- API
Nano Dust Analyzer Project
data.nasa.gov | Last Updated 2020-01-29T04:54:41.000Z<p> We propose to develop a new highly sensitive instrument to confirm the existence of the so-called nano-dust particles, characterize their impact parameters, and measure their chemical composition. Simultaneous theoretical studies will be used to derive the expected&nbsp; mass and velocity ranges of these putative particles to formulate science and measurement requirements for the future deployment of&nbsp; the proposed Nano-Dust Analyzer (NDA)&nbsp;</p> <p> Early dust instruments onboard Pioneer 8 and 9 and Helios spacecraft detected a flow of submicron sized dust particles coming from the direction of the Sun. These particles originate in the inner solar system from mutual collisions among meteoroids and move on&nbsp; hyperbolic orbits that leave the Solar System under the prevailing radiation pressure force. Later dust instruments with higher&nbsp; sensitivity had to avoid looking toward the Sun because of interference from the solar wind and UV radiation and thus contributed&nbsp; little to the characterization of the dust stream. The one exception is the Ulysses dust detector that observed escaping dust particles&nbsp; high above the solar poles, which confirm the suspicion that charged nanometer sized dust grains are carried to high heliographic&nbsp; latitudes by electromagnetic interactions with the Interplanetary Magnetic Field (IMF). Recently, the STEREO WAVES instruments&nbsp; recorded a large number of intense electric field signals, which were interpreted as impacts from nanometer sized particles striking the&nbsp; spacecraft with velocities of about the solar wind speed. This high flux and strong spatial and/or temporal variations of nanometer&nbsp; sized dust grains at low latitude appears to be uncorrelated with the solar wind properties. This is a mystery as it would require that&nbsp; the total collisional meteoroid debris inside 1 AU is cast in nanometer sized fragments. The observed fluxes of inner-source pickup ions&nbsp; also point to the existence of a much enhanced dust population in the nanometer size range.&nbsp;</p> <p> This new heliospherical phenomenon of nano-dust streams may have consequences throughout the planetary system, but as of yet no dust instrument exists that could be used to shed light on their properties. &nbsp;We propose to develop a dust analyzer capable to detect and&nbsp; analyze these mysterious dust particles coming from the solar direction and to embark upon complementary theoretical studies to&nbsp; understand their characteristics. The instrument is based on the Cassini Dust Analyzer (CDA) that has analyzed the composition of&nbsp; nanometer sized dust particles emanating from the Jovian and Saturnian systems but could not be pointed towards the Sun. By&nbsp; applying technologies implemented in solar wind instruments and coronagraphs a highly sensitive dust analyzer will be developed and&nbsp; tested in the laboratory. The dust analyzer shall be able to characterize impact properties (impact charge and energy distribution of&nbsp; ions from which mass and speed of the impacting grains may be derived) and chemical composition of individual nanometer sized&nbsp; particles while exposed to solar wind and UV radiation. The measurements will enable us to identify the source of the dust by&nbsp; comparing their elemental composition with that of larger micrometeoroid particles of cometary and asteroid origin and will reveal&nbsp; interaction of nano-dust with the interplanetary medium by investigating the relation of the dust flux with solar wind and IMF&nbsp; properties.&nbsp;</p> <p> Complementary theoretically studies will be performed to understand the characteristics of nano-dust particles at 1 AU to answer the&nbsp; following questions:&nbsp; - What is the speed range at which nanometer sized particles impact
- API
Global Navigation Satellite System (GNSS) Rapid Clock Product (30 second resolution, daily files, generated daily) from NASA CDDIS
data.nasa.gov | Last Updated 2023-02-28T19:25:38.000ZThis derived product set consists of Global Navigation Satellite System Rapid Satellite and Receiver Clock Product (30-second granularity, daily files, generated daily) from the NASA Crustal Dynamics Data Information System (CDDIS). GNSS provide autonomous geo-spatial positioning with global coverage. GNSS data sets from ground receivers at the CDDIS consist primarily of the data from the U.S. Global Positioning System (GPS) and the Russian GLObal NAvigation Satellite System (GLONASS). Since 2011, the CDDIS GNSS archive includes data from other GNSS (Europe’s Galileo, China’s Beidou, Japan’s Quasi-Zenith Satellite System/QZSS, the Indian Regional Navigation Satellite System/IRNSS, and worldwide Satellite Based Augmentation Systems/SBASs), which are similar to the U.S. GPS in terms of the satellite constellation, orbits, and signal structure. Analysis Centers (ACs) of the International GNSS Service (IGS) retrieve GNSS data on regular schedules to produce GNSS satellite and ground receiver clock values. The IGS Analysis Center Coordinator (ACC) uses these individual AC solutions to generate the official IGS rapid combined satellite and receiver clock products. The rapid combination is a daily solution available approximately 17 hours after the end of the previous UTC day. All satellite and receiver clock solution files utilize the clock RINEX format and span 24 hours from 00:00 to 23:45 UTC. For most applications the user of IGS products will not notice any significant differences between results obtained using the IGS Final and the IGS Rapid products.
- API
Global Navigation Satellite System (GNSS) IGS Clock Combination Product from Real-Time AC Submissions from NASA CDDIS
data.nasa.gov | Last Updated 2022-01-17T05:22:33.000ZThis derived product set consists of Global Navigation Satellite System satellite and receiver clock combination product (30-second granularity, daily files, generated daily) from the real-time IGS analysis center submissions available from NASA Crustal Dynamics Data Information System (CDDIS). GNSS provide autonomous geo-spatial positioning with global coverage. GNSS data sets from ground receivers at the CDDIS consist primarily of the data from the U.S. Global Positioning System (GPS) and the Russian GLObal NAvigation Satellite System (GLONASS). Since 2011, the CDDIS GNSS archive includes data from other GNSS (Europe’s Galileo, China’s Beidou, Japan’s Quasi-Zenith Satellite System/QZSS, the Indian Regional Navigation Satellite System/IRNSS, and worldwide Satellite Based Augmentation Systems/SBASs), which are similar to the U.S. GPS in terms of the satellite constellation, orbits, and signal structure. The CDDIS provides access to products generated from real-time data streams in support of the IGS Real-Time Service. The real-time observation data from a global permanent network of ground-based receivers are transmitted from the CDDIS in 1 to multi-second intervals in raw receiver or RTCM (Radio Technical Commission for Maritime Services) format. These real-time data are utilized to generate near real-time product streams. The real-time products consist of GNSS satellite orbit and clock corrections to the broadcast ephemeris. These correction streams are formatted according to the RTCM SSR standard for State Space Representation and are broadcast using the NTRIP protocol. IGS analysis centers (ACs) access GNSS real-time data streams to produce GNSS satellite and ground receiver clock values in real-time. The product streams are combination solutions generated by processing individual real-time solutions from participating IGS Real-time ACs. The IGS Real-Time Analysis Center Coordinator (RTACC) uses these individual AC solutions to generate this real-time IGS combined satellite and receiver clock product. The effect of combining the different AC solutions is a more reliable and stable performance than that of any single AC's product. This clock solution is a batch combination based on daily clock submissions by these IGS real-time analysis centers and have been provided since February 2009, shortly after real-time streams were routinely available through the IGS Real-Time Pilot Project and prior to the availability of real-time product streams. Clock solution files consist of decoded clock results from the real time stream at 30-second intervals. This combination is a daily solution available approximately one to three days after the end of the previous UTC day. All satellite and receiver clock solution files utilize the clock RINEX format and span 24 hours from 00:00 to 23:45 UTC.
- API
India Annual Winter Cropped Area, 2001-2016
data.nasa.gov | Last Updated 2022-01-17T05:29:43.000ZThe India Annual Winter Cropped Area, 2001 - 2016 consists of annual winter cropped areas for most of India (except the Northeastern states) from 2000-2001 to 2015-2016. This data set utilizes the NASA Moderate Resolution Imaging Spectroradiometer (MODIS) Enhanced Vegetation Index (EVI; spatial resolution: 250m) for the winter growing season (October-March). The methodology uses an automated algorithm identifying the EVI peak in each pixel for each year and linearly scales the EVI value between 0% and 100% cropped area within that particular pixel. Maps were then resampled to 1 km and were validated using high-resolution QuickBird, RapidEye, SkySat, and WorldView-2 images spanning 2008 to 2016 across 11 different agricultural regions of India. The spatial resolution of the data set is 1 km, resampled from 250m. The data are distributed as GeoTIFF and NetCDF files and are in WGS 84 projection.
- API
Global Navigation Satellite System (GNSS) Final Clock Product (30 second resolution, daily files, generated weekly) from NASA CDDIS
data.nasa.gov | Last Updated 2023-02-28T19:25:26.000ZThis derived product set consists of Global Navigation Satellite System Final Satellite and Receiver Clock Product (30-second granularity, daily files, generated weekly) from the NASA Crustal Dynamics Data Information System (CDDIS). GNSS provide autonomous geo-spatial positioning with global coverage. GNSS data sets from ground receivers at the CDDIS consist primarily of the data from the U.S. Global Positioning System (GPS) and the Russian GLObal NAvigation Satellite System (GLONASS). Since 2011, the CDDIS GNSS archive includes data from other GNSS (Europe’s Galileo, China’s Beidou, Japan’s Quasi-Zenith Satellite System/QZSS, the Indian Regional Navigation Satellite System/IRNSS, and worldwide Satellite Based Augmentation Systems/SBASs), which are similar to the U.S. GPS in terms of the satellite constellation, orbits, and signal structure. Analysis Centers (ACs) of the International GNSS Service (IGS) retrieve GNSS data on regular schedules to produce GNSS satellite and ground receiver clock values. The IGS Analysis Center Coordinator (ACC) uses these individual AC solutions to generate the official IGS final combined satellite and receiver clock products. The final products are considered the most consistent and highest quality IGS solutions; they consist of daily orbit files, generated on a weekly basis with a delay up to 13 (for the last day of the week) to 20 (for the first day of the week) days. All satellite and receiver clock solution files utilize the clock RINEX format and span 24 hours from 00:00 to 23:45 UTC.
- API
Global gene expression analysis highlights microgravity sensitive key genes in soleus and EDL of 30 days space flown mice
data.nasa.gov | Last Updated 2023-01-26T18:49:58.000ZMicrogravity exposure as well as chronic muscle disuse are two of the main causes of physiological adaptive skeletal muscle atrophy in humans and murine animals in physiological condition. The aim of this study was to investigate at both morphological and global gene expression level skeletal muscle adaptation to microgravity in mouse soleus and extensor digitorum longus (EDL). Adult male mice C57BL/N6 were flown aboard the BION-M1 biosatellite for 30 days on orbit (BF) or housed in a replicate flight habitat on Earth (BG) as reference flight control. In this study we investigated for the first time gene expression adaptation to 30 days of microgravity exposure in mouse soleus and EDL highlighting potential new targets for improvement of countermeasures able to ameliorate or even prevent microgravity-induced atrophy in future spaceflights. Overall Design: C57BL/N6 mice were randomly divided in 3 groups: Bion Flown (BF) mice flown aboard the Bion M1 biosatellite in microgravity environment for 30 days; Bion Ground (BG) mice housed in the same habitat of flown animals but exposed to earth gravity; and Flight Control (FC) mice housed in a standard animal facility.
- API
Metrics for Evaluating Performance of Prognostic Techniques
data.nasa.gov | Last Updated 2020-01-29T03:23:28.000ZPrognostics is an emerging concept in condition basedmaintenance(CBM)ofcriticalsystems.Alongwith developing the fundamentals of being able to confidently predict Remaining Useful Life (RUL), the technology calls for fielded applications as it inches towards maturation. This requires a stringent performance evaluation so that the significance of the concept can be fully exploited. Currently, prognostics concepts lack standard definitions and suffer from ambiguous and inconsistent interpretations. This lack of standards is in part due to the varied end-user requirements for different applications, time scales, available information, domain dynamics, etc. to name a few issues. Instead, the research community has used a variety of metrics based largely on convenience with respect to their respective requirements. Very little attention has been focused on establishing a common ground to compare different efforts. This paper surveys the metrics that are already used for prognostics in a variety of domains including medicine, nuclear, automotive, aerospace, and electronics. It also considers other domains that involve prediction-related tasks, such as weather and finance. Differences and similarities between these domains and health maintenancehave been analyzed to help understand what performance evaluation methods may or may not be borrowed. Further, these metrics have been categorized in several ways that may be useful in deciding upon a suitable subset for a specific application. Some important prognostic concepts have been defined using a notational framework that enables interpretation of different metrics coherently. Last, but not the least, a list of metrics has been suggested to assess critical aspects of RUL predictions before they are fielded in real applications.
- API
GPM Ground Validation SEA FLUX ICE POP V1
data.nasa.gov | Last Updated 2022-06-07T06:12:15.000ZThe GPM Ground Validation SEA FLUX ICE POP dataset includes estimates of ocean surface latent and sensible heat fluxes, 10m wind speed, 10m air temperature, 10m air humidity, and skin sea surface temperature in support of the International Collaborative Experiments for Pyeongchang 2018 Olympic and Paralympic Winter Games (ICE-POP) field campaign in South Korea. The two major objectives of ICE-POP were to study severe winter weather events in regions of complex terrain and improve the short-term forecasting of such events. These data contributed to the Global Precipitation Measurement mission Ground Validation (GPM GV) campaign efforts to improve satellite estimates of orographic winter precipitation. This data file is available in netCDF-4 format from September 1, 2017 through April 30, 2018.
- API
OWLETS-1 Ozonesonde Data
data.nasa.gov | Last Updated 2022-07-18T13:04:47.000ZOWLETS1_Sondes_Data_1 is the Ozone Water-Land Environmental Transition Study (OWLETS-1) ozone data collected via synchronous ozonesonde launches at the NASA Langley Research Center ground site and Chesapeake Bay Bridge Tunnel site during the OWLETS field campaign. OWLETS was supported by the NASA Science Innovation Fund (SIF). Data collection is complete. Coastal regions have typically posed a challenge for air quality researchers due to a lack of measurements available over water and water-land boundary transitions. Supported by NASA’s Science Innovation Fund (SIF), the Ozone Water-Land Environmental Transition Study (OWLETS) field campaign examined ozone concentrations and gradients over the Chesapeake Bay from July 5, 2017 – August 3, 2017, with twelve intensive measurement days occurring during this time period. OWLETS utilized a unique combination of instrumentation, including aircraft, TOLNet ozone lidars (NASA Goddard Space Flight Center Tropospheric Ozone Differential Absorption Lidar and NASA Langley Research Center Mobile Ozone Lidar), UAV/drones, ozonesondes, AERONET sun photometers, and mobile and ship-based measurements, to characterize the land-water differences in ozone and other pollutants. Two main research sites were established as part of the campaign: an over-land site at NASA LaRC, and an over-water site at the Chesapeake Bay Bridge Tunnel. These two research sites were established to provide synchronous vertical measurements of meteorology and pollutants over water and over land. In combination with mobile observations between the two sites, pollutant gradients were able to be observed and used to better understand the fundamental processes occurring at the land-water interface. OWLETS-2 was completed from June 6, 2018 – July 6, 2018 in the upper Chesapeake Bay region. Research sites were established at the University of Maryland, Baltimore County (UMBC), Hart Miller Island (HMI), and Howard University Beltsville (HUBV), with HMI representing the over-water location and UMBC and HUBV representing the over-land sites. Similar measurements were carried out to further characterize water-land gradients in the upper Chesapeake Bay. The measurements completed during OWLETS are of importance in enhancing air quality models, and improving future satellite retrievals, particularly, NASA’s Tropospheric Emissions: Monitoring of Pollution, which is scheduled to launch in 2022.
- API
Global Navigation Satellite System (GNSS) Rapid Orbit/Clock/ERP Product Summary from NASA CDDIS
data.nasa.gov | Last Updated 2023-03-01T00:51:24.000ZThis derived product set consists of Global Navigation Satellite System Rapid Orbit/Reference Frame Product Summary from the NASA Crustal Dynamics Data Information System (CDDIS). GNSS provide autonomous geo-spatial positioning with global coverage. GNSS data sets from ground receivers at the CDDIS consist primarily of the data from the U.S. Global Positioning System (GPS) and the Russian GLObal NAvigation Satellite System (GLONASS). Since 2011, the CDDIS GNSS archive includes data from other GNSS (Europe’s Galileo, China’s Beidou, Japan’s Quasi-Zenith Satellite System/QZSS, the Indian Regional Navigation Satellite System/IRNSS, and worldwide Satellite Based Augmentation Systems/SBASs), which are similar to the U.S. GPS in terms of the satellite constellation, orbits, and signal structure. Analysis Centers (ACs) of the International GNSS Service (IGS) retrieve GNSS data on regular schedules to produce GNSS satellite and ground receiver clock values. The IGS Analysis Center Coordinator (ACC) uses these individual AC solutions to generate the official IGS rapid combined orbit, satellite and receiver clock, and ERP products. The rapid combination is a daily solution available approximately 17 hours after the end of the previous UTC day. All satellite and receiver clock solution files utilize the clock RINEX format and span 24 hours from 00:00 to 23:45 UTC. The solution summary file details information about the generation of the daily rapid products.