The land area of San Francisco, CA was 47 in 2018. The land area of Denver, CO was 153 in 2018.
Land Area
Water Area
Land area is a measurement providing the size, in square miles, of the land portions of geographic entities for which the Census Bureau tabulates and disseminates data. Area is calculated from the specific boundary recorded for each entity in the Census Bureau's geographic database. Land area is based on current information in the TIGER® data base, calculated for use with Census 2010.
Water Area figures include inland, coastal, Great Lakes, and territorial sea water. Inland water consists of any lake, reservoir, pond, or similar body of water that is recorded in the Census Bureau's geographic database. It also includes any river, creek, canal, stream, or similar feature that is recorded in that database as a two- dimensional feature (rather than as a single line). The portions of the oceans and related large embayments (such as Chesapeake Bay and Puget Sound), the Gulf of Mexico, and the Caribbean Sea that belong to the United States and its territories are classified as coastal and territorial waters; the Great Lakes are treated as a separate water entity. Rivers and bays that empty into these bodies of water are treated as inland water from the point beyond which they are narrower than 1 nautical mile across. Identification of land and inland, coastal, territorial, and Great Lakes waters is for data presentation purposes only and does not necessarily reflect their legal definitions.
Above charts are based on data from the U.S. Census American Community Survey | ODN Dataset | API -
Geographic and Area Datasets Involving Denver, CO or San Francisco, CA
- API
San Mateo County And California Crime Rates 2000-2014
performance.smcgov.org | Last Updated 2016-08-31T20:40:07.000ZViolent and property crime rates per 100,000 population for San Mateo County and the State of California. The total crimes used to calculate the rates for San Mateo County include data from: Sheriff's Department Unincorporated, Atherton, Belmont, Brisbane, Broadmoor, Burlingame, Colma, Daly City, East Palo Alto, Foster City, Half Moon Bay, Hillsborough, Menlo Park, Millbrae, Pacifica, Redwood City, San Bruno, San Carlos, San Mateo, South San Francisco, Bay Area DPR, BART, Union Pacific Railroad, and CA Highway Patrol.
- API
Next Generation Simulation (NGSIM) Vehicle Trajectories and Supporting Data
datahub.transportation.gov | Last Updated 2024-05-20T18:02:47.000ZClick “Export” on the right to download the vehicle trajectory data. The associated metadata and additional data can be downloaded below under "Attachments". Researchers for the Next Generation Simulation (NGSIM) program collected detailed vehicle trajectory data on southbound US 101 and Lankershim Boulevard in Los Angeles, CA, eastbound I-80 in Emeryville, CA and Peachtree Street in Atlanta, Georgia. Data was collected through a network of synchronized digital video cameras. NGVIDEO, a customized software application developed for the NGSIM program, transcribed the vehicle trajectory data from the video. This vehicle trajectory data provided the precise location of each vehicle within the study area every one-tenth of a second, resulting in detailed lane positions and locations relative to other vehicles. Click the "Show More" button below to find additional contextual data and metadata for this dataset. For site-specific NGSIM video file datasets, please see the following: - NGSIM I-80 Videos: https://data.transportation.gov/Automobiles/Next-Generation-Simulation-NGSIM-Program-I-80-Vide/2577-gpny - NGSIM US-101 Videos: https://data.transportation.gov/Automobiles/Next-Generation-Simulation-NGSIM-Program-US-101-Vi/4qzi-thur - NGSIM Lankershim Boulevard Videos: https://data.transportation.gov/Automobiles/Next-Generation-Simulation-NGSIM-Program-Lankershi/uv3e-y54k - NGSIM Peachtree Street Videos: https://data.transportation.gov/Automobiles/Next-Generation-Simulation-NGSIM-Program-Peachtree/mupt-aksf
- API
County to CBSA Mapping for Large Metros
data.bayareametro.gov | Last Updated 2022-08-26T07:12:04.000ZData contains counties in the following list of CBSAS (per OMB Mar 2020 definition): Bay Area CBSAs: San Francisco-Oakland-Berkeley, CA San Jose-Sunnyvale-Santa Clara, CA Napa, CA Santa Rosa-Petaluma, CA Other CBSAs: Los Angeles-Long Beach-Anaheim, CA Washington-Arlington-Alexandria, DC-VA-MD-WV Denver-Aurora-Lakewood, CO Detroit-Warren-Dearborn, MI Philadelphia-Camden-Wilmington, PA-NJ-DE-MD Boston-Cambridge-Newton, MA-NH New York-Newark-Jersey City, NY-NJ-PA Phoenix-Mesa-Chandler, AZ Houston-The Woodlands-Sugar Land, TX Seattle-Tacoma-Bellevue, WA Atlanta-Sandy Springs-Alpharetta, GA Chicago-Naperville-Elgin, IL-IN-WI Austin-Round Rock-Georgetown, TX Dallas-Fort Worth-Arlington, TX Miami-Fort Lauderdale-Pompano Beach, FL
- API
Vital Signs: Migration - Bay Area
data.bayareametro.gov | Last Updated 2019-10-25T20:40:04.000ZVITAL SIGNS INDICATOR Migration (EQ4) FULL MEASURE NAME Migration flows LAST UPDATED December 2018 DESCRIPTION Migration refers to the movement of people from one location to another, typically crossing a county or regional boundary. Migration captures both voluntary relocation – for example, moving to another region for a better job or lower home prices – and involuntary relocation as a result of displacement. The dataset includes metropolitan area, regional, and county tables. DATA SOURCE American Community Survey County-to-County Migration Flows 2012-2015 5-year rolling average http://www.census.gov/topics/population/migration/data/tables.All.html CONTACT INFORMATION vitalsigns.info@bayareametro.gov METHODOLOGY NOTES (across all datasets for this indicator) Data for migration comes from the American Community Survey; county-to-county flow datasets experience a longer lag time than other standard datasets available in FactFinder. 5-year rolling average data was used for migration for all geographies, as the Census Bureau does not release 1-year annual data. Data is not available at any geography below the county level; note that flows that are relatively small on the county level are often within the margin of error. The metropolitan area comparison was performed for the nine-county San Francisco Bay Area, in addition to the primary MSAs for the nine other major metropolitan areas, by aggregating county data based on current metropolitan area boundaries. Data prior to 2011 is not available on Vital Signs due to inconsistent Census formats and a lack of net migration statistics for prior years. Only counties with a non-negligible flow are shown in the data; all other pairs can be assumed to have zero migration. Given that the vast majority of migration out of the region was to other counties in California, California counties were bundled into the following regions for simplicity: Bay Area: Alameda, Contra Costa, Marin, Napa, San Francisco, San Mateo, Santa Clara, Solano, Sonoma Central Coast: Monterey, San Benito, San Luis Obispo, Santa Barbara, Santa Cruz Central Valley: Fresno, Kern, Kings, Madera, Merced, Tulare Los Angeles + Inland Empire: Imperial, Los Angeles, Orange, Riverside, San Bernardino, Ventura Sacramento: El Dorado, Placer, Sacramento, Sutter, Yolo, Yuba San Diego: San Diego San Joaquin Valley: San Joaquin, Stanislaus Rural: all other counties (23) One key limitation of the American Community Survey migration data is that it is not able to track emigration (movement of current U.S. residents to other countries). This is despite the fact that it is able to quantify immigration (movement of foreign residents to the U.S.), generally by continent of origin. Thus the Vital Signs analysis focuses primarily on net domestic migration, while still specifically citing in-migration flows from countries abroad based on data availability.
- API
ART Bay Area Inundation Scenario - 77" Sea Level Rise
data.bayareametro.gov | Last Updated 2023-06-09T00:15:10.000ZInundation feature set representing areas vulnerable to a 77 inch rise in sea level for the San Francisco Bay Region. This is a derivative feature set, assembled by the Metropolitan Transportation Commission (MTC), created by merging county-specific, land-only inundation feature sets. The source, county-level feature sets were produced for Adapting to Rising Tides (ART), a program led by the San Francisco Bay Conservation and Development Commission (BCDC), in September 2017. The sea level rise (SLR) scenario used to produce this data represents 77 inches (a little less than six and one-half feet) of water level above the current mean higher high water (MHHW) tidal datum. This is also considered equivalent to 36 inches of SLR plus a 100-year extreme tide. The polygons contain the extent and depth of land-only inundation (in feet) flooding of the bayside shoreline. Depth of flooding were created by subtracting a land surface Digital Elevation Model (DEM) from the water surface DEM representing the SLR scenario (MHHW + SLR). Extent of flooding were created by employing a two rule assessment to determine if an area is inundated. It must be below the assigned water surface DEM elevation value, and it must be connected to an adjacent area that was either flooded or open water. This method applies an "eight-side rule" for connectedness, where the area is considered "connected" if any of its cardinal or diagonal directions is connected to a flooded area or open water. Hydraulic connectivity assessment removes areas from the inundation zone if they are protected by levees or other topographic features that prevent inland inundation. This assessment also removed areas that are low lying but inland and not directly connected to an adjacent inundated area. The 77 inch SLR scenario can be used to approximate all extreme tide/sea level rise combinations that produce a water level in the range of MHHW + 74 inches to MHHW + 80 inches, including: - 77 inches of SLR; - 1-year extreme tide event coupled with 66 inches of SLR; - 2-year extreme tide event coupled with 60 inches of SLR; - 5-year extreme tide event coupled with 54 inches of SLR; - 10-year extreme tide event coupled with 52 inches of SLR; - 25-year extreme tide event coupled with 48 inches of SLR; - 50-year extreme tide event coupled with 42 inches of SLR, and - 100-year extreme tide event coupled with 36 inches of SLR. **In 2019, The San Francisco Bay Conservation and Development Commission released additional data to add East Contra Costa and Solano areas to the existing, 2017 data that focused on San Francisco Bay. This update did not include all the sea level scenarios produced in 2017. The 77-inch scenario was one of the ones for which data for East Contra Costa and Solano was not produced.** Source Data Produced: September 2017 MTC Publication Date: June 2019 Status: Progress: Complete Maintenance and Update Frequency: None planned Contact Information: Contact Organization: Metropolitan Transportation Commission Contact Person: Data & Visualization Contact Address: Address Type: mailing and physical Address: 375 Beale Street, Suite 800 City: San Francisco State or Province: California Postal Code: 94105 Country: United States of America Contact Voice Telephone: (415) 778-6700 Contact Electronic Mail Address: dataviz@bayareametro.gov Hours: 9:00 AM - 5:00 PM (PST) Monday through Friday
- API
ART Bay Area Inundation Scenario - 36" Sea Level Rise
data.bayareametro.gov | Last Updated 2023-06-09T00:07:18.000ZInundation feature set representing areas vulnerable to a 36 inch rise in sea level for the San Francisco Bay Region. This is a derivative feature set, assembled by the Metropolitan Transportation Commission (MTC), created by merging county-specific, land-only inundation feature sets. The source, county-level feature sets were produced for Adapting to Rising Tides (ART), a program led by the San Francisco Bay Conservation and Development Commission (BCDC), in September 2017. The sea level rise (SLR) scenario used to produce this data represents 36 inches (three feet) of water level above the current mean higher high water (MHHW) tidal datum. This is considered the most likely level of sea level rise expected by 2100; or an existing 50-year extreme tide. The polygons contain the extent and depth of land-only inundation (in feet) flooding of the bayside shoreline. Depth of flooding were created by subtracting a land surface Digital Elevation Model (DEM) from the water surface DEM representing the SLR scenario (MHHW + SLR). Extent of flooding were created by employing a two rule assessment to determine if an area is inundated. It must be below the assigned water surface DEM elevation value, and it must be connected to an adjacent area that was either flooded or open water. This method applies an "eight-side rule" for connectedness, where the area is considered "connected" if any of its cardinal or diagonal directions is connected to a flooded area or open water. Hydraulic connectivity assessment removes areas from the inundation zone if they are protected by levees or other topographic features that prevent inland inundation. This assessment also removed areas that are low lying but inland and not directly connected to an adjacent inundated area. The 36 inch SLR scenario can be used to approximate all extreme tide/sea level rise combinations that produce a water level in the range of MHHW + 33 inches to MHHW + 39 inches, including: - 36 inches of SLR; - 1-year extreme tide event coupled with 24 inches of SLR; - 2-year extreme tide event coupled with 18 inches of SLR; - 5-year extreme tide event coupled with 12 inches of SLR; - 25-year extreme tide event coupled with 6 inches of SLR, and - 50-year extreme tide event under existing conditions (no SLR). Publication Date: June 2019 Creation Date: March 2019 Status: Progress: Complete Maintenance and Update Frequency: None planned Contact Information: Contact Organization: Metropolitan Transportation Commission Contact Person: Data & Visualization Contact Address: Address Type: mailing and physical Address: 375 Beale Street, Suite 800 City: San Francisco State or Province: California Postal Code: 94105 Country: United States of America Contact Voice Telephone: (415) 778-6700 Contact Electronic Mail Address: dataviz@bayareametro.gov Hours: 9:00 AM - 5:00 PM (PST) Monday through Friday
- API
Unemployment Rate by City (2022) DRAFT
data.bayareametro.gov | Last Updated 2023-06-13T17:54:16.000ZVITAL SIGNS INDICATOR Unemployment (EC3) FULL MEASURE NAME Unemployment rate by residential location LAST UPDATED December 2022 DESCRIPTION Unemployment refers to the share of the labor force – by place of residence – that is not currently employed full-time or part-time. The unemployment rate reflects the strength of the overall employment market. DATA SOURCE California Employment Development Department: Historical Unemployment Rates 1990-2010 Spreadsheet provided by CAEDD California Employment Development Department: Labor Force and Unemployment Rate for California Sub-County Areas - https://data.edd.ca.gov/Labor-Force-and-Unemployment-Rates/Labor-Force-and-Unemployment-Rate-for-California-S/8z4h-2ak6 2010-2022 California Employment Development Department: Local Area Unemployment Statistics (LAUS) - https://data.edd.ca.gov/Labor-Force-and-Unemployment-Rates/Local-Area-Unemployment-Statistics-LAUS-/e6gw-gvii 1990-2022 U.S. Bureau of Labor Statistics: Local Area Unemployment Statistics (LAUS) - https://download.bls.gov/pub/time.series/la 1990-2021 CONTACT INFORMATION vitalsigns.info@bayareametro.gov METHODOLOGY NOTES (across all datasets for this indicator) Unemployment rates produced by the CA Employment Development Department (EDD) for the region and county levels are not adjusted for seasonality (as they reflect annual data) and are final data (i.e., not preliminary). Unemployment rates produced by U.S. Bureau of Labor Statistics (BLS) for the metro regions are annual and not adjusted for seasonality; they reflect the primary metropolitan statistical area (MSA) for the named region, except for the San Francisco Bay Area which uses the nine-county region. The unemployment rate is calculated based on the number of unemployed persons divided by the total labor force. Note that the unemployment rate can decline or increase as a result of changes in either variable.
- API
Unemployment Rate - Bay Area (2022) DRAFT
data.bayareametro.gov | Last Updated 2023-06-13T17:54:15.000ZVITAL SIGNS INDICATOR Unemployment (EC3) FULL MEASURE NAME Unemployment rate by residential location LAST UPDATED December 2022 DESCRIPTION Unemployment refers to the share of the labor force – by place of residence – that is not currently employed full-time or part-time. The unemployment rate reflects the strength of the overall employment market. DATA SOURCE California Employment Development Department: Historical Unemployment Rates 1990-2010 Spreadsheet provided by CAEDD California Employment Development Department: Labor Force and Unemployment Rate for California Sub-County Areas - https://data.edd.ca.gov/Labor-Force-and-Unemployment-Rates/Labor-Force-and-Unemployment-Rate-for-California-S/8z4h-2ak6 2010-2022 California Employment Development Department: Local Area Unemployment Statistics (LAUS) - https://data.edd.ca.gov/Labor-Force-and-Unemployment-Rates/Local-Area-Unemployment-Statistics-LAUS-/e6gw-gvii 1990-2022 U.S. Bureau of Labor Statistics: Local Area Unemployment Statistics (LAUS) - https://download.bls.gov/pub/time.series/la 1990-2021 CONTACT INFORMATION vitalsigns.info@bayareametro.gov METHODOLOGY NOTES (across all datasets for this indicator) Unemployment rates produced by the CA Employment Development Department (EDD) for the region and county levels are not adjusted for seasonality (as they reflect annual data) and are final data (i.e., not preliminary). Unemployment rates produced by U.S. Bureau of Labor Statistics (BLS) for the metro regions are annual and not adjusted for seasonality; they reflect the primary metropolitan statistical area (MSA) for the named region, except for the San Francisco Bay Area which uses the nine-county region. The unemployment rate is calculated based on the number of unemployed persons divided by the total labor force. Note that the unemployment rate can decline or increase as a result of changes in either variable.
- API
Unemployment Rate by County (2022) DRAFT
data.bayareametro.gov | Last Updated 2023-06-13T17:54:15.000ZVITAL SIGNS INDICATOR Unemployment (EC3) FULL MEASURE NAME Unemployment rate by residential location LAST UPDATED December 2022 DESCRIPTION Unemployment refers to the share of the labor force – by place of residence – that is not currently employed full-time or part-time. The unemployment rate reflects the strength of the overall employment market. DATA SOURCE California Employment Development Department: Historical Unemployment Rates 1990-2010 Spreadsheet provided by CAEDD California Employment Development Department: Labor Force and Unemployment Rate for California Sub-County Areas - https://data.edd.ca.gov/Labor-Force-and-Unemployment-Rates/Labor-Force-and-Unemployment-Rate-for-California-S/8z4h-2ak6 2010-2022 California Employment Development Department: Local Area Unemployment Statistics (LAUS) - https://data.edd.ca.gov/Labor-Force-and-Unemployment-Rates/Local-Area-Unemployment-Statistics-LAUS-/e6gw-gvii 1990-2022 U.S. Bureau of Labor Statistics: Local Area Unemployment Statistics (LAUS) - https://download.bls.gov/pub/time.series/la 1990-2021 CONTACT INFORMATION vitalsigns.info@bayareametro.gov METHODOLOGY NOTES (across all datasets for this indicator) Unemployment rates produced by the CA Employment Development Department (EDD) for the region and county levels are not adjusted for seasonality (as they reflect annual data) and are final data (i.e., not preliminary). Unemployment rates produced by U.S. Bureau of Labor Statistics (BLS) for the metro regions are annual and not adjusted for seasonality; they reflect the primary metropolitan statistical area (MSA) for the named region, except for the San Francisco Bay Area which uses the nine-county region. The unemployment rate is calculated based on the number of unemployed persons divided by the total labor force. Note that the unemployment rate can decline or increase as a result of changes in either variable.
- API
Unemployment Rate by Metro Area (2022) DRAFT
data.bayareametro.gov | Last Updated 2023-06-13T17:54:17.000ZVITAL SIGNS INDICATOR Unemployment (EC3) FULL MEASURE NAME Unemployment rate by residential location LAST UPDATED December 2022 DESCRIPTION Unemployment refers to the share of the labor force – by place of residence – that is not currently employed full-time or part-time. The unemployment rate reflects the strength of the overall employment market. DATA SOURCE California Employment Development Department: Historical Unemployment Rates 1990-2010 Spreadsheet provided by CAEDD California Employment Development Department: Labor Force and Unemployment Rate for California Sub-County Areas - https://data.edd.ca.gov/Labor-Force-and-Unemployment-Rates/Labor-Force-and-Unemployment-Rate-for-California-S/8z4h-2ak6 2010-2022 California Employment Development Department: Local Area Unemployment Statistics (LAUS) - https://data.edd.ca.gov/Labor-Force-and-Unemployment-Rates/Local-Area-Unemployment-Statistics-LAUS-/e6gw-gvii 1990-2022 U.S. Bureau of Labor Statistics: Local Area Unemployment Statistics (LAUS) - https://download.bls.gov/pub/time.series/la 1990-2021 CONTACT INFORMATION vitalsigns.info@bayareametro.gov METHODOLOGY NOTES (across all datasets for this indicator) Unemployment rates produced by the CA Employment Development Department (EDD) for the region and county levels are not adjusted for seasonality (as they reflect annual data) and are final data (i.e., not preliminary). Unemployment rates produced by U.S. Bureau of Labor Statistics (BLS) for the metro regions are annual and not adjusted for seasonality; they reflect the primary metropolitan statistical area (MSA) for the named region, except for the San Francisco Bay Area which uses the nine-county region. The unemployment rate is calculated based on the number of unemployed persons divided by the total labor force. Note that the unemployment rate can decline or increase as a result of changes in either variable.