- API
Half Moon Bay Solid Waste Contribution to Greenhouse Gas Emissions column chart 2
datahub.smcgov.org | Last Updated 2019-05-10T16:59:26.000ZData by city showing solid waste contribution to greenhouse gas emissions in the County. This data is part of the Regionally Integrated Climate Action Planning Suite (RICAPS) program. Each city in San Mateo County has the opportunity to develop its own Climate Action Plan (CAP) using tools developed by C/CAG in conjunction with DNV KEMA https://www.dnvgl.com/ and Hara. http://www.verisae.com/default.aspx. This project was funded by grants from the Bay Area Air Quality Management District (BAAQMD) and Pacific Gas and Electric Company (PG&E). Climate Action Plans developed from these tools will meet BAAQMD's California Environmental Quality Act (CEQA) guidelines for a Qualified Greenhouse Gas Reduction Strategy. For more information, please see the RICAPS site: http://www.smcenergywatch.com/progress_report.html
- API
Low Noise Millimeter Wave LNA Project
nasa-test-0.demo.socrata.com | Last Updated 2015-07-20T05:24:11.000ZThe Phase I effort will result in a low noise MMIC G-Band amplifier the covers the entire 165 to 193GHz frequency range. The amplifier will be designed using a 50nm MHEMT that has already been developed by BAE Systems that enables the state-of-the-art performance to be achieved. The innovative amplifier design will have a gain of 20dB, a noise figure of less than 6dB(~4dB, an input output VSWR of less than 2:1. In addition, the MHEMT has the added advantage of having lower noise power stability and 1/f noise than InP devices. A balanced amplifier is the primary approach while a single ended unit will be investigated for missions that require reduced bandwidths. The MMIC amplifier will be designed to be inserted into a waveguide housing for additional and environmental testing in a Phase II program. At completion of the Phase II program, the amplifier will be capable of being space qualified for NASA missions.
- API
Ultra Low Noise 1.06 Micron Laser Oscillator Project
nasa-test-0.demo.socrata.com | Last Updated 2015-07-20T05:29:00.000ZThe Laser Interferometer Space Antenna (LISA) demand state-of-the-art ultra-stable and low noise coherent lasers. This is a proposal to develop a space qualified high power, single mode, low noise and narrow linewidth fiber laser based on a"virtual ring" laser cavity at the 1.06 micron spectral band. This novel laser architecture enables traveling-wave oscillation in a compact, linear and all-fiber cavity. This leads to unprecedented low noise and stable laser oscillator. The all fiber device also offers a highly reliable, compact and power conserving solution. We have already demonstrated virtual ring oscillators at the 1.55 micron band that rival the state of the ring laser architecture. In this research we will develop a 1.06 micron laser that can meet or exceed the LISA experiment required laser specifications.
- API
2008 Environmental Performance Index (EPI)
nasa-test-0.demo.socrata.com | Last Updated 2015-07-19T07:26:08.000ZThe 2008 Environmental Performance Index (EPI) centers on two broad environmental protection objectives: (1) reducing environmental stresses on human health, and (2) promoting ecosystem vitality and sound natural resource management. Derived from a careful review of the environmental literature, these twin goals mirror the priorities expressed by policymakers. Environmental health and ecosystem vitality are gauged using 25 indicators tracked in six well-established policy categories: Environmental Health (Environmental Burden of Disease, Water, and Air Pollution), Air Pollution (effects on ecosystems), Water (effects on ecosystems), Biodiversity and Habitat, Productive Natural Resources (Forestry, Fisheries, and Agriculture), and Climate Change. The 2008 EPI utilizes a proximity-to-target methodology in which performance on each indicator is rated on a 0 to 100 scale (100 represents at target). By identifying specific targets and measuring how close each country comes to them, the EPI provides a foundation for policy analysis and a context for evaluating performance. Issue-by-issue and aggregate rankings facilitate cross-country comparisons both globally and within relevant peer groups. The 2008 EPI is the result of collaboration among the Yale Center for Environmental Law and Policy (YCELP), Columbia University Center for International Earth Science Information Network (CIESIN), World Economic Forum (WEF), and the Joint Research Centre (JRC), European Commission.
- API
Adams - N and AvgCap
data.colorado.gov | Last Updated 2024-05-01T19:38:57.000ZThis dataset includes all non-24 hour licensed child care facilities in the State of Colorado. It is updated monthly, and is intended for public use. It includes CDHS-issued child care license numbers, legal business names as they appear in the licensing application, the types of service the programs provide, the physical location addresses of the programs as they appear in the licensing application, the longitude-latitude coordinate values derived from geocoding services and spatial QA, the valid Colorado Shines quality rating levels (if applicable), total licensed capacities, and CCCAP utilization and fiscal agreement. Note: As of Jan 1, 2021, the following fields are temporarily unavailable in this release: `CCCAP CHILD COUNT_D1`, `CCCAP CASE COUNT_D1`, and `CCCAP_AMOUNT_PAID_D1`. These columns will be included again in the near future. Please contact the dataset owner for more information as necessary. Disclaimer: The State of Colorado, the Colorado Department of Human Services, and the Office of Early Childhood make no representations or warranties expressed or implied, with respect to the use of data provided herewith regardless of its format or the means of its transmission. There is no guarantee or representation to the user as to the accuracy, currency, suitability, or reliability of this data for any purpose. The user accepts the data “as is”. The State of Colorado assumes no responsibility for loss or damage incurred as a result of any user reliance on this data. Users of this information should review or consult the primary data and information sources to ascertain the usability of the information. The State of Colorado does not necessarily endorse any interpretations or products derived from the data.
- API
Multi Family Garbage Composition - Diversion Potential
data.calgary.ca | Last Updated 2023-02-01T15:39:37.000ZThis chart shows multi family garbage bin composition, grouped by diversion potential. The multi-family results represent garbage bin waste from multi-family complexes, and represents the pooled average of samples in each of the four seasons of 2019 (40 samples). The multi-family developments sampled included both low rise and high rise types, and all were customers of The City’s Commercial Collections service. Waste Composition studies are periodically conducted by Waste and Recycling Services to help assess the performance of diversion and education programs and inform improvements and new program design.
- API
GPM, DPR, GMI Level 3 Combined Precipitation V03
nasa-test-0.demo.socrata.com | Last Updated 2015-07-20T05:03:54.000ZThere are uncertainties in the interpretation of data from any one of the instruments (KuPR, KaPR, and GMI). By using data from multiple instruments, further constraints on the solution of precipitation structure improve the final product.The purpose of 3CMB is to give a daily and monthly accumulation of the 2BCMB precipitation product. The 3CMB product is a daily and monthly accumulation of the 2BCMB orbital combined product at two grid sizes, 5 x 5 degrees (G1) and 0.25 x 0.25 degrees (G2). Grid G1 contains the following physical measurements of general interest, among others. Grid G2 contains the same groups, but it is on the ltH x lnH grid and does not have the surface type (st) dimension or the histograms (see dimension definitions below). Below, conditional products represent means based upon precipitating areas only; unconditional products represent means for raining and non-raining areas combined. Probabilities represent the number of raining observations divided by the total number of raining and non-raining observations. precipTotRate (Group in G1)- Conditional mean rate for all precipitation phases (ice, liquid, mixed-phase). * count (4-byte integer, array size: ltL x lnL x ns x hgt x rt x st): Count. * mean (4-byte float, array size: ltL x lnL x ns x hgt x rt x st): Mean, mm/h. * stdev (4-byte float, array size: ltL x lnL x ns x hgt x rt x st): Standard deviation for the monthly product. Mean of squares for the daily product, mm/h. * hist (4-byte integer, array size: ltL x lnL x ns x hgt x rt x st x bin): Histogram. precipLiqRate (Group in G1) - Conditional mean rate for liquid precipitation. * count (4-byte integer, array size: ltL x lnL x ns x hgt x rt x st): Count. * mean (4-byte float, array size: ltL x lnL x ns x hgt x rt x st): Mean, mm/h. * stdev (4-byte float, array size: ltL x lnL x ns x hgt x rt x st): Standard deviation for the monthly product. Mean of squares for the daily product, mm/h. * hist (4-byte integer, array size: ltL x lnL x ns x hgt x rt x st x bin): Histogram. precipTotWaterContent (Group in G1) - Conditional mean water content for all precipitation phases. * count (4-byte integer, array size: ltL x lnL x ns x hgt x rt x st): Count. * mean (4-byte float, array size: ltL x lnL x ns x hgt x rt x st): Mean, g/m3. * stdev (4-byte float, array size: ltL x lnL x ns x hgt x rt x st): Standard deviation for the monthly product. Mean of squares for the daily product, g/m3. * hist (4-byte integer, array size: ltL x lnL x ns x hgt x rt x st x bin): Histogram. precipLiqWaterContent (Group in G1) - Conditional mean liquid water content. * count (4-byte integer, array size: ltL x lnL x ns x hgt x rt x st): Count. * mean (4-byte float, array size: ltL x lnL x ns x hgt x rt x st): Mean, g/m3. * stdev (4-byte float, array size: ltL x lnL x ns x hgt x rt x st): Standard deviation for the monthly product. Mean of squares for the daily product, g/m3. * hist (4-byte integer, array size: ltL x lnL x ns x hgt x rt x st x bin): Histogram. precipTotDm (Group in G1) - Conditional mass-weighted mean particle diameter. * count (4-byte integer, array size: ltL x lnL x ns x hgt x rt x st): Count. * mean (4-byte float, array size: ltL x lnL x ns x hgt x rt x st): Mean, mm. * stdev (4-byte float, array size: ltL x lnL x ns x hgt x rt x st): Standard deviation for the monthly product. Mean of squares for the daily product, mm. * hist (4-byte integer, array size: ltL x lnL x ns x hgt x rt x st x bin): Histogram. precipTotRateDiurnal (Group in G1) - Conditional mean total surface precipitation rate indexed by local time. * count (4-byte integer, array size: ltL x lnL x ns x st x tim): Count. * mean (4-byte float, array size: ltL x lnL x ns x st x tim): Mean, mm/h. * stdev (4-byte float, array size: ltL x lnL x ns x st x tim): Standard deviation for the monthly product. Mean of squares for the daily product, mm/h. surfPrecipTotRateDiurnalAllObs (4-byte integer, array size: ltL x lnL x ns x st x tim): Number of total observa...
- API
Incidents vs Rescued to Shelter
www.dallasopendata.com | Last Updated 2021-08-17T20:59:04.000ZDallas Animal Services data that pertains to operations by Animal Services Officers (ASO) who respond to calls in the field throughout the City of Dallas. ASO’s document their work using Chameleon software, an animal shelter software program. The document will be updated on a daily basis, so that citizens have a greater understanding of what ASO’s are doing in the neighborhoods of Dallas. “Helping Dallas be a safe, compassionate, and healthy place for people and animals”. Start date is October 01, 2016
- API
Single Family Black Cart Material Diversion Potential
data.calgary.ca | Last Updated 2023-02-01T15:39:46.000ZWaste Composition studies are periodically conducted by Waste and Recycling Services to help assess the performance of diversion and education programs and inform improvements and new program design. This dataset is for Black Cart waste from residential dwellings, and represents the pooled average of samples of 20-25 residences collected in 18 communities in each of the four seasons of 2019 (72 samples). The communities sampled were selected to collectively represent the range of housing types and demographics in Calgary. The weight per cent composition is provided for a number of material categories and subcategories. See https://www.calgary.ca/UEP/WRS/Pages/Garbage-collection-information/Residential-services/Garbage-Collection.aspx for more information.
- API
CL Apartment new Bldg
data.lacity.org | Last Updated 2023-05-22T09:33:24.000ZThe Department of Building and Safety issues permits for the construction, remodeling, and repair of buildings and structures in the City of Los Angeles. Permits are categorized into building permits, electrical permits, and mechanical permits (which include plumbing, HVAC systems, fire sprinklers, elevators, and pressure vessels). Depending on the complexity of a project, a permit may be issued the same day with Express Permit or e-Permit ("No Plan Check" category), or a permit may require that the plans be reviewed ("Plan Check" category) by a Building and Safety Plan Check personnel.