p>Schedule and links for the SBIR/STTR solicitations and selection announcements</p><ul><li><strong><a href="http://sbir.gsfc.nasa.gov/content/additional-sources-assistance">Sources of Assistance</a></strong></li></ul><p>Federal and non-Federal sources of assistance for small business</p><ul><li><strong><a href="http://sbir.gsfc.nasa.gov/abstract_archives">Awarded Abstracts</a></strong></li></ul><p>Search our complete archive of awarded project abstracts to learn about what NASA has funded</p><ul><li><strong><a href="http://sbir.gsfc.nasa.gov/content/frequently-asked-questions">Frequently Asked Questions</a></strong></li></ul><p>&nbsp;Still have questions? Visit the program FAQs</p>
- API
NEW HORIZONS SDC POST-LAUNCH CHECKOUT CALIBRATED V4.0
data.nasa.gov | Last Updated 2023-01-26T20:38:30.000ZThis data set contains Calibrated data taken by the New Horizons Student Dust Counter instrument during the post-launch checkout mission phase. This is VERSION 4.0 of this data set. The SDC instrument was commissioned on March 2, 2006 and stepped through a checkout of all instrument functionality successfully. Following these activities, SDC collected science data intermittently throughout the first year of the mission. The changes in Version 4.0 were re-running of the ancillary data in the data product, updated geometry from newer SPICE kernels, minor editing of the documentation, catalogs, etc., and resolution of liens from the December, 2014 review, plus those from the May, 2016 review of the Pluto Encounter data sets. No new observations were added with Version 4.0.
- API
NEW HORIZONS SDC JUPITER ENCOUNTER CALIBRATED V4.0
data.nasa.gov | Last Updated 2023-01-26T20:41:43.000ZThis data set contains Calibrated data taken by the New Horizons Student Dust Counter instrument during the Jupiter encounter mission phase. This is VERSION 4.0 of this data set. For the Jupiter encounter mission phase, SDC collected no science data during the Jupiter flyby, as the requisite spacecraft configuration prevented SDC from operating. There were some very sparse data taken from December, 2006 through April, 2007, and some of very short (or zero) duration after the Jupiter flyby from April, 2007 through June, 2007. The changes in Version 4.0 were re-running of the ancillary data in the data product, updated geometry from newer SPICE kernels, minor editing of the documentation, catalogs, etc., and resolution of liens from the December, 2014 review, plus those from the May, 2016 review of the Pluto Encounter data sets. No new observations were added with Version 4.0.