- API
Global Navigation Satellite System (GNSS) IGS Clock Combination Product from Real-Time AC Submissions from NASA CDDIS
data.nasa.gov | Last Updated 2022-01-17T05:22:33.000ZThis derived product set consists of Global Navigation Satellite System satellite and receiver clock combination product (30-second granularity, daily files, generated daily) from the real-time IGS analysis center submissions available from NASA Crustal Dynamics Data Information System (CDDIS). GNSS provide autonomous geo-spatial positioning with global coverage. GNSS data sets from ground receivers at the CDDIS consist primarily of the data from the U.S. Global Positioning System (GPS) and the Russian GLObal NAvigation Satellite System (GLONASS). Since 2011, the CDDIS GNSS archive includes data from other GNSS (Europe’s Galileo, China’s Beidou, Japan’s Quasi-Zenith Satellite System/QZSS, the Indian Regional Navigation Satellite System/IRNSS, and worldwide Satellite Based Augmentation Systems/SBASs), which are similar to the U.S. GPS in terms of the satellite constellation, orbits, and signal structure. The CDDIS provides access to products generated from real-time data streams in support of the IGS Real-Time Service. The real-time observation data from a global permanent network of ground-based receivers are transmitted from the CDDIS in 1 to multi-second intervals in raw receiver or RTCM (Radio Technical Commission for Maritime Services) format. These real-time data are utilized to generate near real-time product streams. The real-time products consist of GNSS satellite orbit and clock corrections to the broadcast ephemeris. These correction streams are formatted according to the RTCM SSR standard for State Space Representation and are broadcast using the NTRIP protocol. IGS analysis centers (ACs) access GNSS real-time data streams to produce GNSS satellite and ground receiver clock values in real-time. The product streams are combination solutions generated by processing individual real-time solutions from participating IGS Real-time ACs. The IGS Real-Time Analysis Center Coordinator (RTACC) uses these individual AC solutions to generate this real-time IGS combined satellite and receiver clock product. The effect of combining the different AC solutions is a more reliable and stable performance than that of any single AC's product. This clock solution is a batch combination based on daily clock submissions by these IGS real-time analysis centers and have been provided since February 2009, shortly after real-time streams were routinely available through the IGS Real-Time Pilot Project and prior to the availability of real-time product streams. Clock solution files consist of decoded clock results from the real time stream at 30-second intervals. This combination is a daily solution available approximately one to three days after the end of the previous UTC day. All satellite and receiver clock solution files utilize the clock RINEX format and span 24 hours from 00:00 to 23:45 UTC.
- API
SBUV2/NOAA-17 Ozone (O3) Profile and Total Column Ozone 1 Month Zonal Mean L3 Global 5.0 degree Latitude Zones V1 (SBUV2N17L3zm) at GES DISC
data.nasa.gov | Last Updated 2022-01-17T05:51:02.000ZThe Solar Backscattered Ultraviolet (SBUV) from NOAA-17 Level-3 monthly zonal mean (MZM) product (SBUV2N17L3zm) is derived from the Level-2 retrieved ozone profiles. Ozone retrievals are generated from the v8.6 SBUV algorithm. A Level-3 MZM file computes zonal means covering 5 degree latitude bands for each calendar month. For this product there are 126 months of data from August 2002 through January 2013. There are a total of 36 latitudinal bands, 18 in each hemisphere. Profile data are provided at 21 layers from 1013.25, 639.318, 403.382,254.517, 160.589, 101.325,63.9317, 40.3382, 25.4517, 16.0589, 10.1325, 6.39317,4.03382, 2.54517, 1.60589, 1.01325,0.639317, 0.403382, 0.254517, 0.160589 and 0.101325 hPa (measured at bottom of layer). NOTE: Some profiles have 20 layers and do not report the top most layer. Mixing ratios are reported at 15 layers from 0.5, 0.7, 1.0, 1.5, 2.0, 3.0, 4.0, 5.0, 7.0, 10.0, 15.0, 20.0, 30.0, 40.0 and 50.0 hPa (measured at middle of layer). The MZM product averages retrievals that meet the criteria for a good retrieval as determined by error flags in the Level 2 data. A good retrieval is defined as satisfying the following conditions: 1) Profile Error Flag = 0 or 1 (0 = good retrieval; 1 = solar zenith angle > 84 degrees). 2) Total Error Flags = 0, 1, 2 or 5 (0 = good retrieval; 1 = not used; 2 = solar zenith angle > 84 degrees; large discrepancy between profile total and best total ozone). NOTE - Total error flag = 5 is anomalously applied at high latitudes and high solar zenith angles where the B-Pair total ozone estimate is not as reliable as the ozone profile under these conditions. This error flag may be removed in future version of algorithm. The zonal means computed for each month are screened according to the following statistical criteria: 1) Number of good retrievals for the month greater than or equal to 2/3 of the samples for a nominal month. 2) Mean latitude of good retrievals less than or equal to 1 degree from center of latitude band. 3) Mean time of good retrievals less than or equal to 4 days from center of month (i.e., day = 15).
- API
LIS 0.1 DEGREE VERY HIGH RESOLUTION GRIDDED LIGHTNING MONTHLY CLIMATOLOGY (VHRMC) V1
data.nasa.gov | Last Updated 2022-05-03T14:29:10.000ZThe LIS 0.1 Degree Very High Resolution Gridded Lightning Monthly Climatology (VHRMC) dataset consists of gridded monthly climatologies of total lightning flash rates seen by the Lightning Imaging Sensor (LIS) from January 1, 1998 through December 31, 2013. LIS is an instrument on the Tropical Rainfall Measurement Mission satellite (TRMM) used to detect the distribution and variability of total lightning occurring in the Earth's tropical and subtropical regions. This information can be used for severe storm detection and analysis, and also for lightning-atmosphere interaction studies. The gridded climatologies include annual mean flash rate, mean diurnal cycle of flash rate with 24 hour resolution, and mean annual cycle of flash rate with daily, monthly, or seasonal resolution. All datasets are in 0.1 degree spatial resolution. The mean annual cycle of flash rate datasets (i.e., daily, monthly or seasonal) have both 49-day and 1 degree boxcar moving averages to remove diurnal cycle and smooth regions with low flash rate, making the results more robust.
- API
Bio-optical properties of the different water masses in the Gulf of St. Lawrence
data.nasa.gov | Last Updated 2023-04-17T13:03:21.000ZThe St. Lawrence ecosystem is a complex environment influenced by a variety of physical forces (runoff, winds, tides, bathymetry) that sustains a diverse food web going from phytoplankton to whales. Chlorophyll concentration is thus an important variable to measure at the scale of the ecosystem. Because of its large size, remote sensing is the only available tool to measure chlorophyll distribution in the St. Lawrence using ocean color imagery. To fully utilize this type of data, it is however important to have a sound knowledge of the bio-optical properties of the different water masses in the system. A St. Lawrence SeaWiFS program was thus built to gather this knowledge beginning in 1997.
- API
TES/Aura L3 Water Vapor Monthly Gridded V006
data.nasa.gov | Last Updated 2022-01-17T05:58:53.000ZTL3H2OM_6 is the Tropospheric Emission Spectrometer (TES)/Aura Level 3 Water Vapor Monthly Gridded Version 6 data product. TES was an instrument aboard NASA's Aura satellite and was launched from California on July 15, 2004. Data collection for TES is complete. This data product consists of monthly atmospheric temperature and volume mixing ratios (VMRs) for the Water Vapor atmospheric species, which are provided at 2 degree latitude X 4 degree longitude spatial grids and at a subset of TES standard pressure levels. The TES Science Data Processing L3 subsystem interpolated L2 atmospheric profiles collected in a Global Survey onto a global grid uniform in latitude and longitude to provide a 3-D representation of the distribution of atmospheric gasses. Daily and monthly averages of L2 profiles and browse images are available. The L3 standard data products are composed of L3 HDF-EOS grid data. A separate product file was produced for each different atmospheric species. TES obtained data in two basic observation modes: Limb or Nadir; Nadir observations, which point directly to the surface of the Earth, are different from limb observations, which are pointed at various off-nadir angles into the atmosphere. The product file may contain, in separate folders, limb data, nadir data, or both folders may be present. Specific to L3 processing were the terms Daily and Monthly representing the approximate time coverage of the L3 products. However, the input data granules to the L3 process are complete Global Surveys; in other words a Global Survey was not split in relation to time when input to the L3 processes even if they exceed the usual understood meanings of a day or month. More specifically, Daily L3 products represented a single Global Survey (approximately 26 hours) and Monthly L3 products represent Global Surveys that are initiated within that calendar month. The data granules defined for L3 standard products were daily and monthly.
- API
PHOENIX MARS ROBOTIC ARM CAMERA 5 NORMAL OPS V1.0
data.nasa.gov | Last Updated 2023-01-26T20:52:37.000ZThe Robotic Arm Camera (RAC) experiment on the Mars Phoenix Lander consists of one instrument component plus command electronics. This RAC Imaging Operations RDR data set contains normal data from the Robotic Arm Camera (RAC).
- API
PHOENIX MARS ROBOTIC ARM CAMERA 5 XYZ OPS V1.0
data.nasa.gov | Last Updated 2023-01-26T20:09:16.000ZThe Robotic Arm Camera (RAC) experiment on the Mars Phoenix Lander consists of one instrument component plus command electronics. This RAC Imaging Operations RDR data set contains xyz data from the Robotic Arm Camera (RAC).
- API
TES/Aura L3 Ozone Daily Gridded V006
data.nasa.gov | Last Updated 2022-01-17T05:58:51.000ZTL3O3D_6 is the Tropospheric Emission Spectrometer (TES)/Aura L3 Ozone Daily Gridded Version 6 data product. TES was an instrument aboard NASA's Aura satellite and was launched from California on July 15, 2004. Data collection for TES is complete. This data product consists of daily atmospheric temperature and volume mixing ratio (VMR) for the atmospheric species, which were provided at 2 degree latitude by 4 degree longitude spatial grids and at a subset of TES standard pressure levels. The TES Science Data Processing L3 subsystem interpolated the L2 atmospheric profiles collected in a Global Survey onto a global grid uniform in latitude and longitude to provide a 3-D representation of the distribution of atmospheric gasses. Daily and monthly averages of L2 profiles and browse images are available. The L3 standard data products were composed of L3 HDF-EOS grid data. A separate product file is produced for each different atmospheric species. TES obtains data in two basic observation modes: Limb or Nadir. The product file may have contained, in separate folders, limb data, nadir data, or both folders may be present. Specific to L3 processing are the terms Daily and Monthly representing the approximate time coverage of the L3 products. However, the input data granules to the L3 process are completed Global Surveys; in other words a Global Survey was not split in relation to time when input to the L3 processes even if they exceeded the usual understood meanings of a day or month. More specifically, Daily L3 products represented a single Global Survey (approximately 26 hours) and Monthly L3 products represented Global Surveys that were initiated within that calendar month. The data granules defined for L3 standard products were daily and monthly. Details of the format of this product can be found in the TES Data Products Specifications (DPS).
- API
SBUV2/NOAA-16 Ozone (O3) Profile and Total Column Ozone 1 Month Zonal Mean L3 Global 5.0 degree Latitude Zones V1 (SBUV2N16L3zm) at GES DISC
data.nasa.gov | Last Updated 2022-01-17T05:51:01.000ZThe Solar Backscattered Ultraviolet (SBUV) from NOAA-16 Level-3 monthly zonal mean (MZM) product (SBUV2N16L3zm) is derived from the Level-2 retrieved ozone profiles. Ozone retrievals are generated from the v8.6 SBUV algorithm. A Level-3 MZM file computes zonal means covering 5 degree latitude bands for each calendar month. For this product there are 154 months of data from October 2000 through July 2013. There are a total of 36 latitudinal bands, 18 in each hemisphere. Profile data are provided at 21 layers from 1013.25, 639.318, 403.382,254.517, 160.589, 101.325,63.9317, 40.3382, 25.4517, 16.0589, 10.1325, 6.39317,4.03382, 2.54517, 1.60589, 1.01325,0.639317, 0.403382, 0.254517, 0.160589 and 0.101325 hPa (measured at bottom of layer). NOTE: Some profiles have 20 layers and do not report the top most layer. Mixing ratios are reported at 15 layers from 0.5, 0.7, 1.0, 1.5, 2.0, 3.0, 4.0, 5.0, 7.0, 10.0, 15.0, 20.0, 30.0, 40.0 and 50.0 hPa (measured at middle of layer). The MZM product averages retrievals that meet the criteria for a good retrieval as determined by error flags in the Level 2 data. A good retrieval is defined as satisfying the following conditions: 1) Profile Error Flag = 0 or 1 (0 = good retrieval; 1 = solar zenith angle > 84 degrees). 2) Total Error Flags = 0, 1, 2 or 5 (0 = good retrieval; 1 = not used; 2 = solar zenith angle > 84 degrees; large discrepancy between profile total and best total ozone). NOTE - Total error flag = 5 is anomalously applied at high latitudes and high solar zenith angles where the B-Pair total ozone estimate is not as reliable as the ozone profile under these conditions. This error flag may be removed in future version of algorithm. The zonal means computed for each month are screened according to the following statistical criteria: 1) Number of good retrievals for the month greater than or equal to 2/3 of the samples for a nominal month. 2) Mean latitude of good retrievals less than or equal to 1 degree from center of latitude band. 3) Mean time of good retrievals less than or equal to 4 days from center of month (i.e., day = 15).
- API
Global Navigation Satellite System (GNSS) Rapid Clock Product (30 second resolution, daily files, generated daily) from NASA CDDIS
data.nasa.gov | Last Updated 2023-02-28T19:25:38.000ZThis derived product set consists of Global Navigation Satellite System Rapid Satellite and Receiver Clock Product (30-second granularity, daily files, generated daily) from the NASA Crustal Dynamics Data Information System (CDDIS). GNSS provide autonomous geo-spatial positioning with global coverage. GNSS data sets from ground receivers at the CDDIS consist primarily of the data from the U.S. Global Positioning System (GPS) and the Russian GLObal NAvigation Satellite System (GLONASS). Since 2011, the CDDIS GNSS archive includes data from other GNSS (Europe’s Galileo, China’s Beidou, Japan’s Quasi-Zenith Satellite System/QZSS, the Indian Regional Navigation Satellite System/IRNSS, and worldwide Satellite Based Augmentation Systems/SBASs), which are similar to the U.S. GPS in terms of the satellite constellation, orbits, and signal structure. Analysis Centers (ACs) of the International GNSS Service (IGS) retrieve GNSS data on regular schedules to produce GNSS satellite and ground receiver clock values. The IGS Analysis Center Coordinator (ACC) uses these individual AC solutions to generate the official IGS rapid combined satellite and receiver clock products. The rapid combination is a daily solution available approximately 17 hours after the end of the previous UTC day. All satellite and receiver clock solution files utilize the clock RINEX format and span 24 hours from 00:00 to 23:45 UTC. For most applications the user of IGS products will not notice any significant differences between results obtained using the IGS Final and the IGS Rapid products.