Empowered by Tyler Technologies
Refine Results

The population density of Bel Air, MD was 3,487 in 2013.

Population Density

Population Density is computed by dividing the total population by Land Area Per Square Mile.

Above charts are based on data from the U.S. Census American Community Survey | ODN Dataset | API - Notes:

1. ODN datasets and APIs are subject to change and may differ in format from the original source data in order to provide a user-friendly experience on this site.

2. To build your own apps using this data, see the ODN Dataset and API links.

3. If you use this derived data in an app, we ask that you provide a link somewhere in your applications to the Open Data Network with a citation that states: "Data for this application was provided by the Open Data Network" where "Open Data Network" links to http://opendatanetwork.com. Where an application has a region specific module, we ask that you add an additional line that states: "Data about REGIONX was provided by the Open Data Network." where REGIONX is an HREF with a name for a geographical region like "Seattle, WA" and the link points to this page URL, e.g. http://opendatanetwork.com/region/1600000US5363000/Seattle_WA

Geographic and Population Datasets Involving Bel Air, MD

  • API

    Choose Maryland: Compare Counties - Demographics

    opendata.maryland.gov | Last Updated 2024-07-09T17:43:22.000Z

    Population profile - total, rate of change, age, and density.

  • API

    Choose Maryland: Compare States - Demographics

    opendata.maryland.gov | Last Updated 2024-07-09T17:45:48.000Z

    Population profile - total, rate of change, age, and density.

  • API

    Maryland Resident Population Per Square Mile: 2010-2020

    opendata.maryland.gov | Last Updated 2024-03-11T18:51:03.000Z

    Resident population density for Maryland and Jurisdictions per square mile from 2010 to 2020. Source: U.S. Bureau of Census

  • API

    MD COVID-19 - Cases per 100K population, by jurisdiction

    opendata.maryland.gov | Last Updated 2024-09-24T14:41:23.000Z

    <b>Note:</b> Starting April 27, 2023 updates change from daily to weekly. <b>Summary</b> The rate of confirmed COVID-19 cases among Marylanders per 100,000 people in each Maryland jurisdiction. <b>Description</b> The MD COVID-19 cases per 100K population, by jurisdiction layer is the rate of confirmed daily COVID-19 cases among Marylanders per 100,000 people in each Maryland jurisdiction. This rate is a 7-day average, calculated using the CasesByCounty layer and the 2019 estimated county populations (Maryland Department of Planning). Any negative value may be attributed to changes in reporting by jurisdiction. <b>Terms of Use</b> The Spatial Data, and the information therein, (collectively the "Data") is provided "as is" without warranty of any kind, either expressed, implied, or statutory. The user assumes the entire risk as to quality and performance of the Data. No guarantee of accuracy is granted, nor is any responsibility for reliance thereon assumed. In no event shall the State of Maryland be liable for direct, indirect, incidental, consequential or special damages of any kind. The State of Maryland does not accept liability for any damages or misrepresentation caused by inaccuracies in the Data or as a result to changes to the Data, nor is there responsibility assumed to maintain the Data in any manner or form. The Data can be freely distributed as long as the metadata entry is not modified or deleted. Any data derived from the Data must acknowledge the State of Maryland in the metadata.

  • API

    MD COVID-19 - Cases per 100K population, statewide

    opendata.maryland.gov | Last Updated 2024-09-24T14:41:03.000Z

    <b>Note:</b> Starting April 27, 2023 updates change from daily to weekly. <b>Summary</b> The rate of confirmed COVID-19 cases among Marylanders per 100,000 people statewide. <b>Description</b> The MD COVID-19 cases per 100K population, statewide layer is the rate of confirmed daily COVID-19 cases among Marylanders per 100,000 people statewide. This rate is a 7-day average, calculated using the sum of the CasesByCounty layer and the 2019 estimated county populations (Maryland Department of Planning). <b>Terms of Use</b> The Spatial Data, and the information therein, (collectively the "Data") is provided "as is" without warranty of any kind, either expressed, implied, or statutory. The user assumes the entire risk as to quality and performance of the Data. No guarantee of accuracy is granted, nor is any responsibility for reliance thereon assumed. In no event shall the State of Maryland be liable for direct, indirect, incidental, consequential or special damages of any kind. The State of Maryland does not accept liability for any damages or misrepresentation caused by inaccuracies in the Data or as a result to changes to the Data, nor is there responsibility assumed to maintain the Data in any manner or form. The Data can be freely distributed as long as the metadata entry is not modified or deleted. Any data derived from the Data must acknowledge the State of Maryland in the metadata.

  • API

    Bronx 311 Air Quality 3.19.13 (population adjusted)

    bronx.lehman.cuny.edu | Last Updated 2019-04-18T20:37:00.000Z

    This is a 311 dataset combined with 2010 Census population data. The rate of air-quality complaints were divided by the population to get what is called a "population index" in get a better idea of the nature of the air-quality complaints. The more people there are in a given area, the more likely there will be more complaints. This is an attempt to correct for the population density in each census tract. The data is updated daily, so this is a snapshot of all of the complaints from 1/1/2010 to 3/19/2013.

  • API

    Trips by Distance

    data.bts.gov | Last Updated 2024-04-30T19:08:37.000Z

    How many people are staying at home? How far are people traveling when they don’t stay home? Which states and counties have more people taking trips? The Bureau of Transportation Statistics (BTS) now provides answers to those questions through our mobility statistics program. The "Trips by Distance" data and number of people staying home and not staying home are estimated for the Bureau of Transportation Statistics by the Maryland Transportation Institute and Center for Advanced Transportation Technology Laboratory at the University of Maryland. The travel statistics are produced from an anonymized national panel of mobile device data from multiple sources. All data sources used in the creation of the metrics contain no personal information. Data analysis is conducted at the aggregate national, state, and county levels. A weighting procedure expands the sample of millions of mobile devices, so the results are representative of the entire population in a nation, state, or county. To assure confidentiality and support data quality, no data are reported for a county if it has fewer than 50 devices in the sample on any given day. Trips are defined as movements that include a stay of longer than 10 minutes at an anonymized location away from home. Home locations are imputed on a weekly basis. A movement with multiple stays of longer than 10 minutes before returning home is counted as multiple trips. Trips capture travel by all modes of transportation. including driving, rail, transit, and air. The daily travel estimates are from a mobile device data panel from merged multiple data sources that address the geographic and temporal sample variation issues often observed in a single data source. The merged data panel only includes mobile devices whose anonymized location data meet a set of data quality standards, which further ensures the overall data quality and consistency. The data quality standards consider both temporal frequency and spatial accuracy of anonymized location point observations, temporal coverage and representativeness at the device level, spatial representativeness at the sample and county level, etc. A multi-level weighting method that employs both device and trip-level weights expands the sample to the underlying population at the county and state levels, before travel statistics are computed. These data are experimental and may not meet all of our quality standards. Experimental data products are created using new data sources or methodologies that benefit data users in the absence of other relevant products. We are seeking feedback from data users and stakeholders on the quality and usefulness of these new products. Experimental data products that meet our quality standards and demonstrate sufficient user demand may enter regular production if resources permit. These data are made available under a public domain license. Data should be attributed to the "Maryland Transportation Institute and Center for Advanced Transportation Technology Laboratory at the University of Maryland and the United States Bureau of Transportation Statistics." Daily data for a given week will be uploaded to the BTS website within 9-10 days of the end of the week in question (e.g., data for Sunday September 17-Saturday September 23 would be updated on Tuesday, October 3). All BTS visualizations and tables that rely on these data will update at approximately 10am ET on days when new data are received, processed, and uploaded. The methodology used to develop these data can be found at: https://rosap.ntl.bts.gov/view/dot/67520.

  • API

    MD COVID-19 - Vaccination Percent Age Group Population

    opendata.maryland.gov | Last Updated 2023-04-27T15:26:50.000Z

    Regarding all Vaccination Data The date of Last Update is 4/21/2023. Additionally on 4/27/2023 several COVID-19 datasets were retired and no longer included in public COVID-19 data dissemination. See this link for more information https://imap.maryland.gov/pages/covid-data <b>Summary</b> The cumulative number of COVID-19 vaccinations percent age group population: 16-17; 18-49; 50-64; 65 Plus. <b>Description</b> COVID-19 - Vaccination Percent Age Group Population data layer is a collection of COVID-19 vaccinations that have been reported each day into ImmuNet. COVID-19 is a disease caused by a respiratory virus first identified in Wuhan, Hubei Province, China in December 2019. COVID-19 is a new virus that hasn't caused illness in humans before. Worldwide, COVID-19 has resulted in thousands of infections, causing illness and in some cases death. Cases have spread to countries throughout the world, with more cases reported daily. The Maryland Department of Health reports daily on COVID-19 cases by county. <b>Terms of Use</b> The Spatial Data, and the information therein, (collectively the Data) is provided as is without warranty of any kind, either expressed, implied, or statutory. The user assumes the entire risk as to quality and performance of the Data. No guarantee of accuracy is granted, nor is any responsibility for reliance thereon assumed. In no event shall the State of Maryland be liable for direct, indirect, incidental, consequential or special damages of any kind. The State of Maryland does not accept liability for any damages or misrepresentation caused by inaccuracies in the Data or as a result to changes to the Data, nor is there responsibility assumed to maintain the Data in any manner or form. The Data can be freely distributed as long as the metadata entry is not modified or deleted. Any data derived from the Data must acknowledge the State of Maryland in the metadata. This map is for planning purposes only. MEMA does not guarantee the accuracy of any forecast or predictive elements.

  • API

    MD COVID-19 - Total Population Tested by County

    opendata.maryland.gov | Last Updated 2022-08-23T10:34:42.000Z

    <b>Summary</b> This layer is deprecated (Last updated 3/14/2022). The total number of residents who have been administered at least one COVID-19 test in each Maryland jurisdiction. <b>Description</b> Data represent the number of Maryland residents, both in number and by percent of the population, who have been tested for COVID-19 at least once each Maryland jurisdiction. <b>Terms of Use</b> The Spatial Data, and the information therein, (collectively the "Data") is provided "as is" without warranty of any kind, either expressed, implied, or statutory. The user assumes the entire risk as to quality and performance of the Data. No guarantee of accuracy is granted, nor is any responsibility for reliance thereon assumed. In no event shall the State of Maryland be liable for direct, indirect, incidental, consequential or special damages of any kind. The State of Maryland does not accept liability for any damages or misrepresentation caused by inaccuracies in the Data or as a result to changes to the Data, nor is there responsibility assumed to maintain the Data in any manner or form. The Data can be freely distributed as long as the metadata entry is not modified or deleted. Any data derived from the Data must acknowledge the State of Maryland in the metadata.

  • API

    Limited Master Electrician License

    data.montgomerycountymd.gov | Last Updated 2023-04-03T23:57:45.000Z

    This dataset contains a list of Limited Master Electrician's License information. A Master Electrician's License is required when an electrical contractor wishes to obtain a permit to perform electrical work in Montgomery County. Depending on the extent of work to be performed by the electrical contractor, one type of the license will be required. A Limited Master Electrician’s License is restricted to specific types of electrical work (e.g., heat/air conditioning, signs, or telephones) or specific locations (e.g., apartment buildings). for in the Montgomery County Zoning Ordinance (http://www.amlegal.com/). Update Frequency : Daily