- API
Modular, Fault-Tolerant Electronics Supporting Space Exploration Project
nasa-test-0.demo.socrata.com | Last Updated 2015-07-20T05:26:45.000ZModern electronic systems tolerate only as many point failures as there are redundant system copies, using mere macro-scale redundancy. Fault Tolerant Electronics Supporting Space Exploration (FTESSE) creates an electronic design paradigm using reprogrammable FPGAs to create swappable Circuit Object Blocks (COBs) ? analogous to software objects ? for the first time enabling redundancy on a micro-scale. The result is an increased tolerance of point failures by several orders of magnitude over traditional approaches. In the FTESSE approach, FPGAs are partitioned into COBs (groups of gates), each performing a specific function. Bad areas can be mapped like the bad sector data on a disk drive, enabling COBs to be placed in areas of working gates to recover system performance. Hardware tested during Phase I verified point failures could be introduced into an example circuit and corrected. As in the Phase I model, circuits to be monitored reside on a Slave FPGA, and a Master FPGA monitors outputs of all COBs, sensing faults and mapping non-working gates on the Slave FPGA. The Master is a rad-hard, triple mode redundancy (TMR) FPGA, but the Slaves need not be, opening the doors to higher performance applications while maintaining high levels of fault tolerance.
- API
Software for Application of HHT Technologies to Time Series Analysis Project
nasa-test-0.demo.socrata.com | Last Updated 2015-07-20T05:27:16.000ZThe proposed innovation is a robust and user-friendly software environment where NASA researchers can customize the latest HHT technologies for the LISA (and LIGO) application. The proposed technology will include the latest discoveries and inventions not available in the state-of-the-art. Its taxonomy includes gravitational sensors and sources, expert systems, portable data analysis tools, software development environments, and software tools for distributed analysis and simulation. The disturbance caused by the passage of a gravitational wave is expected to be very small and will be measured with laser interferometry. The Hilbert-HuangTransform (HHT)and related analysis technologies developed since the original concept has been used successfully in other applications to extract non-linear and transient signal comonents of very small magnitude with respect to the measured signal. The proposed research and development team has participated in the latest cycle of technology development related to the HHT at the theoretical, implementation, and application levels. Not only will the creation of the proposed software contribute to the data analysis of the gravitational wave signals in the laser interferometry measurements (for both LIGO and LISA data), but also in other applications within and outside NASA's mission.
- API
Novel Versatile Intelligent Drug Delivery Project
nasa-test-0.demo.socrata.com | Last Updated 2015-07-20T05:23:14.000ZThis SBIR project will demonstrate and develop a novel micro-pump capable of controlled and selective chemical transport. Phase I will create, characterize, and model a robust and readily fabricated low-power miniaturized pump achieving "forceless" dissolved ion transport compatible with microgravity conditions. The compact technology will be extremely versatile, low-cost, stable, easily tailorable, and readily scaleable to higher fluxes via structure duplication and application in parallel. The device will be physically stable, chemically inert, and pH insensitive while its small dimensions result in lower power consumption and reduced mass. The result will be a more versatile and general pump capable of moving a variety of drugs. Phase I will explore the pump performance, stability, and design optimization using selected ionic compounds as model transport subjects by running designed experiments exploring pump operations as a function of key pump structural and operation variables. This data will determine the controlling variables, their effects on the system performance, and will be utilized with first-principles system physics analysis to develop a pump operation model. This model will allow rapid technology configuration exploration, operation performance refinement, and will provide critical insights into preferred, better optimized, structures to be evaluated during Phase II.
- API
Vibration-Free Cooling Cycle Pump for Space Vehicles and Habitats Project
nasa-test-0.demo.socrata.com | Last Updated 2015-07-20T05:26:51.000ZMainstream Engineering Corporation completed the design of a high-speed pump for International Space Station (ISS) Environmental Control and Life Support Systems and future spacecraft and extraterrestrial outpost applications. Specifications for this pump were derived from an existing pump currently operating as part of the thermal control loop on the ISS. The design includes magnetic bearings so that a vibration-reducing control algorithm can be implemented. A digital controller was designed, which measured and reduced vibration-causing fluctuations in shaft displacement due to rotor unbalance in multiple axes. The controller was tested over an operating speed range of 600 to 7200 rpm with excellent results. The controller reduced mean shaft displacement by 71% over the entire operating range, and reduced it by more than 80% at higher operating speeds where synchronous vibration was dominant. In Phase II the magnetic bearing equipped cooling loop pump designed in Phase I will be fabricated and tested. Mainstream will demonstrate the added efficiency, reliability, and low vibration of the system as compared with the existing pump. The pump assembly will undergo vibration characterization testing with support from Marshall Space Flight Center.
- API
Stable, Extreme Temperature, High Radiation, Compact. Low Power Clock Oscillator for Space, Geothermal, Down-Hole & other High Reliability Applications Project
nasa-test-0.demo.socrata.com | Last Updated 2015-07-20T05:30:08.000ZEfficient and stable clock signal generation requirements at extreme temperatures (-180C to +450C)and radiation (>250 Krad TID) are not met with the current solutions.Chronos technology proposes to design and fabricate RTXO as a new, comprehensive and scalable solution that simultaneously addresses the attributes of a reliable clock source in extreme environments. RTXO offers very small form-factor 5X7mm surface mount device utilizing high-Q Quartz material and CMOS/SOI for the extreme cold temperatures of Mars surface up to +110C. For extreme high temperature (to +450C) it uses Silicon Carbide (SiC-4H) semiconductor technology, high quality Gallium Orthophisphate (GaPO4) piezo-electric resonator material in a non-adhesive configured innovative assembly. All the different elements and processes used in the RTXO technology have been investigated in phase I to comply with the intended performance. This includes the individual elements, packaging, interconnecting method and manufacturing processes. RTXO offers standard signal interface, wide operating voltage range, conventional microelectronic packaging, and industry standard and reliable metal to metal as well as glass to metal sealing processes. RTXO delivers its exceptional performance over a wide (application specific) frequency range to 100 MHz from a single supply voltage and requires very low power.
- API
NLDAS Noah Land Surface Model L4 Monthly 0.125 x 0.125 degree V002
nasa-test-0.demo.socrata.com | Last Updated 2015-07-20T04:56:05.000ZThis data set contains a series of land surface parameters simulated from the Noah land-surface model (LSM) for Phase 2 of the North American Land Data Assimilation System (NLDAS-2). The data are in 1/8th degree grid spacing and range from Jan 1979 to the present. The temporal resolution is monthly. The file format is WMO GRIB-1. The NLDAS-2 monthly Noah model data were generated from the NLDAS-2 hourly Noah model data, as monthly accumulation for rainfall, snowfall, subsurface runoff, surface runoff, total evapotranspiration, and snow melt, and monthly average for other variables. Monthly period of each month is from 00Z at start of the month to 23:59Z at end of the month, except the first month (Jan 1979) that starts from 00Z 02 Jan 1979. Also for the first month (Jan 1979), because the variables listed as instantaneous in the README file (http://hydro1.sci.gsfc.nasa.gov/data/s4pa/NLDAS/README.NLDAS2.pdf) do not have valid data exactly on 00Z 02 Jan 1979, and this one hour is not included in the average for this month only. Brief description about the NLDAS-2 monthly Noah model can be found from the GCMD DIF for GES_DISC_NLDAS_NOAH0125_H_V002 at http://gcmd.gsfc.nasa.gov/getdif.htm?GES_DISC_NLDAS_NOAH0125_H_V002. Details about the NLDAS-2 configuration of the Noah LSM can be found in Xia et al. (2012). The NLDAS-2 Noah monthly data contain fifty-two fields. The data set applies a user-defined parameter table to indicate the contents and parameter number. The GRIBTAB file (http://disc.sci.gsfc.nasa.gov/hydrology/grib_tabs/gribtab_NLDAS_NOAH.002.txt) shows a list of parameters for this data set, along with their Product Definition Section (PDS) IDs and units. For information about the vertical layers of the Soil Moisture Content (PDS 086), Soil Temperature (PDS 085), and Liquid Soil Moisture Content (PDS 151) please see the README Document at ftp://hydro1.sci.gsfc.nasa.gov/data/s4pa/NLDAS/README.NLDAS2.pdf or the GrADS ctl file at ftp://hydro1.sci.gsfc.nasa.gov/data/gds/NLDAS/NLDAS_NOAH0125_M.002.ctl.
- API
Robust Optimal Fragmentation and Dispersion of Near-Earth Objects Project
nasa-test-0.demo.socrata.com | Last Updated 2015-07-20T05:31:30.000Z<p> During the past 2 decades, various concepts for mitigating the impact threats from NEOs have been proposed, but many of these concepts were impractical and not technically credible. In particular, all non-nuclear techniques require mission lead times larger than 10 years. However, for the most probable impact threat with a warning time less than 10 years, the use of high-energy nuclear explosives in space becomes inevitable for proper fragmentation and dispersion of an NEO in a collision course with Earth. However, the existing nuclear subsurface penetrator technology limits the impact velocity to less than 300m/s because higher impact velocities destroy prematurely the detonation electronic equipment. Thus, an innovative space system architecture utilizing high-energy nuclear explosives must be developed for a worst-case intercept mission resulting in relative closing velocities as high as 5-30km/s. An advanced system concept is proposed for nuclear subsurface explosion missions. The concept blends a hypervelocity kinetic-energy impactor with nuclear subsurface explosion, and exploits a 2-body space vehicle consisting of a fore body and an aft body. These 2 spacecraft bodies may be connected by a deployable boom. The fore body provides proper kinetic impact crater conditions for an aft body carrying nuclear explosives to make a deeper penetration into an asteroid body. For such a complex mission architecture design study, non-traditional, multidisciplinary research efforts in the areas of hypervelocity impact dynamics, nuclear explosion modeling, high-temperature thermal shielding, shock-resistant electronic systems, and advanced space system technologies are required. Expanding upon the current research activities, the Iowa State Asteroid Deflection Research Center will develop an innovative, advanced space system architecture that provides the planetary defense capabilities needed to enable a future real space mission more efficient, affordable, and reliable.</p>
- API
NIST MFG USA Geodata
performance.commerce.gov | Last Updated 2022-07-19T20:57:30.000Z - API
Count of Violent Crimes in Pierce County
internal.open.piercecountywa.gov | Last Updated 2023-11-07T19:38:38.000ZNumber of burglary, theft, arson, and destruction of property crimes in Pierce County. Crime data derived from the "Crimes in Washington" annual report (by year) compiled from data submitted to the Washington State Uniform Crime Reporting Program of the Washington Association of Sheriffs and Police Chiefs by Washington State law enforcement agencies. Only specific crimes are highlighted in the crime rates presented here. These numbers represent total numbers of reported crimes in each category (not arrests which may occur over a prolonged period). The following categories represent the violent crimes considered in this data: Murder, Manslaughter, Forcible Sex, Assault, Kidnapping/Abduction, Human Trafficking, and Robbery. The following categories represent the property crimes considered in this data: Burglary, Theft, Arson, and Destruction of Property. Each set of crimes is totaled, then the rate per 1,000 people is calculated using the total # of crimes and the current population of each jurisdiction per year as provided in the same report. This is a voluntary program and as such, some law enforcement agencies do not participate or have only recently participated, which is also reflected in this table.
- API
Solid-Solid Vacuum Regolith Heat-Exchanger for Oxygen Production Project
nasa-test-0.demo.socrata.com | Last Updated 2015-07-20T05:17:45.000ZThis SBIR Phase-1 project will demonstrate the feasibility of using a novel coaxial counterflow solid-solid heat exchanger to recover heat energy from spent regolith at 1050<SUP>o</SUP>C to pre-heat inlet regolith to 750<SUP>o</SUP>C, either continuously, or in 20kg batches. In granular solids the area of contacts between 'touching' grains is quite small. Thus, solid-solid conduction often plays only a minor role in heat transfer through granular solids (i.e., 'effective' conduction), and when an interstitial gas is present, heat transfer occurs primarily via conduction through the gas. If the granular solid is also flowing, then solids convection becomes a significant factor in overall heat transfer and effective 'conduction'. Under vacuum conditions, and at temperatures above 700<SUP>o</SUP>C, radiation will dominate most heat transfer processes; however, solids convection can also play a very significant secondary role. Utilizing judicious placement of radiation baffles, and a novel counterflow configuration, the approach proposed in this SBIR can accomplish the desired heat transfer between spent and fresh regolith with only one moving mechanical part, by making effective use of both radiative heat transfer and solids convection. Discrete-element simulations of regolith flow will be utilized to refine the concept. Utilization of an existing ~1.4 cubic meter partial-vacuum facility at the University of Florida will facilitate construction of feasibility demonstration prototypes during Phase-1 and/or Phase-2. The Phase-1 project will demonstrate the effectiveness of combining solids convection with radiative heat transfer to rapidly transfer heat from 1050C spent material to heat fresh regolith to 750C under vacuum conditions.