- API
Nano Dust Analyzer Project
data.nasa.gov | Last Updated 2020-01-29T04:54:41.000Z<p> We propose to develop a new highly sensitive instrument to confirm the existence of the so-called nano-dust particles, characterize their impact parameters, and measure their chemical composition. Simultaneous theoretical studies will be used to derive the expected&nbsp; mass and velocity ranges of these putative particles to formulate science and measurement requirements for the future deployment of&nbsp; the proposed Nano-Dust Analyzer (NDA)&nbsp;</p> <p> Early dust instruments onboard Pioneer 8 and 9 and Helios spacecraft detected a flow of submicron sized dust particles coming from the direction of the Sun. These particles originate in the inner solar system from mutual collisions among meteoroids and move on&nbsp; hyperbolic orbits that leave the Solar System under the prevailing radiation pressure force. Later dust instruments with higher&nbsp; sensitivity had to avoid looking toward the Sun because of interference from the solar wind and UV radiation and thus contributed&nbsp; little to the characterization of the dust stream. The one exception is the Ulysses dust detector that observed escaping dust particles&nbsp; high above the solar poles, which confirm the suspicion that charged nanometer sized dust grains are carried to high heliographic&nbsp; latitudes by electromagnetic interactions with the Interplanetary Magnetic Field (IMF). Recently, the STEREO WAVES instruments&nbsp; recorded a large number of intense electric field signals, which were interpreted as impacts from nanometer sized particles striking the&nbsp; spacecraft with velocities of about the solar wind speed. This high flux and strong spatial and/or temporal variations of nanometer&nbsp; sized dust grains at low latitude appears to be uncorrelated with the solar wind properties. This is a mystery as it would require that&nbsp; the total collisional meteoroid debris inside 1 AU is cast in nanometer sized fragments. The observed fluxes of inner-source pickup ions&nbsp; also point to the existence of a much enhanced dust population in the nanometer size range.&nbsp;</p> <p> This new heliospherical phenomenon of nano-dust streams may have consequences throughout the planetary system, but as of yet no dust instrument exists that could be used to shed light on their properties. &nbsp;We propose to develop a dust analyzer capable to detect and&nbsp; analyze these mysterious dust particles coming from the solar direction and to embark upon complementary theoretical studies to&nbsp; understand their characteristics. The instrument is based on the Cassini Dust Analyzer (CDA) that has analyzed the composition of&nbsp; nanometer sized dust particles emanating from the Jovian and Saturnian systems but could not be pointed towards the Sun. By&nbsp; applying technologies implemented in solar wind instruments and coronagraphs a highly sensitive dust analyzer will be developed and&nbsp; tested in the laboratory. The dust analyzer shall be able to characterize impact properties (impact charge and energy distribution of&nbsp; ions from which mass and speed of the impacting grains may be derived) and chemical composition of individual nanometer sized&nbsp; particles while exposed to solar wind and UV radiation. The measurements will enable us to identify the source of the dust by&nbsp; comparing their elemental composition with that of larger micrometeoroid particles of cometary and asteroid origin and will reveal&nbsp; interaction of nano-dust with the interplanetary medium by investigating the relation of the dust flux with solar wind and IMF&nbsp; properties.&nbsp;</p> <p> Complementary theoretically studies will be performed to understand the characteristics of nano-dust particles at 1 AU to answer the&nbsp; following questions:&nbsp; - What is the speed range at which nanometer sized particles impact
- API
India Annual Winter Cropped Area, 2001-2016
data.nasa.gov | Last Updated 2022-01-17T05:29:43.000ZThe India Annual Winter Cropped Area, 2001 - 2016 consists of annual winter cropped areas for most of India (except the Northeastern states) from 2000-2001 to 2015-2016. This data set utilizes the NASA Moderate Resolution Imaging Spectroradiometer (MODIS) Enhanced Vegetation Index (EVI; spatial resolution: 250m) for the winter growing season (October-March). The methodology uses an automated algorithm identifying the EVI peak in each pixel for each year and linearly scales the EVI value between 0% and 100% cropped area within that particular pixel. Maps were then resampled to 1 km and were validated using high-resolution QuickBird, RapidEye, SkySat, and WorldView-2 images spanning 2008 to 2016 across 11 different agricultural regions of India. The spatial resolution of the data set is 1 km, resampled from 250m. The data are distributed as GeoTIFF and NetCDF files and are in WGS 84 projection.
- API
GPM Ground Validation SEA FLUX ICE POP V1
data.nasa.gov | Last Updated 2022-06-07T06:12:15.000ZThe GPM Ground Validation SEA FLUX ICE POP dataset includes estimates of ocean surface latent and sensible heat fluxes, 10m wind speed, 10m air temperature, 10m air humidity, and skin sea surface temperature in support of the International Collaborative Experiments for Pyeongchang 2018 Olympic and Paralympic Winter Games (ICE-POP) field campaign in South Korea. The two major objectives of ICE-POP were to study severe winter weather events in regions of complex terrain and improve the short-term forecasting of such events. These data contributed to the Global Precipitation Measurement mission Ground Validation (GPM GV) campaign efforts to improve satellite estimates of orographic winter precipitation. This data file is available in netCDF-4 format from September 1, 2017 through April 30, 2018.
- API
OWLETS-1 Ozonesonde Data
data.nasa.gov | Last Updated 2022-07-18T13:04:47.000ZOWLETS1_Sondes_Data_1 is the Ozone Water-Land Environmental Transition Study (OWLETS-1) ozone data collected via synchronous ozonesonde launches at the NASA Langley Research Center ground site and Chesapeake Bay Bridge Tunnel site during the OWLETS field campaign. OWLETS was supported by the NASA Science Innovation Fund (SIF). Data collection is complete. Coastal regions have typically posed a challenge for air quality researchers due to a lack of measurements available over water and water-land boundary transitions. Supported by NASA’s Science Innovation Fund (SIF), the Ozone Water-Land Environmental Transition Study (OWLETS) field campaign examined ozone concentrations and gradients over the Chesapeake Bay from July 5, 2017 – August 3, 2017, with twelve intensive measurement days occurring during this time period. OWLETS utilized a unique combination of instrumentation, including aircraft, TOLNet ozone lidars (NASA Goddard Space Flight Center Tropospheric Ozone Differential Absorption Lidar and NASA Langley Research Center Mobile Ozone Lidar), UAV/drones, ozonesondes, AERONET sun photometers, and mobile and ship-based measurements, to characterize the land-water differences in ozone and other pollutants. Two main research sites were established as part of the campaign: an over-land site at NASA LaRC, and an over-water site at the Chesapeake Bay Bridge Tunnel. These two research sites were established to provide synchronous vertical measurements of meteorology and pollutants over water and over land. In combination with mobile observations between the two sites, pollutant gradients were able to be observed and used to better understand the fundamental processes occurring at the land-water interface. OWLETS-2 was completed from June 6, 2018 – July 6, 2018 in the upper Chesapeake Bay region. Research sites were established at the University of Maryland, Baltimore County (UMBC), Hart Miller Island (HMI), and Howard University Beltsville (HUBV), with HMI representing the over-water location and UMBC and HUBV representing the over-land sites. Similar measurements were carried out to further characterize water-land gradients in the upper Chesapeake Bay. The measurements completed during OWLETS are of importance in enhancing air quality models, and improving future satellite retrievals, particularly, NASA’s Tropospheric Emissions: Monitoring of Pollution, which is scheduled to launch in 2022.
- API
2008 Environmental Performance Index (EPI)
data.nasa.gov | Last Updated 2022-01-17T05:02:20.000ZThe 2008 Environmental Performance Index (EPI) centers on two broad environmental protection objectives: (1) reducing environmental stresses on human health, and (2) promoting ecosystem vitality and sound natural resource management. Derived from a careful review of the environmental literature, these twin goals mirror the priorities expressed by policymakers. Environmental health and ecosystem vitality are gauged using 25 indicators tracked in six well-established policy categories: Environmental Health (Environmental Burden of Disease, Water, and Air Pollution), Air Pollution (effects on ecosystems), Water (effects on ecosystems), Biodiversity and Habitat, Productive Natural Resources (Forestry, Fisheries, and Agriculture), and Climate Change. The 2008 EPI utilizes a proximity-to-target methodology in which performance on each indicator is rated on a 0 to 100 scale (100 represents �at target�). By identifying specific targets and measuring how close each country comes to them, the EPI provides a foundation for policy analysis and a context for evaluating performance. Issue-by-issue and aggregate rankings facilitate cross-country comparisons both globally and within relevant peer groups. The 2008 EPI is the result of collaboration among the Yale Center for Environmental Law and Policy (YCELP), Columbia University Center for International Earth Science Information Network (CIESIN), World Economic Forum (WEF), and the Joint Research Centre (JRC), European Commission.
- API
Global gene expression analysis highlights microgravity sensitive key genes in soleus and EDL of 30 days space flown mice
data.nasa.gov | Last Updated 2023-01-26T18:49:58.000ZMicrogravity exposure as well as chronic muscle disuse are two of the main causes of physiological adaptive skeletal muscle atrophy in humans and murine animals in physiological condition. The aim of this study was to investigate at both morphological and global gene expression level skeletal muscle adaptation to microgravity in mouse soleus and extensor digitorum longus (EDL). Adult male mice C57BL/N6 were flown aboard the BION-M1 biosatellite for 30 days on orbit (BF) or housed in a replicate flight habitat on Earth (BG) as reference flight control. In this study we investigated for the first time gene expression adaptation to 30 days of microgravity exposure in mouse soleus and EDL highlighting potential new targets for improvement of countermeasures able to ameliorate or even prevent microgravity-induced atrophy in future spaceflights. Overall Design: C57BL/N6 mice were randomly divided in 3 groups: Bion Flown (BF) mice flown aboard the Bion M1 biosatellite in microgravity environment for 30 days; Bion Ground (BG) mice housed in the same habitat of flown animals but exposed to earth gravity; and Flight Control (FC) mice housed in a standard animal facility.
- API
Experimental and Analytical Development of a Health Management System for Electro-Mechanical Actuators
data.nasa.gov | Last Updated 2020-01-29T01:49:29.000ZExpanded deployment of Electro-Mechanical Actuators (EMAs) in critical applications has created much interest in EMA Prognostic Health Management (PHM), a key enabling technology of Condition Based Maintenance (CBM). As such, Impact Technologies, LLC is collaborating with the NASA Ames Research Center to perform a number of research efforts in support of NASA’s Integrated Vehicle Health Management (IVHM) initiatives. These efforts have combined experimental test stand development, laboratory seeded fault testing, and physical model-based health monitoring in a comprehensive PHM system development strategy. This paper discusses two closely related EMA research programs being conducted by Impact and NASA Ames. The first of these efforts resulted in the creation of an electro-mechanical actuator test stand for the Prognostics Center of Excellence at the NASA Ames Research Center. The second effort is ongoing and is utilizing physics-based modeling techniques to develop an algorithm and software package toolset for PHM of aircraft EMA systems using a hybrid (virtual sensor) approach.
- API
Airborne Electro-Mechanical Actuator Test Stand for Development of Prognostic Health Management Systems
data.nasa.gov | Last Updated 2020-01-29T04:05:01.000ZWith the advent of the next generation of aerospace systems equipped with fly-by-wire controls, electro- mechanical actuators (EMA) are quickly becoming components critical to safety of aerospace vehicles. Being relatively new to the field, however, EMA lack the knowledge base compared to what is accumulated for the more traditional actuator types, especially when it comes to fault detection and prognosis. Scarcity of health monitoring data from fielded systems and prohibitive costs of carrying out real flight tests create the need to build high-fidelity system models and design affordable yet realistic experimental setups. The objective of this work is to build an EMA test stand that, unlike current laboratory stands typically weighing in excess of one metric ton, is portable enough to be easily placed aboard a wide variety of aircraft. This stand, named the FLEA (for Flyable Electro- mechanical Actuator test stand), allows testing EMA fault detection and prognosis technologies in flight environment, thus substantially increasing their technology readiness level – all without the expense of dedicated flights, as the stand is designed to function as a non-intrusive secondary payload. No aircraft modifications are required and data can be collected during any available flight opportunity: pilot currency flights, ferry flights, or flights dedicated to other experiments. The stand is currently equipped with a prototype version of NASA Ames developed prognostic health management system with models aimed at detecting and tracking several fault types. At this point the team has completed test flights of the stand on US Air Force C-17 aircraft and US Army UH-60 helicopters and more experiments, both laboratory and airborne, are planned for the coming months.
- API
Rapid Electrochemical Detection and Identification of Microbiological and Chemical Contaminants for Manned Spaceflight Project
data.nasa.gov | Last Updated 2020-01-29T03:33:53.000Z<p>A great deal of effort has gone into the development of point-of-use methods to meet the challenge of rapid bacterial identification for both environmental monitoring and clinical applications.&nbsp; Unfortunately, most of the methods developed rely on Preliminary Chain Reaction (PCR) and face inherent limitations because of the requirement for enzymatic components and thermal control.&nbsp; Other methods based on surface plasmon resonance, quartz crystal microbalance, and fluorescence has been reported with good detection limits, but, these methods are immunological and cannot provide genetic-level information.&nbsp; Further, they require labeled markers, complicated fluid handling systems, and sensitive optics that drive up cost and complexity and preclude them from outside the laboratory.&nbsp; Recent work by a group at the University of Toronto has focused on developing an electrochemical platform that combines ultrasensitive detection, straightforward sample processing, and inexpensive components to create a cost-effective, user-friendly device for detection and identification of microorganisms.&nbsp; The platform combines an electrical cell lysis chamber, and electrochemical reporter system, and nanostructured microelectrodes (NMEs) to detect specific nucleic acid sequences.&nbsp; The nucleic acid sequences are unique to a given type of microorganism and can be used to identify the microorganisms present in a sample.</p><p>From the perspective of the anticipated prototype device &nbsp;(Lam, et al. 2012. <em>Polymerase Chain Reaction-Free, Sample-to-Answer Bacterial Detection in 30 Minutes with Integrated Cell Lysis</em>. Anal. Chem. <strong>84(1)</strong>: 21-5), detection of microbial contaminants will begin with a lysis chamber designed to release DNA and RNA from microorganisms present in the sample using ultrasonic or electrochemical technology.&nbsp; The DNA and RNA mixture is then passed into an analysis chamber containing an array of nanostructured microelectrodes (NMEs).&nbsp; The surface of the NMEs will be functionalized with probe molecules for DNA or RNA sequences specific to the bacteria being targeted.&nbsp; Binding of the DNA or RNA to the appropriate detection probe on the NME surface in the presence of an electrochemical reporter system will change the electrochemical properties of the NMEs.&nbsp; A potentiostat is used to measure the current at each individual electrode before and after addition of the DNA and RNA mixture.&nbsp; The difference in current before and after addition of the mixture to the NMEs is compared against a pre-determined threshold to check for the presence of target bacteria in the sample.&nbsp; The process for detection of chemical contaminants is very similar.&nbsp; The lysis chamber would be bypassed and the sample would flow directly into the analysis chamber.&nbsp; The NMEs will be functionalized with molecules to selectively bind the desired targets (analytes) and the change in the electrochemical response of each NME can again be used to detect and quantify the contaminants.&nbsp; Depending on the analyte of interest, it may be possible to directly measure analyte binding on the surface of the NMEs without the use of an electrochemical reporter system. The overall project will focus on optimization of the individual aspects of the detection platform in preparation for construction of a prototype for a flight experiment.&nbsp; The scope of the work in this proposal is limited to characterization and optimization of the lysis step/sample preparation, probe selection, and NME structure.&nbsp; Lysis conditions will be optimized by evaluating parameters associated with the oscillation frequency and lysis time for ultrasonic techniques and applied voltage for the electrochemical techniques.&nbsp; Cell viability, as determined by fluorescent detection of DNA or R
- API
2002 Environmental Sustainability Index (ESI)
data.nasa.gov | Last Updated 2022-01-17T05:02:16.000ZThe 2002 Environmental Sustainability Index (ESI) measures overall progress toward environmental sustainability for 142 countries based on environmental systems, stresses, human vulnerability, social and institutional capacity and global stewardship. The addition of a climate change indicator, reduction in number of capacity indicators, and an improved imputation methodology contributed to an improvement from the 2001 ESI. The index was unveiled at the World Economic Forum's annual meeting, January 2002, New York. The 2002 ESI is the result of collaboration among the World Economic Forum (WEF), Yale Center for Environmental Law and Policy (YCELP), and the Columbia University Center for International Earth Science Information Network (CIESIN).