The land area of Southwood Acres, CT was 4 in 2010.
Land Area
Water Area
Land area is a measurement providing the size, in square miles, of the land portions of geographic entities for which the Census Bureau tabulates and disseminates data. Area is calculated from the specific boundary recorded for each entity in the Census Bureau's geographic database. Land area is based on current information in the TIGER® data base, calculated for use with Census 2010.
Water Area figures include inland, coastal, Great Lakes, and territorial sea water. Inland water consists of any lake, reservoir, pond, or similar body of water that is recorded in the Census Bureau's geographic database. It also includes any river, creek, canal, stream, or similar feature that is recorded in that database as a two- dimensional feature (rather than as a single line). The portions of the oceans and related large embayments (such as Chesapeake Bay and Puget Sound), the Gulf of Mexico, and the Caribbean Sea that belong to the United States and its territories are classified as coastal and territorial waters; the Great Lakes are treated as a separate water entity. Rivers and bays that empty into these bodies of water are treated as inland water from the point beyond which they are narrower than 1 nautical mile across. Identification of land and inland, coastal, territorial, and Great Lakes waters is for data presentation purposes only and does not necessarily reflect their legal definitions.
Above charts are based on data from the U.S. Census American Community Survey | ODN Dataset | API -
Geographic and Area Datasets Involving Southwood Acres, CT
- API
Spill Incidents from January 1, 1996 to June 30, 2022
data.ct.gov | Last Updated 2024-08-29T15:53:43.000ZNote: Please use this link to leave the data view and to see the full description: https://data.ct.gov/Environment-and-Natural-Resources/Spill-Incidents/wr2a-rnsg Description of Dataset: This data set represents information reported between July 1, 1996 and June 30, 2022 to the Department of Energy and Environmental Protection (CT DEEP), generally to the CT DEEP Dispatch Center, regarding releases of substances to the environment, generally through accidental spills. For information related to releases reported to CT DEEP from July 1, 2022 to the present, go to Incident Reports for Releases Reported to CT DEEP July 1, 2022 to present at: https://connecticut.hazconnect.com/listincidentpublic.aspx For a dataset related to releases reported to CT DEEP from July 1, 2022 to recent refer to the CT Open Data dataset: https://data.ct.gov/Environment-and-Natural-Resources/Spill-Incidents-from-July-1-2022-to-Recent-for-Dow/ffju-s5c5 Connecticut General Statutes Section 22a-450 requires anyone who causes any discharge, spillage, uncontrolled loss, seepage or filtration of oil or petroleum or chemical liquids or solid, liquid or gaseous products, or hazardous wastes which poses a potential threat to human health or the environment to report that release to the CT DEEP. Reports of releases from other persons are also included in this dataset. Examples of what may be included in a spill incident record includes: Administrative information (unique spill case number). Spill date/time. Location. Spill source and cause. Material(s) and material type spilled. Quantity spilled. Measurement units. Surface water bodies affected. Data limitations and factors to consider when using this data: This data is limited to information about a spill incident as it was known at the time it was reported to CT DEEP. Although some data reflects updated information after the time of the initial notification, CT DEEP is unable to field check and verify all reported information. Therefore, information later determined to be incomplete or inaccurate may exist in this data set. There may also be spelling errors or other unintentionally inaccurate data that was transcribed in the spill incident report. This dataset is a subset of records and information that may be available about releases that have occurred at specific locations. This dataset does not replace a full review of files publicly available either on-line and/or at CT DEEP’s Records Center. For a complete review of agency records for this or other agency programs, you can perform your own search in our DEEP public file room located at 79 Elm Street, Hartford CT or at our DEEP Online Search Portal at: https://filings.deep.ct.gov/DEEPDocumentSearchPortal/Home . If errors are found or there are questions about the data, please contact the program unit using the following email address: DEEP.SpillsDocs@ct.gov
- API
DWR Dam Safety Non-Jurisdictional Dam
data.colorado.gov | Last Updated 2024-09-23T06:02:39.000ZA Non-Jurisdictional Dam is a dam creating a reservoir with a capacity of 100 acre-feet or less and a surface area of 20 acres or less and with a height measured as defined in Rules 4.2.5.1 and 4.2.19 of 10 feet or less. Non-jurisdictional size dams are regulated and subject to the authority of the State Engineer consistent with sections 37- 87-102 and 37-87-105 C.R.S.
- API
CT Occupational Employment & Wages (OES) - 2022-Q1
data.ct.gov | Last Updated 2024-08-06T15:55:11.000ZThe Connecticut Occupational Employment and Wage data provides employment and wage data by occupation and is based on the results of the Occupational Employment Statistics (OES) survey. The OES program conducts a bi-annual mail survey designed to produce estimates of employment and wages for over 800 occupations. These estimates are generated at the national, state, and metropolitan area levels. For more information, please visit us at http://www1.ctdol.state.ct.us/lmi/wages/default.asp.
- API
DWR Dam Safety Jurisdictional Dam
data.colorado.gov | Last Updated 2024-09-23T06:04:39.000ZA Jurisdictional Dam is a dam creating a reservoir with a capacity of more than 100 acre-feet, or creates a reservoir with a surface area in excess of 20 acres at the high-water line, or exceeds 10 feet in height measured vertically from the elevation of the lowest point of the natural surface of the ground where that point occurs along the longitudinal centerline of the dam up to the crest of the emergency spillway of the dam. For reservoirs created by excavation, or where the invert of the outlet conduit is placed below the surface of the natural ground at its lowest point beneath the dam, the jurisdictional height shall be measured from the invert of the outlet at the longitudinal centerline of the embankment or from the bottom of the excavation at the longitudinal centerline of the dam, whichever is greatest. Jurisdictional height is defined in Rule 4.2.19. The State Engineer shall have final authority over determination of the jurisdictional height of the dam.
- API
CT Department of Labor, Office of Research - LAUS Substate June 2023
data.ct.gov | Last Updated 2024-07-22T13:02:41.000ZThe Local Area Unemployment Statistics (LAUS) program produces monthly employment, unemployment, and labor force data for Census regions and divisions, States, counties, metropolitan areas, and many cities, by place of residence. The LAUS program is a federal-state cooperative endeavor in which states develop state and sub-state data using concepts, definitions, and technical procedures prescribed by the Bureau of Labor Statistics (BLS). A major source of labor force data estimates, the Current Population Survey (CPS) includes a sample of over 1,600 Connecticut households each month regarding the labor force status of their occupants Further information from the CT Department of Labor is available here: https://www1.ctdol.state.ct.us/lmi/LAUS/default.asp
- API
Stormwater Management Concept Information
data.montgomerycountymd.gov | Last Updated 2024-09-18T09:50:16.000ZA stormwater management concept is a statement or drawing, or both, describing the manner in which stormwater runoff from a proposed development will be controlled to minimize damage to neighboring properties and receiving streams and to also prevent the discharge of pollutants into surface waters. Update Frequency : Daily.
- API
DWR Livestock Water Tank and Erosion Control Dams
data.colorado.gov | Last Updated 2024-09-22T06:26:47.000ZLivestock water tanks are covered under the "Livestock Water Tank Act of Colorado" sections 35-49-101 to 35-49-116, C.R.S. These structures include all reservoirs built after April 17, 1941, on watercourses which the state engineer has determined to be "normally dry" and having a capacity of not more than ten acre-feet and a vertical height not exceeding fifteen feet from the bottom of the channel to the bottom of the spillway. Again, as with erosion control dams, the height is measured from the lowest point of the upstream toe to the crest of the spillway. No livestock water tanks can be used for irrigation purposes. Erosion control dams are governed under Colorado statute (see section 37-87-122, C.R.S. (1990). These types of structures may be constructed on water courses which have been determined by the state engineer to be normally dry (which for our purposes is dry more than 80% of the time). Structures of this type cannot exceed fifteen feet from the bottom of the channel to the bottom of the spillway and cannot exceed ten acre-feet at the emergency spillway level. The height of the dam is measured vertically from the lowest point of the upstream toe to the crest of the dam in contrast to those measured vertically from the centerline pursuant to section 37-87-105, C.R.S. (1990). Note: The structure can be larger than specified under section 37-87-122, however, it then will be evaluated and must be constructed pursuant to section 37-87-105.
- API
Local Area Unemployment Statistics
data.ct.gov | Last Updated 2024-09-22T11:31:47.000ZThe Local Area Unemployment Statistics (LAUS) program is a federal-state cooperative effort which produces monthly estimates of produces monthly and annual employment, unemployment, and labor force data for approximately 7,000 areas including Census regions and divisions, States, counties, metropolitan areas, and many cities. This dataset includes data for all 50 states, the District of Columbia, and Puerto Rico. To only see data for Connecticut, create a filter where "State name" is equal to "Connecticut". For more information on the LAUS program and data visit: https://www.bls.gov/lau/ For more information from the CT Department of Labor visit: https://www1.ctdol.state.ct.us/lmi/LAUS/default.asp
- API
Special Protection Area Review Data
data.montgomerycountymd.gov | Last Updated 2024-09-12T09:40:27.000ZA Special Protection Area (SPA) is a geographic area designated by the County Council which has high quality or unusually sensitive water resources and environmental features that would be threatened by proposed land development if special water quality protection measures were not applied. This dataset tracks reviews for development in all SPAs. Update Frequency : Daily.
- API
Iowa Watershed Boundaries: Subwatersheds (HUC 12)
mydata.iowa.gov | Last Updated 2023-12-05T18:03:00.000ZThe Watershed Boundary Dataset (WBD) defines the areal extent of surface water drainage to a point, accounting for all land and surface areas. Watershed Boundaries are determined solely upon science-based hydrologic principles, not favoring any administrative boundaries or special projects, nor particular program or agency. The intent of defining Hydrologic Units (HU) for the Watershed Boundary Dataset is to establish a base-line drainage boundary framework, accounting for all land and surface areas. At a minimum, the WBD is being delineated and georeferenced to the USGS 1:24,000 scale topographic base map meeting National Map Accuracy Standards (NMAS). Hydrologic units are given a Hydrologic Unit Code (HUC). For example, a hydrologic region has a 2-digit HUC. A HUC describes where the unit is in the country and the level of the unit. "A hydrologic unit is a drainage area delineated to nest in a multi-level, hierarchical drainage system. Its boundaries are defined by hydrographic and topographic criteria that delineate an area of land upstream from a specific point on a river, stream or similar surface waters. A hydrologic unit can accept surface water directly from upstream drainage areas, and indirectly from associated surface areas such as remnant, non-contributing, and diversions to form a drainage area with single or multiple outlet points. Hydrologic units are only synonymous with classic watersheds when their boundaries include all the source area contributing surface water to a single defined outlet point."