- API
TRMM Microwave Imager (TMI) Gridded Oceanic Rainfall Product (TRMM Product 3A11) V7
nasa-test-0.demo.socrata.com | Last Updated 2015-07-20T04:52:56.000ZThe Tropical Rainfall Measuring Mission (TRMM) is a joint U.S.-Japan satellite mission to monitor tropical and subtropical precipitation and to estimate its associated latent heating. TRMM was successfully launched on November 27, at 4:27 PM (EST) from the Tanegashima Space Center in Japan. The TRMM Microwave Imager (TMI) is a nine-channel passive microwave radiometer, which builds on the heritage of the Special Sensor Microwave/Imager (SSM/I) instrument flown aboard the Defense Meteorological Satellite Program (DMSP) platforms. Microwave radiation is emitted by the Earth's surface and by water droplets within clouds. However, when layers of large ice particles are present in upper cloud regions - a condition highly correlated with heavy rainfall - microwave radiation tends to scatter at frequencies above 19 GHz. The TMI detects radiation at five frequencies chosen to discriminate among these processes, thus revealing the likelihood of rainfall. The key to accurate retrieval of rainfall rates by this method is the deduction of cloud precipitation consistent with the radiation measurement at each frequency. The TMI frequencies are 10.65, 19.35, 37 and 85.5 GHz (dual polarization), and 21 GHz (vertical polarization only). The TMI Gridded Oceanic Rainfall Product, also known as TMI Emission, consists of 5 degree by 5 degree monthly oceanic rainfall maps using TMI Level 1 data as input. Statistics of the monthly rainfall, including number of samples, standard deviation, goodness-of-fit (of the brightness temperature histogram to the lognormal rainfall distribution function) and rainfall probability are also included in the output for each grid box. Spatial coverage is between 40 degrees North and 40 degrees South owing to the 35 degree inclination of the TRMM satellite. TMI brightness temperature histograms at 1 degree intervals are generated based on the 19, 21 and 19-21 GHz combination channels obtained from the Level 1B (calibrated brightness temperature) TMI product. Monthly rainfall indices over the ocean are derived by statistically matching monthly histograms of brightness temperatures with model calculated rainfall Probability Distribution Functions (PDF) using the 19-21 GHz combination data. Retrieved monthly rainfall data must pass a quality test based on the quality of the PDF fit. The data are stored in the Hierarchical Data Format (HDF), which includes both core and product specific metadata applicable to the TMI measurements. A file contains 12 arrays of rainfall data and supporting information each of dimension 72 x 16, with a file size of about 40 KB (uncompressed). The HDF-EOS "grid" structure is used to accommodate the actual geophysical data arrays. There is 1 file of TMI 3A11 data produced per month.
- API
Summer Low Flow Indicator 1975-2017
data.wa.gov | Last Updated 2024-04-15T17:06:22.000ZSummer Low Flow Trend Indicator results, statewide, updated through Oct 2017. This information is updated annually with an additional year of flow data. These results are provided to the Puget Sound Partnership for their Vital Signs (http://www.psp.wa.gov/vitalsigns/summer_stream_flows.php) and to the Governor's Salmon Recovery Office for the "State of Salmon in Watersheds" report (http://stateofsalmon.wa.gov/statewide/indicators/water-quantity). The attached document "WR Indicator Outcomes Memo - 10-24-10.pdf" describes the methodology for developing these indicators. The attached document "Low Flow Indicator Metadata.pdf" describes the contents of each column. Dept. of Ecology home page: http://www.ecy.wa.gov/ Disclaimer: Information provided by Ecology on this Web site is accurate to the best of Ecology's knowledge and is subject to change on a regular basis, without notice. Ecology cannot and does not warrant that the information on this Web site is absolutely current, although every effort is made to ensure that it is kept as current as possible. Ecology cannot and does not warrant the accuracy of these documents beyond the source documents, although every attempt is made to work from authoritative sources. Links to related sites are provided as a courtesy, but Ecology is not responsible for their availability, content or policies.
- API
GPM, DPR, GMI Level 3 Combined Precipitation V03
nasa-test-0.demo.socrata.com | Last Updated 2015-07-20T05:03:54.000ZThere are uncertainties in the interpretation of data from any one of the instruments (KuPR, KaPR, and GMI). By using data from multiple instruments, further constraints on the solution of precipitation structure improve the final product.The purpose of 3CMB is to give a daily and monthly accumulation of the 2BCMB precipitation product. The 3CMB product is a daily and monthly accumulation of the 2BCMB orbital combined product at two grid sizes, 5 x 5 degrees (G1) and 0.25 x 0.25 degrees (G2). Grid G1 contains the following physical measurements of general interest, among others. Grid G2 contains the same groups, but it is on the ltH x lnH grid and does not have the surface type (st) dimension or the histograms (see dimension definitions below). Below, conditional products represent means based upon precipitating areas only; unconditional products represent means for raining and non-raining areas combined. Probabilities represent the number of raining observations divided by the total number of raining and non-raining observations. precipTotRate (Group in G1)- Conditional mean rate for all precipitation phases (ice, liquid, mixed-phase). * count (4-byte integer, array size: ltL x lnL x ns x hgt x rt x st): Count. * mean (4-byte float, array size: ltL x lnL x ns x hgt x rt x st): Mean, mm/h. * stdev (4-byte float, array size: ltL x lnL x ns x hgt x rt x st): Standard deviation for the monthly product. Mean of squares for the daily product, mm/h. * hist (4-byte integer, array size: ltL x lnL x ns x hgt x rt x st x bin): Histogram. precipLiqRate (Group in G1) - Conditional mean rate for liquid precipitation. * count (4-byte integer, array size: ltL x lnL x ns x hgt x rt x st): Count. * mean (4-byte float, array size: ltL x lnL x ns x hgt x rt x st): Mean, mm/h. * stdev (4-byte float, array size: ltL x lnL x ns x hgt x rt x st): Standard deviation for the monthly product. Mean of squares for the daily product, mm/h. * hist (4-byte integer, array size: ltL x lnL x ns x hgt x rt x st x bin): Histogram. precipTotWaterContent (Group in G1) - Conditional mean water content for all precipitation phases. * count (4-byte integer, array size: ltL x lnL x ns x hgt x rt x st): Count. * mean (4-byte float, array size: ltL x lnL x ns x hgt x rt x st): Mean, g/m3. * stdev (4-byte float, array size: ltL x lnL x ns x hgt x rt x st): Standard deviation for the monthly product. Mean of squares for the daily product, g/m3. * hist (4-byte integer, array size: ltL x lnL x ns x hgt x rt x st x bin): Histogram. precipLiqWaterContent (Group in G1) - Conditional mean liquid water content. * count (4-byte integer, array size: ltL x lnL x ns x hgt x rt x st): Count. * mean (4-byte float, array size: ltL x lnL x ns x hgt x rt x st): Mean, g/m3. * stdev (4-byte float, array size: ltL x lnL x ns x hgt x rt x st): Standard deviation for the monthly product. Mean of squares for the daily product, g/m3. * hist (4-byte integer, array size: ltL x lnL x ns x hgt x rt x st x bin): Histogram. precipTotDm (Group in G1) - Conditional mass-weighted mean particle diameter. * count (4-byte integer, array size: ltL x lnL x ns x hgt x rt x st): Count. * mean (4-byte float, array size: ltL x lnL x ns x hgt x rt x st): Mean, mm. * stdev (4-byte float, array size: ltL x lnL x ns x hgt x rt x st): Standard deviation for the monthly product. Mean of squares for the daily product, mm. * hist (4-byte integer, array size: ltL x lnL x ns x hgt x rt x st x bin): Histogram. precipTotRateDiurnal (Group in G1) - Conditional mean total surface precipitation rate indexed by local time. * count (4-byte integer, array size: ltL x lnL x ns x st x tim): Count. * mean (4-byte float, array size: ltL x lnL x ns x st x tim): Mean, mm/h. * stdev (4-byte float, array size: ltL x lnL x ns x st x tim): Standard deviation for the monthly product. Mean of squares for the daily product, mm/h. surfPrecipTotRateDiurnalAllObs (4-byte integer, array size: ltL x lnL x ns x st x tim): Number of total observa...
- API
Average Trend Percent by WRIA
data.wa.gov | Last Updated 2022-09-07T23:23:38.000ZSummer Low Flow Trend Indicator results, statewide, updated through Oct 2013. This information is updated annually with an additional year of flow data. These results are provided to the Puget Sound Partnership for their Vital Signs (http://www.psp.wa.gov/vitalsigns/summer_stream_flows.php) and to the Governor's Salmon Recovery Office for the "State of Salmon in WAtersheds" report (http://stateofsalmon.wa.gov/statewide/indicators/water-quantity). The attached document "WR Indicator Outcomes Memo - 10-24-10.pdf" describes the methodology for developing these indicators. The attached document "Low Flow Indicator Metadata.pdf" describes the contents of each column. Dept. of Ecology home page: http://www.ecy.wa.gov/ Disclaimer: Information provided by Ecology on this Web site is accurate to the best of Ecology's knowledge and is subject to change on a regular basis, without notice. Ecology cannot and does not warrant that the information on this Web site is absolutely current, although every effort is made to ensure that it is kept as current as possible. Ecology cannot and does not warrant the accuracy of these documents beyond the source documents, although every attempt is made to work from authoritative sources. Links to related sites are provided as a courtesy, but Ecology is not responsible for their availability, content or policies.
- API
Net Zero Porter Ranch: Solar PV Permits
data.lacity.org | Last Updated 2023-05-22T09:33:24.000ZThe Department of Building and Safety issues permits for the construction, remodeling, and repair of buildings and structures in the City of Los Angeles. Permits are categorized into building permits, electrical permits, and mechanical permits (which include plumbing, HVAC systems, fire sprinklers, elevators, and pressure vessels). Depending on the complexity of a project, a permit may be issued the same day with Express Permit or e-Permit ("No Plan Check" category), or a permit may require that the plans be reviewed ("Plan Check" category) by a Building and Safety Plan Check personnel.
- API
CD4-91403zip
data.lacity.org | Last Updated 2023-05-22T09:33:24.000ZThe Department of Building and Safety issues permits for the construction, remodeling, and repair of buildings and structures in the City of Los Angeles. Permits are categorized into building permits, electrical permits, and mechanical permits (which include plumbing, HVAC systems, fire sprinklers, elevators, and pressure vessels). Depending on the complexity of a project, a permit may be issued the same day with Express Permit or e-Permit ("No Plan Check" category), or a permit may require that the plans be reviewed ("Plan Check" category) by a Building and Safety Plan Check personnel.
- API
HCD Property Investments FY10-Q1 23
data.memphistn.gov | Last Updated 2023-07-11T20:17:08.000ZAddress-level dataset of of properties receiving HCD services from July 1, 2009 - March 31, 2023 (FY10-Q1 23). Data was combined in June-July 2020 from multiple sources, including IDIS (HUD data and reimbursement system), tracking spreadsheets maintained by HCD managers, and WAPez (weatherization data system).
- API
Demolition permit
data.lacity.org | Last Updated 2023-05-22T09:33:24.000ZThe Department of Building and Safety issues permits for the construction, remodeling, and repair of buildings and structures in the City of Los Angeles. Permits are categorized into building permits, electrical permits, and mechanical permits (which include plumbing, HVAC systems, fire sprinklers, elevators, and pressure vessels). Depending on the complexity of a project, a permit may be issued the same day with Express Permit or e-Permit ("No Plan Check" category), or a permit may require that the plans be reviewed ("Plan Check" category) by a Building and Safety Plan Check personnel.
- API
Development Plans
data.lacity.org | Last Updated 2023-05-22T09:33:24.000ZThe Department of Building and Safety issues permits for the construction, remodeling, and repair of buildings and structures in the City of Los Angeles. Permits are categorized into building permits, electrical permits, and mechanical permits (which include plumbing, HVAC systems, fire sprinklers, elevators, and pressure vessels). Depending on the complexity of a project, a permit may be issued the same day with Express Permit or e-Permit ("No Plan Check" category), or a permit may require that the plans be reviewed ("Plan Check" category) by a Building and Safety Plan Check personnel.
- API
2018 Kansas City Energy and Water Consumption Benchmarking for Community-Wide Buildings v1.0
data.kcmo.org | Last Updated 2019-07-26T15:14:25.000ZThe first version of the 2018 Energy and Water consumption sent to the City by owners of buildings 50,000 SQFT or greater using the Energy Star Portfolio Manager tool. Data is required by the Energy Empowerment Ordinance in Kansas City, Missouri. The data were collected in 2019 and might be appended as new submissions come in.