- API
Vital Signs: Transit Cost-Effectiveness – by operator
data.bayareametro.gov | Last Updated 2018-07-06T18:04:51.000ZVITAL SIGNS INDICATOR Transit Cost-Effectiveness (T13) FULL MEASURE NAME Net cost per transit boarding (cost per boarding minus fare per boarding) LAST UPDATED May 2017 DESCRIPTION Transit cost-effectiveness refers to both the total and net costs per transit boarding, both of which are adjusted to reflect inflation over time. Net costs reflect total operating costs minus farebox revenue (i.e. operating costs that are not directly funded by system users). The dataset includes metropolitan area, regional, mode, and system tables for net cost per boarding, total cost per boarding, and farebox recovery ratio. DATA SOURCE Federal Transit Administration: National Transit Database http://www.ntdprogram.gov/ntdprogram/data.htm Bureau of Labor Statistics: Consumer Price Index http://www.bls.gov/data/ CONTACT INFORMATION vitalsigns.info@mtc.ca.gov METHODOLOGY NOTES (across all datasets for this indicator) Simple modes were aggregated to combine the various bus modes (e.g. rapid bus, express bus, local bus) into a single mode to avoid incorrect conclusions resulting from mode recoding over the lifespan of NTD. For other metro areas, operators were identified by developing a list of all urbanized areas within a current MSA boundary and then using that UZA list to flag relevant operators; this means that all operators (both large and small) were included in the metro comparison data. Financial data was inflation-adjusted to match 2015 dollar values using metro-specific Consumer Price Indices.
- API
Vital Signs: Transit Cost-Effectiveness – by metro
data.bayareametro.gov | Last Updated 2018-07-06T18:04:53.000ZVITAL SIGNS INDICATOR Transit Cost-Effectiveness (T13) FULL MEASURE NAME Net cost per transit boarding (cost per boarding minus fare per boarding) LAST UPDATED May 2017 DESCRIPTION Transit cost-effectiveness refers to both the total and net costs per transit boarding, both of which are adjusted to reflect inflation over time. Net costs reflect total operating costs minus farebox revenue (i.e. operating costs that are not directly funded by system users). The dataset includes metropolitan area, regional, mode, and system tables for net cost per boarding, total cost per boarding, and farebox recovery ratio. DATA SOURCE Federal Transit Administration: National Transit Database http://www.ntdprogram.gov/ntdprogram/data.htm Bureau of Labor Statistics: Consumer Price Index http://www.bls.gov/data/ CONTACT INFORMATION vitalsigns.info@mtc.ca.gov METHODOLOGY NOTES (across all datasets for this indicator) Simple modes were aggregated to combine the various bus modes (e.g. rapid bus, express bus, local bus) into a single mode to avoid incorrect conclusions resulting from mode recoding over the lifespan of NTD. For other metro areas, operators were identified by developing a list of all urbanized areas within a current MSA boundary and then using that UZA list to flag relevant operators; this means that all operators (both large and small) were included in the metro comparison data. Financial data was inflation-adjusted to match 2015 dollar values using metro-specific Consumer Price Indices.
- API
Vital Signs: Rent Payments – Bay Area
data.bayareametro.gov | Last Updated 2019-10-25T20:17:35.000ZVITAL SIGNS INDICATOR Rent Payments (EC8) FULL MEASURE NAME Median rent payment LAST UPDATED September 2016 DESCRIPTION Rent payments refer to the cost of leasing an apartment or home and serves as a measure of housing costs for individuals who do not own a home. The data reflect the median monthly rent paid by Bay Area households across apartments and homes of various sizes and various levels of quality. This differs from advertised rents for available apartments, which usually are higher. Note that rent can be presented using nominal or real (inflation-adjusted) dollar values; data are presented inflation-adjusted to reflect changes in household purchasing power over time. DATA SOURCE U.S. Census Bureau: Decennial Census 1970-2000 https://nhgis.org Note: Count 1 and Count 2; Form STF1; Form SF3a U.S. Census Bureau: American Community Survey 2005-2015 http://api.census.gov Note: Form B25058; 1-YR Bureau of Labor Statistics: Consumer Price Index 1970-2015 http://data.bls.gov Note: All Urban Consumers Data Table (by metro) CONTACT INFORMATION vitalsigns.info@mtc.ca.gov METHODOLOGY NOTES (across all datasets for this indicator) Rent data reflects median rent payments rather than list rents (refer to measure definition above). Larger geographies (metro and county) rely upon ACS 1-year data, while smaller geographies rely upon ACS 5-year rolling average data. 1970 Census data for median rent payments has been imputed by ABAG staff as the source data only provided the mean, rather than the median, monthly rent. Metro area boundaries reflects today’s metro area definitions by county for consistency, rather than historical metro area boundaries. Inflation-adjusted data are presented to illustrate how rent payments have grown relative to overall price increases; that said, the use of the Consumer Price Index does create some challenges given the fact that housing represents a major chunk of consumer goods bundle used to calculate CPI. This reflects a methodological tradeoff between precision and accuracy and is a common concern when working with any commodity that is a major component of CPI itself.
- API
Vital Signs: Rent Payments – by metro
data.bayareametro.gov | Last Updated 2019-10-25T20:17:20.000ZVITAL SIGNS INDICATOR Rent Payments (EC8) FULL MEASURE NAME Median rent payment LAST UPDATED August 2019 DESCRIPTION Rent payments refer to the cost of leasing an apartment or home and serves as a measure of housing costs for individuals who do not own a home. The data reflect the median monthly rent paid by Bay Area households across apartments and homes of various sizes and various levels of quality. This differs from advertised rents for available apartments, which usually are higher. Note that rent can be presented using nominal or real (inflation-adjusted) dollar values; data are presented inflation-adjusted to reflect changes in household purchasing power over time. DATA SOURCE U.S. Census Bureau: Decennial Census 1970-2000 https://nhgis.org Note: Count 1 and Count 2; Form STF1; Form SF3a U.S. Census Bureau: American Community Survey 2005-2017 http://api.census.gov Note: Form B25058; 1-YR Bureau of Labor Statistics: Consumer Price Index 1970-2017 http://www.bls.gov/data/ Note: All Urban Consumers Data Table (by metro) CONTACT INFORMATION vitalsigns.info@bayareametro.gov METHODOLOGY NOTES (across all datasets for this indicator) Rent data reflects median rent payments rather than list rents (refer to measure definition above). Larger geographies (metro and county) rely upon ACS 1-year data, while smaller geographies rely upon ACS 5-year rolling average data. 1970 Census data for median rent payments has been imputed by ABAG staff as the source data only provided the mean, rather than the median, monthly rent. Metro area boundaries reflects today’s metro area definitions by county for consistency, rather than historical metro area boundaries. Inflation-adjusted data are presented to illustrate how rent payments have grown relative to overall price increases; that said, the use of the Consumer Price Index does create some challenges given the fact that housing represents a major chunk of consumer goods bundle used to calculate CPI. This reflects a methodological tradeoff between precision and accuracy and is a common concern when working with any commodity that is a major component of CPI itself.
- API
Vital Signs: Greenfield Development – by metro area
data.bayareametro.gov | Last Updated 2020-07-03T16:36:42.000ZVITAL SIGNS INDICATOR Greenfield Development (LU5) FULL MEASURE NAME The acres of construction on previously undeveloped land LAST UPDATED November 2019 DESCRIPTION Greenfield development refers to construction on previously undeveloped land and the corresponding expansion of our region’s developed footprint, which includes the extent of urban and built-up lands. The footprint is defined as land occupied by structures, with a building density of at least 1 unit to 1.5 acres. DATA SOURCE Department of Conservation: Farmland Mapping and Monitoring Program GIS Data Tables/Layers (1990-2016) https://www.conservation.ca.gov/dlrp/fmmp U.S. Census Bureau: Decennial Census Population by Census Block Group (2000-2010) http://factfinder.census.gov U.S. Census Bureau: American Community Survey (5-year) Population by Census Block Group (2000-2017) http://factfinder.census.gov METHODOLOGY NOTES (across all datasets for this indicator) For regional and local data, FMMP maps the extent of “urban and built-up” lands, which generally reflect the developed urban footprint of the region. The footprint is defined as land occupied by structures with building density of at least 1 unit to 1.5 acres. Uses include residential, industrial, commercial, construction, institutional, public administration, railroad and other transportation yards, cemeteries, airports, golf courses, sanitary landfills, sewage treatment, water control structures, and other developed purposes. To determine the amount of greenfield development (in acres) occurring in a given two-year period, the differences in urban footprint are computed on a county-level. FMMP makes slight refinements to urban boundaries over time, so changes in urban footprint +/- 100 acres are not regionally significant. The GIS shapefile represents the 2016 urban footprint and thus does not show previously urbanized land outside of the footprint (i.e. Hamilton Air Force Base). For metro comparisons, a different methodology had to be used to avoid the geospatial limitations associated with FMMP. U.S. Census population by census block group was gathered for each metro area for 2000, 2010, and 2017. Population data for years 2000 and 2010 come from the Decennial Census while data for 2018 comes from the 2017 5-year American Community Survey. The block group was considered urbanized if its average/gross density was greater than 1 housing unit per acre (a slightly higher threshold than FMMP uses for its definition). Because a block group cannot be flagged as partially urbanized, and non-residential uses are not fully captured, the urban footprint of the region calculated with this methodology is smaller than in FMMP. The metro data should be primarily used for looking at comparative growth rate in greenfield development rather than the acreage totals themselves.
- API
Vital Signs: Greenhouse Gas Emissions - by county
data.bayareametro.gov | Last Updated 2018-07-10T01:36:51.000ZVITAL SIGNS INDICATOR Greenhouse Gas Emissions (EN3) FULL MEASURE NAME Greenhouse gas emissions from primary sources LAST UPDATED August 2017 DESCRIPTION Greenhouse gas emissions refer to carbon dioxide and other chemical compounds that contribute to global climate change. Vital Signs tracks greenhouse gas emissions linked to consumption from the three largest sources in the region: surface transportation, electricity consumption, and natural gas consumption. This measure helps track progress towards achieving regional greenhouse gas reduction targets, including the region's per-capita greenhouse gas target for surface transportation under Senate Bill 375. This dataset includes emissions estimates on the regional and county levels. DATA SOURCE California Energy Commission: Retail Fuel Outlet Annual Reporting 2010-2012, 2015 Form CEC-A15 http://www.energy.ca.gov/almanac/transportation_data/gasoline/piira_retail_survey.html Energy Information Administration: CO2 Conversion Data 2015 conversion purposes only; consistent over time http://www.eia.gov/tools/faqs/faq.cfm?id=307&t=11 California Energy Commission: Electricity Consumption by County 2003-2015 http://www.ecdms.energy.ca.gov/elecbycounty.aspx Pacific Gas & Electric Company: Greenhouse Gas Emission Factors 2003-2013 audited by the Climate Registry; conversion purposes only https://www.pge.com/includes/docs/pdfs/shared/environment/calculator/pge_ghg_emission_factor_info_sheet.pdf Pacific Gas & Electric Company: Greenhouse Gas Emission Factors 2014-2015 audited by the Climate Registry; conversion purposes only http://www.pgecurrents.com/2017/02/09/pge-cuts-carbon-emissions-with-clean-energy-2/ California Energy Commission: Natural Gas Consumption by County 1990-2015 http://www.ecdms.energy.ca.gov/gasbycounty.aspx Pacific Gas & Electric Company: Climate Footprint Calculator 2015 conversion purposes only; consistent over time https://www.pge.com/includes/docs/pdfs/about/environment/calculator/assumptions.pdf California Department of Finance: Population and Housing Estimates 1990-2015 http://www.dof.ca.gov/research/demographic/ CONTACT INFORMATION vitalsigns.info@mtc.ca.gov METHODOLOGY NOTES (across all datasets for this indicator) For surface transportation, the dataset is based on a survey of fueling stations, the vast majority of which respond to the survey; the Energy Commission corrects for non-response bias by imputing the remaining share of fuel sales. Note that 2014 data was excluded to data abnormalities for several counties in the region; methodology improvements in 2012 affected estimated by +/- 5% according to CEC estimates. For years 2013 and 2014, a linear trendline assumption was used instead between 2012 and 2015 data points. Greenhouse gas emissions are calculated based on the gallons of gasoline and diesel sales, relying upon standardized Energy Information Administration conversion rates for E10 fuel (gasoline with 10% ethanol) and standard diesel. Per-capita greenhouse gas emissions are calculated simply by dividing emissions attributable to fuel sold in that county by the total number of county residents; there may be a slight bias in the data given that a fraction of fuel sold in a given county may be purchased by non-residents. For electricity consumption, the dataset is based on electricity consumption data for the nine Bay Area counties; note that this is different than electricity production as the region imports electricity. Because such data is not disaggregated by utility provider, a simple assumption is made that electricity consumed has the greenhouse gas emissions intensity (on a kilowatt-hour basis) of Pacific Gas & Electric, the primary electricity provider in the Bay Area. For this reason, with the small but growing market share of low- and zero-GHG community choice aggregation (CCA) providers, the greenhouse gas emissions estimate in more recent years may be slightly overe
- API
RHNA Draft Performance Measures - Categorized v2
data.bayareametro.gov | Last Updated 2020-05-13T23:48:02.000ZDataset describes jurisdictions according to 8 measures which will be used to gauge RHNA performance. Each measure has been categorized into discrete buckets, for use in summarizing the jurisdiction-specific RHNA allocation. The core metrics mapping directly to CA HCD objective metrics include: Measure 1a: Lower Income RHNA in High Cost Areas Measure 1b: Lower Income RHNA in Single-Family Home Areas Measure 2a: Household Growth in Job Centers Measure 3a: Lower Income RHNA in Jobs-Housing Fit Imbalanced Areas Measure 4a: Lower Income RHNA in Areas with High Share of Low-Income Households Measure 4b: Lower Income RHNA in Areas with High Share of High-Income Households Measure 5a: Lower Income RHNA in High Opportunity Areas Measure 5b: Household Growth in High Divergence Score Areas with High-Income Households Measure 6b: Household Growth in High Hazard Risk Areas
- API
Vital Signs: Transit Cost-Effectiveness – Bay Area
data.bayareametro.gov | Last Updated 2018-07-06T18:04:54.000ZVITAL SIGNS INDICATOR Transit Cost-Effectiveness (T13) FULL MEASURE NAME Net cost per transit boarding (cost per boarding minus fare per boarding) LAST UPDATED May 2017 DESCRIPTION Transit cost-effectiveness refers to both the total and net costs per transit boarding, both of which are adjusted to reflect inflation over time. Net costs reflect total operating costs minus farebox revenue (i.e. operating costs that are not directly funded by system users). The dataset includes metropolitan area, regional, mode, and system tables for net cost per boarding, total cost per boarding, and farebox recovery ratio. DATA SOURCE Federal Transit Administration: National Transit Database http://www.ntdprogram.gov/ntdprogram/data.htm Bureau of Labor Statistics: Consumer Price Index http://www.bls.gov/data/ CONTACT INFORMATION vitalsigns.info@mtc.ca.gov METHODOLOGY NOTES (across all datasets for this indicator) Simple modes were aggregated to combine the various bus modes (e.g. rapid bus, express bus, local bus) into a single mode to avoid incorrect conclusions resulting from mode recoding over the lifespan of NTD. For other metro areas, operators were identified by developing a list of all urbanized areas within a current MSA boundary and then using that UZA list to flag relevant operators; this means that all operators (both large and small) were included in the metro comparison data. Financial data was inflation-adjusted to match 2015 dollar values using metro-specific Consumer Price Indices.
- API
Vital Signs: Seaport Activity – by metro area
data.bayareametro.gov | Last Updated 2019-10-25T20:09:10.000ZVITAL SIGNS INDICATOR Seaport Activity (EC18) FULL MEASURE NAME Shipping containers moved (TEUs) LAST UPDATED August 2019 DESCRIPTION Seaport activity refers to the quantity of goods moved into or out of the region through seaports. Seaport activity is measured at major ports by the number of shipping containers moved; these are known as twenty-foot equivalent units (TEUs). DATA SOURCE American Association of Port Authorities: Western Hemisphere Port TEU Container Volumes 1990-2017 https://www.aapa-ports.org/unifying/content.aspx?ItemNumber=21048 Port of Oakland 1990-2018 https://www.oaklandseaport.com/performance/facts-figures/ CONTACT INFORMATION vitalsigns.info@bayareametro.gov METHODOLOGY NOTES (across all datasets for this indicator) Container volumes include both empty and full containers that move through a given port; they include imports, exports, and domestic freight flows.
- API
Vital Signs: Transit Cost-Effectiveness – by Mode
data.bayareametro.gov | Last Updated 2018-07-06T18:04:45.000ZVITAL SIGNS INDICATOR Transit Cost-Effectiveness (T13) FULL MEASURE NAME Net cost per transit boarding (cost per boarding minus fare per boarding) LAST UPDATED May 2017 DESCRIPTION Transit cost-effectiveness refers to both the total and net costs per transit boarding, both of which are adjusted to reflect inflation over time. Net costs reflect total operating costs minus farebox revenue (i.e. operating costs that are not directly funded by system users). The dataset includes metropolitan area, regional, mode, and system tables for net cost per boarding, total cost per boarding, and farebox recovery ratio. DATA SOURCE Federal Transit Administration: National Transit Database http://www.ntdprogram.gov/ntdprogram/data.htm Bureau of Labor Statistics: Consumer Price Index http://www.bls.gov/data/ CONTACT INFORMATION vitalsigns.info@mtc.ca.gov METHODOLOGY NOTES (across all datasets for this indicator) Simple modes were aggregated to combine the various bus modes (e.g. rapid bus, express bus, local bus) into a single mode to avoid incorrect conclusions resulting from mode recoding over the lifespan of NTD. For other metro areas, operators were identified by developing a list of all urbanized areas within a current MSA boundary and then using that UZA list to flag relevant operators; this means that all operators (both large and small) were included in the metro comparison data. Financial data was inflation-adjusted to match 2015 dollar values using metro-specific Consumer Price Indices.