- API
Affordable Practical High-Efficiency Photovoltaic Concentrator Blanket Assembly for Ultra-Lightweight Solar Arrays Project
nasa-test-0.demo.socrata.com | Last Updated 2015-07-20T05:13:36.000ZDeployable Space Systems, Inc. (DSS) will focus the proposed NASA Phase 1 effort on the development of our innovative Functional Advanced Concentrator Technology (FACT). FACT is an affordable practical high-efficiency concentrator blanket assembly for ultra-lightweight solar arrays. FACT coupled to an ultra-lightweight solar array structural platform (such as DSS's ROSA) will provide game-changing performance metrics and unparalleled affordability for the end-user. FACT will enable emerging Solar Electric Propulsion (SEP) Space Science missions, and other NASA missions, through its ultra-affordability, high voltage operation capability, high/low temperature operation capability, high/low illumination operation capability, high radiation tolerance, ultra-lightweight, and ultra-compact stowage volume. Once completely optimized through the proposed Phase 1 and Phase 2 programs the FACT technology promises to provide NASA/industry a near-term and low-risk flexible blanket technology for advanced solar array systems that provides revolutionary performance in terms of high specific power / ultra-lightweight (>400-500 W/kg BOL at the array level & >1000 W/kg BOL at the blanket level, PV dependent), affordability (>50% cost savings at the array level), compact stowage volume (>80 kW/m3 BOL, 10X times better than current rigid panel arrays), high operation reliability, high radiation tolerance, high voltage operation capability (>150 VDC), scalability, and LILT & HIHT operation capability.
- API
Software for Application of HHT Technologies to Time Series Analysis Project
nasa-test-0.demo.socrata.com | Last Updated 2015-07-20T05:27:16.000ZThe proposed innovation is a robust and user-friendly software environment where NASA researchers can customize the latest HHT technologies for the LISA (and LIGO) application. The proposed technology will include the latest discoveries and inventions not available in the state-of-the-art. Its taxonomy includes gravitational sensors and sources, expert systems, portable data analysis tools, software development environments, and software tools for distributed analysis and simulation. The disturbance caused by the passage of a gravitational wave is expected to be very small and will be measured with laser interferometry. The Hilbert-HuangTransform (HHT)and related analysis technologies developed since the original concept has been used successfully in other applications to extract non-linear and transient signal comonents of very small magnitude with respect to the measured signal. The proposed research and development team has participated in the latest cycle of technology development related to the HHT at the theoretical, implementation, and application levels. Not only will the creation of the proposed software contribute to the data analysis of the gravitational wave signals in the laser interferometry measurements (for both LIGO and LISA data), but also in other applications within and outside NASA's mission.
- API
Additive Manufacturing Technology Development Project
nasa-test-0.demo.socrata.com | Last Updated 2015-07-20T05:39:10.000Z<p>The 3D Printing In Zero-G (3D Print) technology demonstration project is a proof-of-concept test designed to assess the properties of melt deposition modeling additive manufacturing in the microgravity environment experienced on the International Space Station (ISS). The lessons learned from this technology demonstration will be used for the next generation of melt deposition modeling in the permanent NanoRacks Additive Manufacturing Facility (AMF) as well as for any future additive manufacturing technology NASA plans to use, such as metals or electronics in-space manufacturing, on both the ISS and Deep Space Missions. This demonstration is the first step towards realizing a &ldquo;machine shop&rdquo; in space, a critical enabling component of any Deep Space Mission.</p><p>The 3D Print payload consists of a 3D printer (a two-axis extruder mobility system, a single-axis print tray mobility system, the extruder and accompanying feedstock cartridge, the print tray, Environmental Control Unit (ECU, a prototype for the permanent AMF), an electronics box, and all of the necessary cables and bolts to attach the device to the ISS Microgravity Science Glovebox&nbsp;(MSG) cold plate, MSG laptop computer, and MSG power supply) and all identified spare parts. The 3D Print payload will operate within the MSG. The payload uses extrusion-based additive manufacturing technology to fabricate objects. Additive manufacturing is the process of creating three dimensional objects from a Computer Aided Design (CAD) model where material is deposited layer by layer. The 3D Print payload will extrude a bead of thermo-polymer material from a larger diameter feedstock material. When one layer is complete, the next layer is printed on top and bonded to the lower layer while still molten. This creates an adhesive bond as opposed to a solid material extrusion.</p><p>Performance goals were defined realizing the 3D Print is a technology demonstration. The following is a list of minimum success criteria:<br />1. Successful integration and safe operation in the MSG on the ISS<br />2. Demonstration of extrusion based additive manufacturing using polymeric material<br />3. Successful extrusion and traversing<br />4. Printing of one part while in ISS microgravity<br />5. Mitigation of functional risks for future facilities<br />6. Comparison of ISS printed parts with those printed on Earth (dimensional and strength testing).</p>
- API
Vibration-Free Cooling Cycle Pump for Space Vehicles and Habitats Project
nasa-test-0.demo.socrata.com | Last Updated 2015-07-20T05:26:51.000ZMainstream Engineering Corporation completed the design of a high-speed pump for International Space Station (ISS) Environmental Control and Life Support Systems and future spacecraft and extraterrestrial outpost applications. Specifications for this pump were derived from an existing pump currently operating as part of the thermal control loop on the ISS. The design includes magnetic bearings so that a vibration-reducing control algorithm can be implemented. A digital controller was designed, which measured and reduced vibration-causing fluctuations in shaft displacement due to rotor unbalance in multiple axes. The controller was tested over an operating speed range of 600 to 7200 rpm with excellent results. The controller reduced mean shaft displacement by 71% over the entire operating range, and reduced it by more than 80% at higher operating speeds where synchronous vibration was dominant. In Phase II the magnetic bearing equipped cooling loop pump designed in Phase I will be fabricated and tested. Mainstream will demonstrate the added efficiency, reliability, and low vibration of the system as compared with the existing pump. The pump assembly will undergo vibration characterization testing with support from Marshall Space Flight Center.
- API
Global Navigation Satellite System (GNSS) IGS Clock Combination Product from Real-Time AC Submissions from NASA CDDIS
data.nasa.gov | Last Updated 2022-01-17T05:22:33.000ZThis derived product set consists of Global Navigation Satellite System satellite and receiver clock combination product (30-second granularity, daily files, generated daily) from the real-time IGS analysis center submissions available from NASA Crustal Dynamics Data Information System (CDDIS). GNSS provide autonomous geo-spatial positioning with global coverage. GNSS data sets from ground receivers at the CDDIS consist primarily of the data from the U.S. Global Positioning System (GPS) and the Russian GLObal NAvigation Satellite System (GLONASS). Since 2011, the CDDIS GNSS archive includes data from other GNSS (Europe’s Galileo, China’s Beidou, Japan’s Quasi-Zenith Satellite System/QZSS, the Indian Regional Navigation Satellite System/IRNSS, and worldwide Satellite Based Augmentation Systems/SBASs), which are similar to the U.S. GPS in terms of the satellite constellation, orbits, and signal structure. The CDDIS provides access to products generated from real-time data streams in support of the IGS Real-Time Service. The real-time observation data from a global permanent network of ground-based receivers are transmitted from the CDDIS in 1 to multi-second intervals in raw receiver or RTCM (Radio Technical Commission for Maritime Services) format. These real-time data are utilized to generate near real-time product streams. The real-time products consist of GNSS satellite orbit and clock corrections to the broadcast ephemeris. These correction streams are formatted according to the RTCM SSR standard for State Space Representation and are broadcast using the NTRIP protocol. IGS analysis centers (ACs) access GNSS real-time data streams to produce GNSS satellite and ground receiver clock values in real-time. The product streams are combination solutions generated by processing individual real-time solutions from participating IGS Real-time ACs. The IGS Real-Time Analysis Center Coordinator (RTACC) uses these individual AC solutions to generate this real-time IGS combined satellite and receiver clock product. The effect of combining the different AC solutions is a more reliable and stable performance than that of any single AC's product. This clock solution is a batch combination based on daily clock submissions by these IGS real-time analysis centers and have been provided since February 2009, shortly after real-time streams were routinely available through the IGS Real-Time Pilot Project and prior to the availability of real-time product streams. Clock solution files consist of decoded clock results from the real time stream at 30-second intervals. This combination is a daily solution available approximately one to three days after the end of the previous UTC day. All satellite and receiver clock solution files utilize the clock RINEX format and span 24 hours from 00:00 to 23:45 UTC.
- API
Global Navigation Satellite System (GNSS) Rapid Clock Product (30 second resolution, daily files, generated daily) from NASA CDDIS
data.nasa.gov | Last Updated 2023-02-28T19:25:38.000ZThis derived product set consists of Global Navigation Satellite System Rapid Satellite and Receiver Clock Product (30-second granularity, daily files, generated daily) from the NASA Crustal Dynamics Data Information System (CDDIS). GNSS provide autonomous geo-spatial positioning with global coverage. GNSS data sets from ground receivers at the CDDIS consist primarily of the data from the U.S. Global Positioning System (GPS) and the Russian GLObal NAvigation Satellite System (GLONASS). Since 2011, the CDDIS GNSS archive includes data from other GNSS (Europe’s Galileo, China’s Beidou, Japan’s Quasi-Zenith Satellite System/QZSS, the Indian Regional Navigation Satellite System/IRNSS, and worldwide Satellite Based Augmentation Systems/SBASs), which are similar to the U.S. GPS in terms of the satellite constellation, orbits, and signal structure. Analysis Centers (ACs) of the International GNSS Service (IGS) retrieve GNSS data on regular schedules to produce GNSS satellite and ground receiver clock values. The IGS Analysis Center Coordinator (ACC) uses these individual AC solutions to generate the official IGS rapid combined satellite and receiver clock products. The rapid combination is a daily solution available approximately 17 hours after the end of the previous UTC day. All satellite and receiver clock solution files utilize the clock RINEX format and span 24 hours from 00:00 to 23:45 UTC. For most applications the user of IGS products will not notice any significant differences between results obtained using the IGS Final and the IGS Rapid products.
- API
NOAA - Severe weather warnings for tornadoes: Storm based accuracy (%)
performance.commerce.gov | Last Updated 2024-03-28T20:34:54.000ZTornado Warnings are issued to enable the public to get out of harm’s way and mitigate preventable loss. NWS forecasters issue approximately 2,900 Tornado Warnings per year, primarily between the Rockies and Appalachian Mountains. Tornado Warning statistics are based on a comparison of warnings issued and weather spotter observations of tornadoes and/or storm damage surveys from Weather Forecast Offices in the United States. Accuracy or probability of detection (POD) is the percentage of time a tornado actually occurred in an area that was covered by a tornado warning. The difference between the accuracy percentage figure and 100% represents the percentage of events occurring without warning. Most tornadoes cannot be visually tracked from beginning to end and post-storm damage surveying is the official method with which the NWS categorizes tornado characteristics (intensity, path length & width) but must rely on radar data to estimate the timing of the tornado track.
- API
Stable, Extreme Temperature, High Radiation, Compact. Low Power Clock Oscillator for Space, Geothermal, Down-Hole & other High Reliability Applications Project
nasa-test-0.demo.socrata.com | Last Updated 2015-07-20T05:30:08.000ZEfficient and stable clock signal generation requirements at extreme temperatures (-180C to +450C)and radiation (&gt;250 Krad TID) are not met with the current solutions.Chronos technology proposes to design and fabricate RTXO as a new, comprehensive and scalable solution that simultaneously addresses the attributes of a reliable clock source in extreme environments. RTXO offers very small form-factor 5X7mm surface mount device utilizing high-Q Quartz material and CMOS/SOI for the extreme cold temperatures of Mars surface up to +110C. For extreme high temperature (to +450C) it uses Silicon Carbide (SiC-4H) semiconductor technology, high quality Gallium Orthophisphate (GaPO4) piezo-electric resonator material in a non-adhesive configured innovative assembly. All the different elements and processes used in the RTXO technology have been investigated in phase I to comply with the intended performance. This includes the individual elements, packaging, interconnecting method and manufacturing processes. RTXO offers standard signal interface, wide operating voltage range, conventional microelectronic packaging, and industry standard and reliable metal to metal as well as glass to metal sealing processes. RTXO delivers its exceptional performance over a wide (application specific) frequency range to 100 MHz from a single supply voltage and requires very low power.
- API
Workforce Innovation Opportunity Act (WIOA) Title III Performance Accountability Metrics PY 2017-2018 - Current Annual Labor and Industry
data.pa.gov | Last Updated 2022-06-09T15:50:25.000ZA comprehensive collection of data that assesses the effectiveness of Pennsylvania in achieving positive outcomes for individuals served by the workforce development system’s Title III Wagner-Peyser (Labor Exchange) program. Data is compiled in compliance with US Department of Labor’s Employment and Training Administration guidance on Workforce Innovation and Opportunity Act (WIOA) Performance Accountability. Data is available for the state and each of the CareerLink® offices in the commonwealth.
- API
Sanitary Sewer Spills - Strategic KPI
sharefulton.fultoncountyga.gov | Last Updated 2023-01-30T16:55:22.000ZThis measure tracks the number of sanitary sewer overflows reported by Fulton County. This measure currently applies only to the sanitary sewer system operated by Fulton County and does not include the City of Atlanta sewer system. A sanitary sewer overflow is a condition in which untreated sewage is released into the environment. Most overflows in the Fulton County system in recent years have been caused by blockages from debris or grease with roots often being a contributing or primary factor. Other causes have included physical failure of the sewer line and mechanical failure of pumps.