- API
Nano Dust Analyzer Project
data.nasa.gov | Last Updated 2020-01-29T04:54:41.000Z<p> We propose to develop a new highly sensitive instrument to confirm the existence of the so-called nano-dust particles, characterize their impact parameters, and measure their chemical composition. Simultaneous theoretical studies will be used to derive the expected&nbsp; mass and velocity ranges of these putative particles to formulate science and measurement requirements for the future deployment of&nbsp; the proposed Nano-Dust Analyzer (NDA)&nbsp;</p> <p> Early dust instruments onboard Pioneer 8 and 9 and Helios spacecraft detected a flow of submicron sized dust particles coming from the direction of the Sun. These particles originate in the inner solar system from mutual collisions among meteoroids and move on&nbsp; hyperbolic orbits that leave the Solar System under the prevailing radiation pressure force. Later dust instruments with higher&nbsp; sensitivity had to avoid looking toward the Sun because of interference from the solar wind and UV radiation and thus contributed&nbsp; little to the characterization of the dust stream. The one exception is the Ulysses dust detector that observed escaping dust particles&nbsp; high above the solar poles, which confirm the suspicion that charged nanometer sized dust grains are carried to high heliographic&nbsp; latitudes by electromagnetic interactions with the Interplanetary Magnetic Field (IMF). Recently, the STEREO WAVES instruments&nbsp; recorded a large number of intense electric field signals, which were interpreted as impacts from nanometer sized particles striking the&nbsp; spacecraft with velocities of about the solar wind speed. This high flux and strong spatial and/or temporal variations of nanometer&nbsp; sized dust grains at low latitude appears to be uncorrelated with the solar wind properties. This is a mystery as it would require that&nbsp; the total collisional meteoroid debris inside 1 AU is cast in nanometer sized fragments. The observed fluxes of inner-source pickup ions&nbsp; also point to the existence of a much enhanced dust population in the nanometer size range.&nbsp;</p> <p> This new heliospherical phenomenon of nano-dust streams may have consequences throughout the planetary system, but as of yet no dust instrument exists that could be used to shed light on their properties. &nbsp;We propose to develop a dust analyzer capable to detect and&nbsp; analyze these mysterious dust particles coming from the solar direction and to embark upon complementary theoretical studies to&nbsp; understand their characteristics. The instrument is based on the Cassini Dust Analyzer (CDA) that has analyzed the composition of&nbsp; nanometer sized dust particles emanating from the Jovian and Saturnian systems but could not be pointed towards the Sun. By&nbsp; applying technologies implemented in solar wind instruments and coronagraphs a highly sensitive dust analyzer will be developed and&nbsp; tested in the laboratory. The dust analyzer shall be able to characterize impact properties (impact charge and energy distribution of&nbsp; ions from which mass and speed of the impacting grains may be derived) and chemical composition of individual nanometer sized&nbsp; particles while exposed to solar wind and UV radiation. The measurements will enable us to identify the source of the dust by&nbsp; comparing their elemental composition with that of larger micrometeoroid particles of cometary and asteroid origin and will reveal&nbsp; interaction of nano-dust with the interplanetary medium by investigating the relation of the dust flux with solar wind and IMF&nbsp; properties.&nbsp;</p> <p> Complementary theoretically studies will be performed to understand the characteristics of nano-dust particles at 1 AU to answer the&nbsp; following questions:&nbsp; - What is the speed range at which nanometer sized particles impact
- API
Global Navigation Satellite System (GNSS) Rapid Clock Product (30 second resolution, daily files, generated daily) from NASA CDDIS
data.nasa.gov | Last Updated 2023-02-28T19:25:38.000ZThis derived product set consists of Global Navigation Satellite System Rapid Satellite and Receiver Clock Product (30-second granularity, daily files, generated daily) from the NASA Crustal Dynamics Data Information System (CDDIS). GNSS provide autonomous geo-spatial positioning with global coverage. GNSS data sets from ground receivers at the CDDIS consist primarily of the data from the U.S. Global Positioning System (GPS) and the Russian GLObal NAvigation Satellite System (GLONASS). Since 2011, the CDDIS GNSS archive includes data from other GNSS (Europe’s Galileo, China’s Beidou, Japan’s Quasi-Zenith Satellite System/QZSS, the Indian Regional Navigation Satellite System/IRNSS, and worldwide Satellite Based Augmentation Systems/SBASs), which are similar to the U.S. GPS in terms of the satellite constellation, orbits, and signal structure. Analysis Centers (ACs) of the International GNSS Service (IGS) retrieve GNSS data on regular schedules to produce GNSS satellite and ground receiver clock values. The IGS Analysis Center Coordinator (ACC) uses these individual AC solutions to generate the official IGS rapid combined satellite and receiver clock products. The rapid combination is a daily solution available approximately 17 hours after the end of the previous UTC day. All satellite and receiver clock solution files utilize the clock RINEX format and span 24 hours from 00:00 to 23:45 UTC. For most applications the user of IGS products will not notice any significant differences between results obtained using the IGS Final and the IGS Rapid products.
- API
Global Navigation Satellite System (GNSS) IGS Clock Combination Product from Real-Time AC Submissions from NASA CDDIS
data.nasa.gov | Last Updated 2022-01-17T05:22:33.000ZThis derived product set consists of Global Navigation Satellite System satellite and receiver clock combination product (30-second granularity, daily files, generated daily) from the real-time IGS analysis center submissions available from NASA Crustal Dynamics Data Information System (CDDIS). GNSS provide autonomous geo-spatial positioning with global coverage. GNSS data sets from ground receivers at the CDDIS consist primarily of the data from the U.S. Global Positioning System (GPS) and the Russian GLObal NAvigation Satellite System (GLONASS). Since 2011, the CDDIS GNSS archive includes data from other GNSS (Europe’s Galileo, China’s Beidou, Japan’s Quasi-Zenith Satellite System/QZSS, the Indian Regional Navigation Satellite System/IRNSS, and worldwide Satellite Based Augmentation Systems/SBASs), which are similar to the U.S. GPS in terms of the satellite constellation, orbits, and signal structure. The CDDIS provides access to products generated from real-time data streams in support of the IGS Real-Time Service. The real-time observation data from a global permanent network of ground-based receivers are transmitted from the CDDIS in 1 to multi-second intervals in raw receiver or RTCM (Radio Technical Commission for Maritime Services) format. These real-time data are utilized to generate near real-time product streams. The real-time products consist of GNSS satellite orbit and clock corrections to the broadcast ephemeris. These correction streams are formatted according to the RTCM SSR standard for State Space Representation and are broadcast using the NTRIP protocol. IGS analysis centers (ACs) access GNSS real-time data streams to produce GNSS satellite and ground receiver clock values in real-time. The product streams are combination solutions generated by processing individual real-time solutions from participating IGS Real-time ACs. The IGS Real-Time Analysis Center Coordinator (RTACC) uses these individual AC solutions to generate this real-time IGS combined satellite and receiver clock product. The effect of combining the different AC solutions is a more reliable and stable performance than that of any single AC's product. This clock solution is a batch combination based on daily clock submissions by these IGS real-time analysis centers and have been provided since February 2009, shortly after real-time streams were routinely available through the IGS Real-Time Pilot Project and prior to the availability of real-time product streams. Clock solution files consist of decoded clock results from the real time stream at 30-second intervals. This combination is a daily solution available approximately one to three days after the end of the previous UTC day. All satellite and receiver clock solution files utilize the clock RINEX format and span 24 hours from 00:00 to 23:45 UTC.
- API
Global Navigation Satellite System (GNSS) Final Clock Product (30 second resolution, daily files, generated weekly) from NASA CDDIS
data.nasa.gov | Last Updated 2023-02-28T19:25:26.000ZThis derived product set consists of Global Navigation Satellite System Final Satellite and Receiver Clock Product (30-second granularity, daily files, generated weekly) from the NASA Crustal Dynamics Data Information System (CDDIS). GNSS provide autonomous geo-spatial positioning with global coverage. GNSS data sets from ground receivers at the CDDIS consist primarily of the data from the U.S. Global Positioning System (GPS) and the Russian GLObal NAvigation Satellite System (GLONASS). Since 2011, the CDDIS GNSS archive includes data from other GNSS (Europe’s Galileo, China’s Beidou, Japan’s Quasi-Zenith Satellite System/QZSS, the Indian Regional Navigation Satellite System/IRNSS, and worldwide Satellite Based Augmentation Systems/SBASs), which are similar to the U.S. GPS in terms of the satellite constellation, orbits, and signal structure. Analysis Centers (ACs) of the International GNSS Service (IGS) retrieve GNSS data on regular schedules to produce GNSS satellite and ground receiver clock values. The IGS Analysis Center Coordinator (ACC) uses these individual AC solutions to generate the official IGS final combined satellite and receiver clock products. The final products are considered the most consistent and highest quality IGS solutions; they consist of daily orbit files, generated on a weekly basis with a delay up to 13 (for the last day of the week) to 20 (for the first day of the week) days. All satellite and receiver clock solution files utilize the clock RINEX format and span 24 hours from 00:00 to 23:45 UTC.
- API
Global gene expression analysis highlights microgravity sensitive key genes in soleus and EDL of 30 days space flown mice
data.nasa.gov | Last Updated 2023-01-26T18:49:58.000ZMicrogravity exposure as well as chronic muscle disuse are two of the main causes of physiological adaptive skeletal muscle atrophy in humans and murine animals in physiological condition. The aim of this study was to investigate at both morphological and global gene expression level skeletal muscle adaptation to microgravity in mouse soleus and extensor digitorum longus (EDL). Adult male mice C57BL/N6 were flown aboard the BION-M1 biosatellite for 30 days on orbit (BF) or housed in a replicate flight habitat on Earth (BG) as reference flight control. In this study we investigated for the first time gene expression adaptation to 30 days of microgravity exposure in mouse soleus and EDL highlighting potential new targets for improvement of countermeasures able to ameliorate or even prevent microgravity-induced atrophy in future spaceflights. Overall Design: C57BL/N6 mice were randomly divided in 3 groups: Bion Flown (BF) mice flown aboard the Bion M1 biosatellite in microgravity environment for 30 days; Bion Ground (BG) mice housed in the same habitat of flown animals but exposed to earth gravity; and Flight Control (FC) mice housed in a standard animal facility.
- API
Metrics for Evaluating Performance of Prognostic Techniques
data.nasa.gov | Last Updated 2020-01-29T03:23:28.000ZPrognostics is an emerging concept in condition basedmaintenance(CBM)ofcriticalsystems.Alongwith developing the fundamentals of being able to confidently predict Remaining Useful Life (RUL), the technology calls for fielded applications as it inches towards maturation. This requires a stringent performance evaluation so that the significance of the concept can be fully exploited. Currently, prognostics concepts lack standard definitions and suffer from ambiguous and inconsistent interpretations. This lack of standards is in part due to the varied end-user requirements for different applications, time scales, available information, domain dynamics, etc. to name a few issues. Instead, the research community has used a variety of metrics based largely on convenience with respect to their respective requirements. Very little attention has been focused on establishing a common ground to compare different efforts. This paper surveys the metrics that are already used for prognostics in a variety of domains including medicine, nuclear, automotive, aerospace, and electronics. It also considers other domains that involve prediction-related tasks, such as weather and finance. Differences and similarities between these domains and health maintenancehave been analyzed to help understand what performance evaluation methods may or may not be borrowed. Further, these metrics have been categorized in several ways that may be useful in deciding upon a suitable subset for a specific application. Some important prognostic concepts have been defined using a notational framework that enables interpretation of different metrics coherently. Last, but not the least, a list of metrics has been suggested to assess critical aspects of RUL predictions before they are fielded in real applications.
- API
Global Navigation Satellite System (GNSS) Rapid Orbit/Clock/ERP Product Summary from NASA CDDIS
data.nasa.gov | Last Updated 2023-03-01T00:51:24.000ZThis derived product set consists of Global Navigation Satellite System Rapid Orbit/Reference Frame Product Summary from the NASA Crustal Dynamics Data Information System (CDDIS). GNSS provide autonomous geo-spatial positioning with global coverage. GNSS data sets from ground receivers at the CDDIS consist primarily of the data from the U.S. Global Positioning System (GPS) and the Russian GLObal NAvigation Satellite System (GLONASS). Since 2011, the CDDIS GNSS archive includes data from other GNSS (Europe’s Galileo, China’s Beidou, Japan’s Quasi-Zenith Satellite System/QZSS, the Indian Regional Navigation Satellite System/IRNSS, and worldwide Satellite Based Augmentation Systems/SBASs), which are similar to the U.S. GPS in terms of the satellite constellation, orbits, and signal structure. Analysis Centers (ACs) of the International GNSS Service (IGS) retrieve GNSS data on regular schedules to produce GNSS satellite and ground receiver clock values. The IGS Analysis Center Coordinator (ACC) uses these individual AC solutions to generate the official IGS rapid combined orbit, satellite and receiver clock, and ERP products. The rapid combination is a daily solution available approximately 17 hours after the end of the previous UTC day. All satellite and receiver clock solution files utilize the clock RINEX format and span 24 hours from 00:00 to 23:45 UTC. The solution summary file details information about the generation of the daily rapid products.
- API
Metrics for Offline Evaluation of Prognostic Performance
data.nasa.gov | Last Updated 2020-01-29T01:57:42.000ZPrognostic performance evaluation has gained significant attention in the past few years.*Currently, prognostics concepts lack standard definitions and suffer from ambiguous and inconsistent interpretations. This lack of standards is in part due to the varied end- user requirements for different applications, time scales, available information, domain dynamics, etc. to name a few. The research community has used a variety of metrics largely based on convenience and their respective requirements. Very little attention has been focused on establishing a standardized approach to compare different efforts. This paper presents several new evaluation metrics tailored for prognostics that were recently introduced and were shown to effectively evaluate various algorithms as compared to other conventional metrics. Specifically, this paper presents a detailed discussion on how these metrics should be interpreted and used. These metrics have the capability of incorporating probabilistic uncertainty estimates from prognostic algorithms. In addition to quantitative assessment they also offer a comprehensive visual perspective that can be used in designing the prognostic system. Several methods are suggested to customize these metrics for different applications. Guidelines are provided to help choose one method over another based on distribution characteristics. Various issues faced by prognostics and its performance evaluation are discussed followed by a formal notational framework to help standardize subsequent developments.
- API
ORACLES Navigational and Meteorological Data
data.nasa.gov | Last Updated 2022-08-22T13:04:33.000ZORACLES_MetNav_AircraftInSitu_Data are in situ meteorological and navigational measurements collected onboard the P-3 Orion or ER-2 aircraft during the ObseRvations of Aerosols above CLouds and their intEractionS (ORACLES) campaign. These measurements were collected from August 19, 2016 – October 27, 2016, August 1, 2017 – September 4, 2017 and September 21, 2018 – October 27, 2018. ORACLES provides multi-year airborne observations over the complete vertical column of key parameters that drive aerosol-cloud interactions in the southeast Atlantic, an area with some of the largest inter-model differences in aerosol forcing assessments on the planet. The P-3 Orion aircraft was utilized as a low-flying platform for simultaneous in situ and remote sensing measurements of aerosols and clouds and was supplemented by ER-2 remote sensing during the 2016 campaign. Data collection for this product is complete. Southern Africa produces almost one-third of the Earth’s biomass burning aerosol particles. The ORACLES (ObseRvations of Aerosols above CLouds and their intEractionS) experiment was a five year investigation with three intensive observation periods (August 19, 2016 – October 27, 2016; August 1, 2017 – September 4, 2017; September 21, 2018 – October 27, 2018) and was designed to study key processes that determine the climate impacts of African biomass burning aerosols. ORACLES provided multi-year airborne observations over the complete vertical column of the key parameters that drive aerosol-cloud interactions in the southeast Atlantic, an area with some of the largest inter-model differences in aerosol forcing assessments. These inter-model differences in aerosol and cloud distributions, as well as their combined climatic effects in the SE Atlantic are partly due to the persistence of aerosols above clouds. The varying separation of cloud and aerosol layers sampled during ORACLES allow for a process-oriented understanding of how variations in radiative heating profiles impact cloud properties, which is expected to improve model simulations for other remote regions experience long-range aerosol transport above clouds. ORACLES utilized two NASA aircraft, the P-3 and ER-2. The P-3 was used as a low-flying platform for simultaneous in situ and remote sensing measurements of aerosols and clouds in all three campaigns, supplemented by ER-2 remote sensing in 2016. ER-2 observations will be used to enhance satellite-based remote sensing by resolving variability within a particular scene, and by guiding the development of new and improved remote sensing techniques.
- API
Metagenomic analysis of feces from mice flown on the RR-6 mission
data.nasa.gov | Last Updated 2023-01-26T18:46:14.000ZThe objective of the Rodent Research-6 (RR-6) study was to evaluate muscle atrophy in mice during spaceflight and to test the efficacy of a novel therapeutic to mitigate muscle wasting. The experiment involved an implantable subcutaneous nanochannel delivery system (nDS; between scapula) which delivered the drug formoterol (FMT; a selective xce xb22 adrenoceptor agonist) over the course of time. To this end a cohort of forty 32-weeks-old female C57BL/6NTac mice were either sham operated or implanted with vehicle or treatment-filled nDS launched in two Transporters (20 mice per Transporter) on SpaceX-13 on December 15 2017. They were transferred to Rodent Habitats onboard the International Space Station (ISS) and maintained in microgravity for 29 days (N=20 Live Animal Return Spaceflight [LAR FLT]) or >50 days (N=20 ISS Terminal Spaceflight [ISS-T FLT]). After 29 days the 20 LAR FLT animals were returned live to back to Earth on January 13 2018. After splashdown the animals were ambulatory on-ground for ~4 days until all subjects were processed during one day of dissections. There were two Basal (BSL) groups of animals sacrificed (LAR BSL & ISS-T BSL; N=20; 40 animals; ~36 weeks old) at Kennedy Space Center (KSC; 12/9/17). LAR BSL animals were dissected and samples were collected upon euthanasia. A Ground Control (GC) group LAR GC mimicked the LAR FLT group which was housed at KSC then shipped alive to Novartis xe2 x80 x99s Facilities where both the LAR FLT and LAR GC groups were processed (~41 weeks old; 1/16/18). All were anesthetized with isoflurane blood samples were obtained by closed-chest cardiac puncture and the animals were euthanized by exsanguination and thoracotomy. The 20 ISS-T FLT mice were anesthetized via intraperitoneal injection of ketamine/xylazine/acepromazine over the course of a four days of dissections (2/6/18 until 2/9/18; 53-56 days after launch; 44 weeks old at time of on-orbit dissections). Blood samples and euthanasia were conducted the same as LAR groups. Following blood draw and hind limb dissection the ISS-T FLT animal carcasses were wrapped in aluminum foil placed in a ziploc bag and placed in storage at -80 xcb x9aC or colder until return. The ISS-T Ground Control (ISS-T GC) (at KSC) followed the same euthanasia timeline methods and preservation. The final processing of frozen ISS-T FLT frozen ISS-T GC and frozen 0-day ISS-T BSL animals were completed at Houston Methodist Research Institute in Houston TX (5/21/18 until 5/24/18). GeneLab received feces from only sham treated animals (no drug treated animals) from the following groups. FLT: LAR (n=9) ISS-T (n=7); GC: LAR (N=7) ISS-T (N=9); BSL: LAR (n=7) ISS-T (n=9). DNA was extracted and analyzed by sequencing using a variety of different targeted and un-targeted metagenome profiling assays.