- API
Vital Signs: Street Pavement Condition - Bay Area (Updated October 2019)
data.bayareametro.gov | Last Updated 2019-10-15T03:16:14.000ZVITAL SIGNS INDICATOR Street Pavement Condition (T16) FULL MEASURE NAME Pavement condition index (PCI) LAST UPDATED October 2019 DESCRIPTION Street pavement condition, more commonly referred to as the pavement condition index (PCI), reflects the quality of pavement on local streets and roads in the region. Calculated using a three-year moving average, PCI ranges from zero (failed) to 100 (brand-new) and has been used as a regional indicator of pavement preservation for over a decade. DATA SOURCE Metropolitan Transportation Commission: StreetSaver CONTACT INFORMATION vitalsigns.info@bayareametro.gov METHODOLOGY NOTES (across all datasets for this indicator) Pavement condition index (PCI) relies upon a three-year moving average for regional, county and city PCI to improve the reliability of the PCI data on an annual basis. The index ranges from 0 to 100, with 0 representing a failed road and 100 representing a brand-new facility. Segment PCI data is collected on a rolling basis but is imputed for interim years based on facility age and treatments using the MTC StreetSaver system. Pavement condition data was not collected in 2008. As such, 2007 and 2009 PCI scores were averaged to compute a 2008 estimate for the region, county and city datasets. Due to a lack of reported PCI data for the city of Palo Alto in 2007, an average could not be calculated, so Palo Alto is not included in the Regional Distribution chart.
- API
Vital Signs: Street Pavement Condition - by City (Updated August 2018)
data.bayareametro.gov | Last Updated 2018-08-21T00:42:13.000ZVITAL SIGNS INDICATOR Street Pavement Condition (T16) FULL MEASURE NAME Pavement condition index (PCI) LAST UPDATED August 2018 DESCRIPTION Street pavement condition, more commonly referred to as the pavement condition index (PCI), reflects the quality of pavement on local streets and roads in the region. Calculated using a three-year moving average, PCI ranges from zero (failed) to 100 (brand-new) and has been used as a regional indicator of pavement preservation for over a decade. DATA SOURCE Metropolitan Transportation Commission: StreetSaver CONTACT INFORMATION vitalsigns.info@bayareametro.gov METHODOLOGY NOTES (across all datasets for this indicator) Pavement condition index (PCI) relies upon a three-year moving average for regional, county, and city PCI to improve the reliability of the PCI data on an annual basis. The index ranges from 0 to 100, with 0 representing a failed road and 100 representing a brand-new facility. Segment PCI data is collected on a rolling basis but is imputed for interim years based on facility age and treatments using the MTC StreetSaver system. Due to the lack of reported PCI data in 2007, the city of Palo Alto is not included in the Regional Distribution chart.
- API
Vital Signs: Street Pavement Condition - by County (Updated August 2018)
data.bayareametro.gov | Last Updated 2018-08-21T00:38:43.000ZVITAL SIGNS INDICATOR Street Pavement Condition (T16) FULL MEASURE NAME Pavement condition index (PCI) LAST UPDATED August 2018 DESCRIPTION Street pavement condition, more commonly referred to as the pavement condition index (PCI), reflects the quality of pavement on local streets and roads in the region. Calculated using a three-year moving average, PCI ranges from zero (failed) to 100 (brand-new) and has been used as a regional indicator of pavement preservation for over a decade. DATA SOURCE Metropolitan Transportation Commission: StreetSaver CONTACT INFORMATION vitalsigns.info@bayareametro.gov METHODOLOGY NOTES (across all datasets for this indicator) Pavement condition index (PCI) relies upon a three-year moving average for regional, county, and city PCI to improve the reliability of the PCI data on an annual basis. The index ranges from 0 to 100, with 0 representing a failed road and 100 representing a brand-new facility. Segment PCI data is collected on a rolling basis but is imputed for interim years based on facility age and treatments using the MTC StreetSaver system. Due to the lack of reported PCI data in 2007, the city of Palo Alto is not included in the Regional Distribution chart.
- API
Vital Signs: Street Pavement Condition - by decade (Updated August 2018)
data.bayareametro.gov | Last Updated 2018-08-21T00:44:35.000ZVITAL SIGNS INDICATOR Street Pavement Condition (T16) FULL MEASURE NAME Pavement condition index (PCI) LAST UPDATED August 2018 DESCRIPTION Street pavement condition, more commonly referred to as the pavement condition index (PCI), reflects the quality of pavement on local streets and roads in the region. Calculated using a three-year moving average, PCI ranges from zero (failed) to 100 (brand-new) and has been used as a regional indicator of pavement preservation for over a decade. DATA SOURCE Metropolitan Transportation Commission: StreetSaver CONTACT INFORMATION vitalsigns.info@bayareametro.gov METHODOLOGY NOTES (across all datasets for this indicator) Pavement condition index (PCI) relies upon a three-year moving average for regional, county, and city PCI to improve the reliability of the PCI data on an annual basis. The index ranges from 0 to 100, with 0 representing a failed road and 100 representing a brand-new facility. Segment PCI data is collected on a rolling basis but is imputed for interim years based on facility age and treatments using the MTC StreetSaver system. Due to the lack of reported PCI data in 2007, the city of Palo Alto is not included in the Regional Distribution chart.
- API
Vital Signs: Life Expectancy Ten Year Change – by city
data.bayareametro.gov | Last Updated 2018-07-06T18:04:50.000ZVITAL SIGNS INDICATOR Street Pavement Condition (T16) FULL MEASURE NAME Pavement condition index (PCI) LAST UPDATED May 2017 DESCRIPTION Street pavement condition, more commonly referred to as the pavement condition index (PCI), reflects the quality of pavement on local streets and roads in the region. Calculated using a three-year moving average, PCI ranges from zero (failed) to 100 (brand-new) and has been used as a regional indicator of pavement preservation for over a decade. DATA SOURCE Metropolitan Transportation Commission: StreetSaver CONTACT INFORMATION vitalsigns.info@mtc.ca.gov METHODOLOGY NOTES (across all datasets for this indicator) Pavement condition index (PCI) relies upon a three-year moving average for regional, county, and city PCI to improve the reliability of the PCI data on an annual basis. The index ranges from 0 to 100, with 0 representing a failed road and 100 representing a brand-new facility. Segment PCI data is collected on a rolling basis but is imputed for interim years based on facility age and treatments using the MTC StreetSaver system. Due to the lack of reported PCI data in 2006, the city of Palo Alto is not included in the Regional Distribution chart.
- API
Vital Signs: Greenfield Development – by metro area
data.bayareametro.gov | Last Updated 2020-07-03T16:36:42.000ZVITAL SIGNS INDICATOR Greenfield Development (LU5) FULL MEASURE NAME The acres of construction on previously undeveloped land LAST UPDATED November 2019 DESCRIPTION Greenfield development refers to construction on previously undeveloped land and the corresponding expansion of our region’s developed footprint, which includes the extent of urban and built-up lands. The footprint is defined as land occupied by structures, with a building density of at least 1 unit to 1.5 acres. DATA SOURCE Department of Conservation: Farmland Mapping and Monitoring Program GIS Data Tables/Layers (1990-2016) https://www.conservation.ca.gov/dlrp/fmmp U.S. Census Bureau: Decennial Census Population by Census Block Group (2000-2010) http://factfinder.census.gov U.S. Census Bureau: American Community Survey (5-year) Population by Census Block Group (2000-2017) http://factfinder.census.gov METHODOLOGY NOTES (across all datasets for this indicator) For regional and local data, FMMP maps the extent of “urban and built-up” lands, which generally reflect the developed urban footprint of the region. The footprint is defined as land occupied by structures with building density of at least 1 unit to 1.5 acres. Uses include residential, industrial, commercial, construction, institutional, public administration, railroad and other transportation yards, cemeteries, airports, golf courses, sanitary landfills, sewage treatment, water control structures, and other developed purposes. To determine the amount of greenfield development (in acres) occurring in a given two-year period, the differences in urban footprint are computed on a county-level. FMMP makes slight refinements to urban boundaries over time, so changes in urban footprint +/- 100 acres are not regionally significant. The GIS shapefile represents the 2016 urban footprint and thus does not show previously urbanized land outside of the footprint (i.e. Hamilton Air Force Base). For metro comparisons, a different methodology had to be used to avoid the geospatial limitations associated with FMMP. U.S. Census population by census block group was gathered for each metro area for 2000, 2010, and 2017. Population data for years 2000 and 2010 come from the Decennial Census while data for 2018 comes from the 2017 5-year American Community Survey. The block group was considered urbanized if its average/gross density was greater than 1 housing unit per acre (a slightly higher threshold than FMMP uses for its definition). Because a block group cannot be flagged as partially urbanized, and non-residential uses are not fully captured, the urban footprint of the region calculated with this methodology is smaller than in FMMP. The metro data should be primarily used for looking at comparative growth rate in greenfield development rather than the acreage totals themselves.
- API
Vital Signs: Jobs By Industry – Bay Area
data.bayareametro.gov | Last Updated 2019-08-13T16:19:32.000ZVITAL SIGNS INDICATOR Jobs by Industry (EC1) FULL MEASURE NAME Employment by place of work by industry sector LAST UPDATED July 2019 DESCRIPTION Jobs by industry refers to both the change in employment levels by industry and the proportional mix of jobs by economic sector. This measure reflects the changing industry trends that affect our region’s workers. DATA SOURCE California Employment Development Department: Current Employment Statistics 1990-2017 http://www.labormarketinfo.edd.ca.gov/ CONTACT INFORMATION vitalsigns.info@bayareametro.gov METHODOLOGY NOTES (across all datasets for this indicator) The California Employment Development Department (EDD) provides estimates of employment by place of work and by industry. Industries are classified by their North American Industry Classification System (NAICS) code. Vital Signs aggregates employment into 11 industry sectors: Farm, Mining, Logging and Construction, Manufacturing, Trade, Transportation and Utilities, Information, Financial Activities, Professional and Business Services, Educational and Health Services, Leisure and Hospitality, Government, and Other. EDD counts all public-sector jobs under Government, including public transportation, public schools, and public hospitals. The Other category includes service jobs such as auto repair and hair salons and organizations such as churches and social advocacy groups. Employment in the technology sector are classified under three categories: Professional and Business Services, Information, and Manufacturing. The latter category includes electronic and computer manufacturing. For further details of typical firms found in each sector, refer to the 2012 NAICS Manual (http://www.census.gov/cgi-bin/sssd/naics/naicsrch?chart=2012). The Bureau of Labor Statistics (BLS) provides industry estimates for non-Bay Area metro areas. Their main industry employment estimates, the Current Employment Survey and Quarterly Census of Employment and Wages, do not provide annual estimates of farm employment. To be consistent, the metro comparison evaluates nonfarm employment for all metro areas, including the Bay Area. Industry shares are thus slightly different for the Bay Area between the historical trend and metro comparison sections. The location quotient (LQ) is used to evaluate level of concentration or clustering of an industry within the Bay Area and within each county of the region. A location quotient greater than 1 means there is a strong concentration for of jobs in an industry sector. For the Bay Area, the LQ is calculated as the share of the region’s employment in a particular sector divided by the share of the nation’s employment in that same sector. Because BLS does not provide national farm estimates, note that there is no LQ for regional farm employment. For each county, the LQ is calculated as the share of the county’s employment in a particular sector divided by the share of the region’s employment in that same sector.
- API
Vital Signs: Highway Pavement Condition – Bay Area
data.bayareametro.gov | Last Updated 2018-07-06T18:05:10.000ZVITAL SIGNS INDICATOR Highway Pavement Condition (T17) FULL MEASURE NAME Distressed share of highway lane-miles LAST UPDATED February 2017 DESCRIPTION Highway pavement condition, measured by the share of highway lane-miles flagged as “distressed” by Caltrans, reflects the regional pavement quality on the highway system. The dataset includes regional and road segment tables. DATA SOURCE California Department of Transportation: State of the Pavement Report http://www.dot.ca.gov/hq/maint/Pavement/Pavement_Program/PDF/2015_SOP-7-9_12-22-15-FINAL_revised_1-4-15.pdf CONTACT INFORMATION vitalsigns.info@mtc.ca.gov METHODOLOGY NOTES (across all datasets for this indicator) Caltrans datasets only include regional performance on a historical basis and rely on "distressed" lane-mileage as an indicator for poor pavement condition. The geospatial data for 2015 provides the condition on each lane-mile for each segment of roadway; data on a corridor basis reflects a sum of all lane-mileage for that corridor.
- API
Vital Signs: Street Pavement Condition - by county (Updated October 2019)
data.bayareametro.gov | Last Updated 2019-10-15T03:15:32.000ZVITAL SIGNS INDICATOR Street Pavement Condition (T16) FULL MEASURE NAME Pavement condition index (PCI) LAST UPDATED October 2019 DESCRIPTION Street pavement condition, more commonly referred to as the pavement condition index (PCI), reflects the quality of pavement on local streets and roads in the region. Calculated using a three-year moving average, PCI ranges from zero (failed) to 100 (brand-new) and has been used as a regional indicator of pavement preservation for over a decade. DATA SOURCE Metropolitan Transportation Commission: StreetSaver CONTACT INFORMATION vitalsigns.info@bayareametro.gov METHODOLOGY NOTES (across all datasets for this indicator) Pavement condition index (PCI) relies upon a three-year moving average for regional, county and city PCI to improve the reliability of the PCI data on an annual basis. The index ranges from 0 to 100, with 0 representing a failed road and 100 representing a brand-new facility. Segment PCI data is collected on a rolling basis but is imputed for interim years based on facility age and treatments using the MTC StreetSaver system. Pavement condition data was not collected in 2008. As such, 2007 and 2009 PCI scores were averaged to compute a 2008 estimate for the region, county and city datasets. Due to a lack of reported PCI data for the city of Palo Alto in 2007, an average could not be calculated, so Palo Alto is not included in the Regional Distribution chart.
- API
ART Bay Area Inundation Scenario - 36" Sea Level Rise
data.bayareametro.gov | Last Updated 2023-06-09T00:07:18.000ZInundation feature set representing areas vulnerable to a 36 inch rise in sea level for the San Francisco Bay Region. This is a derivative feature set, assembled by the Metropolitan Transportation Commission (MTC), created by merging county-specific, land-only inundation feature sets. The source, county-level feature sets were produced for Adapting to Rising Tides (ART), a program led by the San Francisco Bay Conservation and Development Commission (BCDC), in September 2017. The sea level rise (SLR) scenario used to produce this data represents 36 inches (three feet) of water level above the current mean higher high water (MHHW) tidal datum. This is considered the most likely level of sea level rise expected by 2100; or an existing 50-year extreme tide. The polygons contain the extent and depth of land-only inundation (in feet) flooding of the bayside shoreline. Depth of flooding were created by subtracting a land surface Digital Elevation Model (DEM) from the water surface DEM representing the SLR scenario (MHHW + SLR). Extent of flooding were created by employing a two rule assessment to determine if an area is inundated. It must be below the assigned water surface DEM elevation value, and it must be connected to an adjacent area that was either flooded or open water. This method applies an "eight-side rule" for connectedness, where the area is considered "connected" if any of its cardinal or diagonal directions is connected to a flooded area or open water. Hydraulic connectivity assessment removes areas from the inundation zone if they are protected by levees or other topographic features that prevent inland inundation. This assessment also removed areas that are low lying but inland and not directly connected to an adjacent inundated area. The 36 inch SLR scenario can be used to approximate all extreme tide/sea level rise combinations that produce a water level in the range of MHHW + 33 inches to MHHW + 39 inches, including: - 36 inches of SLR; - 1-year extreme tide event coupled with 24 inches of SLR; - 2-year extreme tide event coupled with 18 inches of SLR; - 5-year extreme tide event coupled with 12 inches of SLR; - 25-year extreme tide event coupled with 6 inches of SLR, and - 50-year extreme tide event under existing conditions (no SLR). Publication Date: June 2019 Creation Date: March 2019 Status: Progress: Complete Maintenance and Update Frequency: None planned Contact Information: Contact Organization: Metropolitan Transportation Commission Contact Person: Data & Visualization Contact Address: Address Type: mailing and physical Address: 375 Beale Street, Suite 800 City: San Francisco State or Province: California Postal Code: 94105 Country: United States of America Contact Voice Telephone: (415) 778-6700 Contact Electronic Mail Address: dataviz@bayareametro.gov Hours: 9:00 AM - 5:00 PM (PST) Monday through Friday