- API
SBUV2/NOAA-17 Ozone (O3) Profile and Total Column Ozone 1 Month Zonal Mean L3 Global 5.0 degree Latitude Zones V1 (SBUV2N17L3zm) at GES DISC
data.nasa.gov | Last Updated 2022-01-17T05:51:02.000ZThe Solar Backscattered Ultraviolet (SBUV) from NOAA-17 Level-3 monthly zonal mean (MZM) product (SBUV2N17L3zm) is derived from the Level-2 retrieved ozone profiles. Ozone retrievals are generated from the v8.6 SBUV algorithm. A Level-3 MZM file computes zonal means covering 5 degree latitude bands for each calendar month. For this product there are 126 months of data from August 2002 through January 2013. There are a total of 36 latitudinal bands, 18 in each hemisphere. Profile data are provided at 21 layers from 1013.25, 639.318, 403.382,254.517, 160.589, 101.325,63.9317, 40.3382, 25.4517, 16.0589, 10.1325, 6.39317,4.03382, 2.54517, 1.60589, 1.01325,0.639317, 0.403382, 0.254517, 0.160589 and 0.101325 hPa (measured at bottom of layer). NOTE: Some profiles have 20 layers and do not report the top most layer. Mixing ratios are reported at 15 layers from 0.5, 0.7, 1.0, 1.5, 2.0, 3.0, 4.0, 5.0, 7.0, 10.0, 15.0, 20.0, 30.0, 40.0 and 50.0 hPa (measured at middle of layer). The MZM product averages retrievals that meet the criteria for a good retrieval as determined by error flags in the Level 2 data. A good retrieval is defined as satisfying the following conditions: 1) Profile Error Flag = 0 or 1 (0 = good retrieval; 1 = solar zenith angle > 84 degrees). 2) Total Error Flags = 0, 1, 2 or 5 (0 = good retrieval; 1 = not used; 2 = solar zenith angle > 84 degrees; large discrepancy between profile total and best total ozone). NOTE - Total error flag = 5 is anomalously applied at high latitudes and high solar zenith angles where the B-Pair total ozone estimate is not as reliable as the ozone profile under these conditions. This error flag may be removed in future version of algorithm. The zonal means computed for each month are screened according to the following statistical criteria: 1) Number of good retrievals for the month greater than or equal to 2/3 of the samples for a nominal month. 2) Mean latitude of good retrievals less than or equal to 1 degree from center of latitude band. 3) Mean time of good retrievals less than or equal to 4 days from center of month (i.e., day = 15).
- API
Model Adaptation for Prognostics in a Particle Filtering Framework
data.nasa.gov | Last Updated 2020-01-29T02:10:29.000ZOne of the key motivating factors for using particle filters for prognostics is the ability to include model parameters as part of the state vector to be estimated. This performs model adaptation in conjunction with state tracking, and thus, produces a tuned model that can used for long term predictions. This feature of particle filters works in most part due to the fact that they are not subject to the “curse of dimensionality”, i.e. the exponential growth of computational complexity with state dimension. However, in practice, this property holds for “well-designed” particle filters only as dimensionality increases. This paper explores the notion of wellness of design in the context of predicting remaining useful life for individual discharge cycles of Li-ion batteries. Prognostic metrics are used to analyze the tradeoff between different model designs and prediction performance. Results demonstrate how sensitivity analysis may be used to arrive at a well- designed prognostic model that can take advantage of the model adaptation properties of a particle filter.*
- API
TOVS GLA MONTHLY GRIDS from NOAA-6 02 (TOVSAMNA) at GES DISC
data.nasa.gov | Last Updated 2024-03-18T15:31:55.000ZThis dataset (TOVSAMNA) contains the TIROS Operational Vertical Sounder (TOVS) level 3 geophysical parameters derived using data from NOAA-6 and the physical retrieval method of Susskind et al. (1984) and processed by the Satellite Data Utilization Office of the Goddard Laboratory for Atmospheres at NASA/GSFC. This method, which is hydrodynamic model- and a priori data-dependent, is designated as the so-called Path A scheme by the TOVS Pathfinder Science Working Group. The 20 channel High resolution Infrared Radiation Sounder 2 (HIRS2) and the 4 channel Microwave Sounding Unit (MSU) aboard the NOAA-xx series of Polar Orbiting Satellites are used to produce global fields of the 3-dimensional temperature-moisture structure of the atmosphere. In addition to profiles of temperature and moisture, the HIRS2/MSU data are used to derive important quantities such as land and sea surface temperature, outgoing longwave radiation, cloud fraction, cloudtop height, total ozone overburden and precipitation estimates. The Path A system steps through an interactive forecast-retrieval-analysis cycle. In each 6 hour synoptic period, a 2nd order General Circulation Model (Takacs et al., 1994) is used to generate the 6 hour forecast fields of temperature and humidity. These global fields are used as the first guess for all soundings occurring within a 6 hour time window centered upon the forecast time. These retrievals are then assimilated with all available insitu measurements (such as radiosonde and ship reports) in the 6 hour interval using an Optimal Interpolation (OI) analysis scheme developed by the Data Assimilation Office of the Goddard Laboratory for Atmospheres. This analysis is then used to specify the initial conditions for the next 6 hour forecast, thus completing the cycle. The retrieval algorithm itself is a physical method based on the iterative relaxation technique originally proposed by Chahine (1968). The basic approach consists of modifying the temperature profile from the previous iteration by an amount proportional to the difference between the observed brightness temperatures and the brightness temperatures computed from the trial parameters using the full radiative transfer equation applied at the observed satellite zenith angle. For the case of the temperature profile, the updated layer mean temperatures are given as a linear combination of multichannel brightness temperature differences with the coefficients given by the channel weighting functions. Constraints are imposed upon the solution in order to ensure stability and convergence of the iterative process. For more details see Susskind et al (1984). These Level 3 monthly mean products are in the netCDF format. Each data set is representative of a different monthly average time period and for one of nine satellites. All files contain the same number of geophysical parameter arrays with the AM and PM portions of the orbits treated separately. All data are mapped to a 1 degree longitude by 1 degree latitude global grid.
- API
SBUV2/NOAA-16 Ozone (O3) Profile and Total Column Ozone 1 Month Zonal Mean L3 Global 5.0 degree Latitude Zones V1 (SBUV2N16L3zm) at GES DISC
data.nasa.gov | Last Updated 2022-01-17T05:51:01.000ZThe Solar Backscattered Ultraviolet (SBUV) from NOAA-16 Level-3 monthly zonal mean (MZM) product (SBUV2N16L3zm) is derived from the Level-2 retrieved ozone profiles. Ozone retrievals are generated from the v8.6 SBUV algorithm. A Level-3 MZM file computes zonal means covering 5 degree latitude bands for each calendar month. For this product there are 154 months of data from October 2000 through July 2013. There are a total of 36 latitudinal bands, 18 in each hemisphere. Profile data are provided at 21 layers from 1013.25, 639.318, 403.382,254.517, 160.589, 101.325,63.9317, 40.3382, 25.4517, 16.0589, 10.1325, 6.39317,4.03382, 2.54517, 1.60589, 1.01325,0.639317, 0.403382, 0.254517, 0.160589 and 0.101325 hPa (measured at bottom of layer). NOTE: Some profiles have 20 layers and do not report the top most layer. Mixing ratios are reported at 15 layers from 0.5, 0.7, 1.0, 1.5, 2.0, 3.0, 4.0, 5.0, 7.0, 10.0, 15.0, 20.0, 30.0, 40.0 and 50.0 hPa (measured at middle of layer). The MZM product averages retrievals that meet the criteria for a good retrieval as determined by error flags in the Level 2 data. A good retrieval is defined as satisfying the following conditions: 1) Profile Error Flag = 0 or 1 (0 = good retrieval; 1 = solar zenith angle > 84 degrees). 2) Total Error Flags = 0, 1, 2 or 5 (0 = good retrieval; 1 = not used; 2 = solar zenith angle > 84 degrees; large discrepancy between profile total and best total ozone). NOTE - Total error flag = 5 is anomalously applied at high latitudes and high solar zenith angles where the B-Pair total ozone estimate is not as reliable as the ozone profile under these conditions. This error flag may be removed in future version of algorithm. The zonal means computed for each month are screened according to the following statistical criteria: 1) Number of good retrievals for the month greater than or equal to 2/3 of the samples for a nominal month. 2) Mean latitude of good retrievals less than or equal to 1 degree from center of latitude band. 3) Mean time of good retrievals less than or equal to 4 days from center of month (i.e., day = 15).
- API
Bio-optical properties of the different water masses in the Gulf of St. Lawrence
data.nasa.gov | Last Updated 2023-04-17T13:03:21.000ZThe St. Lawrence ecosystem is a complex environment influenced by a variety of physical forces (runoff, winds, tides, bathymetry) that sustains a diverse food web going from phytoplankton to whales. Chlorophyll concentration is thus an important variable to measure at the scale of the ecosystem. Because of its large size, remote sensing is the only available tool to measure chlorophyll distribution in the St. Lawrence using ocean color imagery. To fully utilize this type of data, it is however important to have a sound knowledge of the bio-optical properties of the different water masses in the system. A St. Lawrence SeaWiFS program was thus built to gather this knowledge beginning in 1997.
- API
TES/Aura L3 Water Vapor Monthly Gridded V006
data.nasa.gov | Last Updated 2022-01-17T05:58:53.000ZTL3H2OM_6 is the Tropospheric Emission Spectrometer (TES)/Aura Level 3 Water Vapor Monthly Gridded Version 6 data product. TES was an instrument aboard NASA's Aura satellite and was launched from California on July 15, 2004. Data collection for TES is complete. This data product consists of monthly atmospheric temperature and volume mixing ratios (VMRs) for the Water Vapor atmospheric species, which are provided at 2 degree latitude X 4 degree longitude spatial grids and at a subset of TES standard pressure levels. The TES Science Data Processing L3 subsystem interpolated L2 atmospheric profiles collected in a Global Survey onto a global grid uniform in latitude and longitude to provide a 3-D representation of the distribution of atmospheric gasses. Daily and monthly averages of L2 profiles and browse images are available. The L3 standard data products are composed of L3 HDF-EOS grid data. A separate product file was produced for each different atmospheric species. TES obtained data in two basic observation modes: Limb or Nadir; Nadir observations, which point directly to the surface of the Earth, are different from limb observations, which are pointed at various off-nadir angles into the atmosphere. The product file may contain, in separate folders, limb data, nadir data, or both folders may be present. Specific to L3 processing were the terms Daily and Monthly representing the approximate time coverage of the L3 products. However, the input data granules to the L3 process are complete Global Surveys; in other words a Global Survey was not split in relation to time when input to the L3 processes even if they exceed the usual understood meanings of a day or month. More specifically, Daily L3 products represented a single Global Survey (approximately 26 hours) and Monthly L3 products represent Global Surveys that are initiated within that calendar month. The data granules defined for L3 standard products were daily and monthly.
- API
Nano Dust Analyzer Project
data.nasa.gov | Last Updated 2020-01-29T04:54:41.000Z<p> We propose to develop a new highly sensitive instrument to confirm the existence of the so-called nano-dust particles, characterize their impact parameters, and measure their chemical composition. Simultaneous theoretical studies will be used to derive the expected&nbsp; mass and velocity ranges of these putative particles to formulate science and measurement requirements for the future deployment of&nbsp; the proposed Nano-Dust Analyzer (NDA)&nbsp;</p> <p> Early dust instruments onboard Pioneer 8 and 9 and Helios spacecraft detected a flow of submicron sized dust particles coming from the direction of the Sun. These particles originate in the inner solar system from mutual collisions among meteoroids and move on&nbsp; hyperbolic orbits that leave the Solar System under the prevailing radiation pressure force. Later dust instruments with higher&nbsp; sensitivity had to avoid looking toward the Sun because of interference from the solar wind and UV radiation and thus contributed&nbsp; little to the characterization of the dust stream. The one exception is the Ulysses dust detector that observed escaping dust particles&nbsp; high above the solar poles, which confirm the suspicion that charged nanometer sized dust grains are carried to high heliographic&nbsp; latitudes by electromagnetic interactions with the Interplanetary Magnetic Field (IMF). Recently, the STEREO WAVES instruments&nbsp; recorded a large number of intense electric field signals, which were interpreted as impacts from nanometer sized particles striking the&nbsp; spacecraft with velocities of about the solar wind speed. This high flux and strong spatial and/or temporal variations of nanometer&nbsp; sized dust grains at low latitude appears to be uncorrelated with the solar wind properties. This is a mystery as it would require that&nbsp; the total collisional meteoroid debris inside 1 AU is cast in nanometer sized fragments. The observed fluxes of inner-source pickup ions&nbsp; also point to the existence of a much enhanced dust population in the nanometer size range.&nbsp;</p> <p> This new heliospherical phenomenon of nano-dust streams may have consequences throughout the planetary system, but as of yet no dust instrument exists that could be used to shed light on their properties. &nbsp;We propose to develop a dust analyzer capable to detect and&nbsp; analyze these mysterious dust particles coming from the solar direction and to embark upon complementary theoretical studies to&nbsp; understand their characteristics. The instrument is based on the Cassini Dust Analyzer (CDA) that has analyzed the composition of&nbsp; nanometer sized dust particles emanating from the Jovian and Saturnian systems but could not be pointed towards the Sun. By&nbsp; applying technologies implemented in solar wind instruments and coronagraphs a highly sensitive dust analyzer will be developed and&nbsp; tested in the laboratory. The dust analyzer shall be able to characterize impact properties (impact charge and energy distribution of&nbsp; ions from which mass and speed of the impacting grains may be derived) and chemical composition of individual nanometer sized&nbsp; particles while exposed to solar wind and UV radiation. The measurements will enable us to identify the source of the dust by&nbsp; comparing their elemental composition with that of larger micrometeoroid particles of cometary and asteroid origin and will reveal&nbsp; interaction of nano-dust with the interplanetary medium by investigating the relation of the dust flux with solar wind and IMF&nbsp; properties.&nbsp;</p> <p> Complementary theoretically studies will be performed to understand the characteristics of nano-dust particles at 1 AU to answer the&nbsp; following questions:&nbsp; - What is the speed range at which nanometer sized particles impact
- API
Earth Radiation Budget Experiment (ERBE) S-10N (Nonscanner-only) Wide Field of View (WFOV) Numerical Filter (NF) Radiant Flux and Albedo Edition 3 in Native Format
data.nasa.gov | Last Updated 2022-01-17T05:17:12.000ZERBE_S10N_WFOV_NF_Edition3 is the Earth Radiation Budget Experiment (ERBE) S-10N (Nonscanner-only) Wide Field of View (WFOV) Numerical Filter (NF) Radiant Flux and Albedo Edition 3 in Native Format data product. Data collection for this product is complete. This data product contains temporally and spatially averaged shortwave (SW) and longwave (LW) top-of-the-atmosphere (TOA) fluxes derived from one month of Earth Radiation Budget Experiment non-scanning wide field-of-view instruments aboard the Earth Radiation Budget Satellite (ERBS). Instantaneous TOA fluxes were spatially averaged on 5° and 10° equal-angle grids using numerical filter and shape factor techniques, respectively. ERBE scanner-independent temporal interpolation algorithms were applied to produce daily, monthly-hourly, and monthly mean fluxes from the instantaneous gridded data. The S10N_WFOV files contain both temporally averaged and instantaneous gridded mean values of TOA total-sky LW flux, total-sky SW flux, and total-sky albedo for each 5° and 10° region observed during the month. The main difference between Edition3 and Edition2 releases is in the treatment of TOA radiative fluxes resulting from changes in the ERBE non-scanner processing algorithm to account for decay in satellite altitude over the data period.
- API
TES/Aura L3 Ozone Daily Gridded V006
data.nasa.gov | Last Updated 2022-01-17T05:58:51.000ZTL3O3D_6 is the Tropospheric Emission Spectrometer (TES)/Aura L3 Ozone Daily Gridded Version 6 data product. TES was an instrument aboard NASA's Aura satellite and was launched from California on July 15, 2004. Data collection for TES is complete. This data product consists of daily atmospheric temperature and volume mixing ratio (VMR) for the atmospheric species, which were provided at 2 degree latitude by 4 degree longitude spatial grids and at a subset of TES standard pressure levels. The TES Science Data Processing L3 subsystem interpolated the L2 atmospheric profiles collected in a Global Survey onto a global grid uniform in latitude and longitude to provide a 3-D representation of the distribution of atmospheric gasses. Daily and monthly averages of L2 profiles and browse images are available. The L3 standard data products were composed of L3 HDF-EOS grid data. A separate product file is produced for each different atmospheric species. TES obtains data in two basic observation modes: Limb or Nadir. The product file may have contained, in separate folders, limb data, nadir data, or both folders may be present. Specific to L3 processing are the terms Daily and Monthly representing the approximate time coverage of the L3 products. However, the input data granules to the L3 process are completed Global Surveys; in other words a Global Survey was not split in relation to time when input to the L3 processes even if they exceeded the usual understood meanings of a day or month. More specifically, Daily L3 products represented a single Global Survey (approximately 26 hours) and Monthly L3 products represented Global Surveys that were initiated within that calendar month. The data granules defined for L3 standard products were daily and monthly. Details of the format of this product can be found in the TES Data Products Specifications (DPS).
- API
TOVS GLA MONTHLY GRIDS from NOAA-14 02 (TOVSAMNJ) at GES DISC
data.nasa.gov | Last Updated 2024-03-18T15:31:58.000ZThis dataset (TOVSAMNJ) contains the TIROS Operational Vertical Sounder (TOVS) level 3 geophysical parameters derived using data from NOAA-14 and the physical retrieval method of Susskind et al. (1984) and processed by the Satellite Data Utilization Office of the Goddard Laboratory for Atmospheres at NASA/GSFC. This method, which is hydrodynamic model- and a priori data-dependent, is designated as the so-called Path A scheme by the TOVS Pathfinder Science Working Group. The 20 channel High resolution Infrared Radiation Sounder 2 (HIRS2) and the 4 channel Microwave Sounding Unit (MSU) aboard the NOAA-xx series of Polar Orbiting Satellites are used to produce global fields of the 3-dimensional temperature-moisture structure of the atmosphere. In addition to profiles of temperature and moisture, the HIRS2/MSU data are used to derive important quantities such as land and sea surface temperature, outgoing longwave radiation, cloud fraction, cloudtop height, total ozone overburden and precipitation estimates. The Path A system steps through an interactive forecast-retrieval-analysis cycle. In each 6 hour synoptic period, a 2nd order General Circulation Model (Takacs et al., 1994) is used to generate the 6 hour forecast fields of temperature and humidity. These global fields are used as the first guess for all soundings occurring within a 6 hour time window centered upon the forecast time. These retrievals are then assimilated with all available insitu measurements (such as radiosonde and ship reports) in the 6 hour interval using an Optimal Interpolation (OI) analysis scheme developed by the Data Assimilation Office of the Goddard Laboratory for Atmospheres. This analysis is then used to specify the initial conditions for the next 6 hour forecast, thus completing the cycle. The retrieval algorithm itself is a physical method based on the iterative relaxation technique originally proposed by Chahine (1968). The basic approach consists of modifying the temperature profile from the previous iteration by an amount proportional to the difference between the observed brightness temperatures and the brightness temperatures computed from the trial parameters using the full radiative transfer equation applied at the observed satellite zenith angle. For the case of the temperature profile, the updated layer mean temperatures are given as a linear combination of multichannel brightness temperature differences with the coefficients given by the channel weighting functions. Constraints are imposed upon the solution in order to ensure stability and convergence of the iterative process. For more details see Susskind et al (1984). These Level 3 monthly mean products are in the netCDF format. Each data set is representative of a different monthly average time period and for one of nine satellites. All files contain the same number of geophysical parameter arrays with the AM and PM portions of the orbits treated separately. All data are mapped to a 1 degree longitude by 1 degree latitude global grid.