Empowered by Tyler Technologies
Refine Results

The population density of Brunswick, MD was 1,855 in 2015. The population density of District Heights, MD was 6,513 in 2015.

Population Density

Population Density is computed by dividing the total population by Land Area Per Square Mile.

Above charts are based on data from the U.S. Census American Community Survey | ODN Dataset | API - Notes:

1. ODN datasets and APIs are subject to change and may differ in format from the original source data in order to provide a user-friendly experience on this site.

2. To build your own apps using this data, see the ODN Dataset and API links.

3. If you use this derived data in an app, we ask that you provide a link somewhere in your applications to the Open Data Network with a citation that states: "Data for this application was provided by the Open Data Network" where "Open Data Network" links to http://opendatanetwork.com. Where an application has a region specific module, we ask that you add an additional line that states: "Data about REGIONX was provided by the Open Data Network." where REGIONX is an HREF with a name for a geographical region like "Seattle, WA" and the link points to this page URL, e.g. http://opendatanetwork.com/region/1600000US5363000/Seattle_WA

Geographic and Population Datasets Involving Brunswick, MD or District Heights, MD

  • API

    MD COVID-19 - Cases per 100K population, by jurisdiction

    opendata.maryland.gov | Last Updated 2024-10-01T15:24:18.000Z

    <b>Note:</b> Starting April 27, 2023 updates change from daily to weekly. <b>Summary</b> The rate of confirmed COVID-19 cases among Marylanders per 100,000 people in each Maryland jurisdiction. <b>Description</b> The MD COVID-19 cases per 100K population, by jurisdiction layer is the rate of confirmed daily COVID-19 cases among Marylanders per 100,000 people in each Maryland jurisdiction. This rate is a 7-day average, calculated using the CasesByCounty layer and the 2019 estimated county populations (Maryland Department of Planning). Any negative value may be attributed to changes in reporting by jurisdiction. <b>Terms of Use</b> The Spatial Data, and the information therein, (collectively the "Data") is provided "as is" without warranty of any kind, either expressed, implied, or statutory. The user assumes the entire risk as to quality and performance of the Data. No guarantee of accuracy is granted, nor is any responsibility for reliance thereon assumed. In no event shall the State of Maryland be liable for direct, indirect, incidental, consequential or special damages of any kind. The State of Maryland does not accept liability for any damages or misrepresentation caused by inaccuracies in the Data or as a result to changes to the Data, nor is there responsibility assumed to maintain the Data in any manner or form. The Data can be freely distributed as long as the metadata entry is not modified or deleted. Any data derived from the Data must acknowledge the State of Maryland in the metadata.

  • API

    MD COVID-19 - Vaccination Percent Age Group Population

    opendata.maryland.gov | Last Updated 2023-04-27T15:26:50.000Z

    Regarding all Vaccination Data The date of Last Update is 4/21/2023. Additionally on 4/27/2023 several COVID-19 datasets were retired and no longer included in public COVID-19 data dissemination. See this link for more information https://imap.maryland.gov/pages/covid-data <b>Summary</b> The cumulative number of COVID-19 vaccinations percent age group population: 16-17; 18-49; 50-64; 65 Plus. <b>Description</b> COVID-19 - Vaccination Percent Age Group Population data layer is a collection of COVID-19 vaccinations that have been reported each day into ImmuNet. COVID-19 is a disease caused by a respiratory virus first identified in Wuhan, Hubei Province, China in December 2019. COVID-19 is a new virus that hasn't caused illness in humans before. Worldwide, COVID-19 has resulted in thousands of infections, causing illness and in some cases death. Cases have spread to countries throughout the world, with more cases reported daily. The Maryland Department of Health reports daily on COVID-19 cases by county. <b>Terms of Use</b> The Spatial Data, and the information therein, (collectively the Data) is provided as is without warranty of any kind, either expressed, implied, or statutory. The user assumes the entire risk as to quality and performance of the Data. No guarantee of accuracy is granted, nor is any responsibility for reliance thereon assumed. In no event shall the State of Maryland be liable for direct, indirect, incidental, consequential or special damages of any kind. The State of Maryland does not accept liability for any damages or misrepresentation caused by inaccuracies in the Data or as a result to changes to the Data, nor is there responsibility assumed to maintain the Data in any manner or form. The Data can be freely distributed as long as the metadata entry is not modified or deleted. Any data derived from the Data must acknowledge the State of Maryland in the metadata. This map is for planning purposes only. MEMA does not guarantee the accuracy of any forecast or predictive elements.

  • API

    MD COVID-19 - Total Vaccinations Statewide

    opendata.maryland.gov | Last Updated 2023-04-27T15:54:38.000Z

    Regarding all Vaccination Data The date of Last Update is 4/21/2023. Additionally on 4/27/2023 several COVID-19 datasets were retired and no longer included in public COVID-19 data dissemination. See this link for more information https://imap.maryland.gov/pages/covid-data <b>Summary</b> The cumulative number of COVID-19 vaccinations in Maryland: First dose, second dose, single dose, total vaccinations. <b>Description</b> The MD COVID-19 - Total Vaccinations Statewide data layer is a collection of the statewide COVID-19 vaccinations that have been reported each day into ImmuNet. Doses administered also account for doses of vaccine provided to the District of Columbia to vaccinate Maryland residents who work in DC. <b>Terms of Use</b> The Spatial Data, and the information therein, (collectively the "Data") is provided "as is" without warranty of any kind, either expressed, implied, or statutory. The user assumes the entire risk as to quality and performance of the Data. No guarantee of accuracy is granted, nor is any responsibility for reliance thereon assumed. In no event shall the State of Maryland be liable for direct, indirect, incidental, consequential or special damages of any kind. The State of Maryland does not accept liability for any damages or misrepresentation caused by inaccuracies in the Data or as a result to changes to the Data, nor is there responsibility assumed to maintain the Data in any manner or form. The Data can be freely distributed as long as the metadata entry is not modified or deleted. Any data derived from the Data must acknowledge the State of Maryland in the metadata.

  • API

    MD COVID-19 - Cases per 100K population, statewide

    opendata.maryland.gov | Last Updated 2024-10-01T15:23:56.000Z

    <b>Note:</b> Starting April 27, 2023 updates change from daily to weekly. <b>Summary</b> The rate of confirmed COVID-19 cases among Marylanders per 100,000 people statewide. <b>Description</b> The MD COVID-19 cases per 100K population, statewide layer is the rate of confirmed daily COVID-19 cases among Marylanders per 100,000 people statewide. This rate is a 7-day average, calculated using the sum of the CasesByCounty layer and the 2019 estimated county populations (Maryland Department of Planning). <b>Terms of Use</b> The Spatial Data, and the information therein, (collectively the "Data") is provided "as is" without warranty of any kind, either expressed, implied, or statutory. The user assumes the entire risk as to quality and performance of the Data. No guarantee of accuracy is granted, nor is any responsibility for reliance thereon assumed. In no event shall the State of Maryland be liable for direct, indirect, incidental, consequential or special damages of any kind. The State of Maryland does not accept liability for any damages or misrepresentation caused by inaccuracies in the Data or as a result to changes to the Data, nor is there responsibility assumed to maintain the Data in any manner or form. The Data can be freely distributed as long as the metadata entry is not modified or deleted. Any data derived from the Data must acknowledge the State of Maryland in the metadata.

  • API

    MD COVID-19 - Total Population Tested by County

    opendata.maryland.gov | Last Updated 2022-08-23T10:34:42.000Z

    <b>Summary</b> This layer is deprecated (Last updated 3/14/2022). The total number of residents who have been administered at least one COVID-19 test in each Maryland jurisdiction. <b>Description</b> Data represent the number of Maryland residents, both in number and by percent of the population, who have been tested for COVID-19 at least once each Maryland jurisdiction. <b>Terms of Use</b> The Spatial Data, and the information therein, (collectively the "Data") is provided "as is" without warranty of any kind, either expressed, implied, or statutory. The user assumes the entire risk as to quality and performance of the Data. No guarantee of accuracy is granted, nor is any responsibility for reliance thereon assumed. In no event shall the State of Maryland be liable for direct, indirect, incidental, consequential or special damages of any kind. The State of Maryland does not accept liability for any damages or misrepresentation caused by inaccuracies in the Data or as a result to changes to the Data, nor is there responsibility assumed to maintain the Data in any manner or form. The Data can be freely distributed as long as the metadata entry is not modified or deleted. Any data derived from the Data must acknowledge the State of Maryland in the metadata.

  • API

    MTA Transit Oriented Development (TOD) Data

    opendata.maryland.gov | Last Updated 2024-03-25T15:38:10.000Z

    *** DISCLAIMER - This web page is a public resource of general information. The Maryland Mass Transit Administration (MTA) makes no warranty, representation, or guarantee as to the content, sequence, accuracy, timeliness, or completeness of any of the spatial data or database information provided herein. MTA and partner state, local, and other agencies shall assume no liability for errors, omissions, or inaccuracies in the information provided regardless of how caused; or any decision made or action taken or not taken by any person relying on any information or data furnished within. *** This dataset assesses rail station potential for different forms of transit oriented development (TOD). A key driver of increased transit ridership in Maryland, TOD capitalizes on existing rapid transit infrastructure. The online tool focuses on the MTA’s existing MARC Commuter Rail, Metro Subway, and Central Light Rail lines and includes information specific to each station. The goal of this dataset is to give MTA planning staff, developers, local governments, and transit riders a picture of how each MTA rail station could attract TOD investment. In order to make this assessment, MTA staff gathered data on characteristics that are likely to influence TOD potential. The station-specific data is organized into 6 different categories referring to transit activity; station facilities; parking provision and utilization; bicycle and pedestrian access; and local zoning and land availability around each station. As a publicly shared resource, this dataset can be used by local communities to identify and prioritize area improvements in coordination with the MTA that can help attract investment around rail stations. You can view an interactive version of this dataset at geodata.md.gov/tod. ** Ridership is calculated the following ways: Metro Rail ridership is based on Metro gate exit counts. Light Rail ridership is estimated using a statistical sampling process in line with FTA established guidelines, and approved by the FTA. MARC ridership is calculated using two (2) independent methods: Monthly Line level ridership is estimated using a statistical sampling process in line with FTA established guidelines, and approved by the FTA. This method of ridership calculation is used by the MTA for official reporting purposes to State level and Federal level reporting. Station level ridership is estimated by using person counts completed by the third party vendor. This method of calculation has not been verified by the FTA for statistical reporting and is used for scheduling purposes only. However, because of the granularity of detail, this information is useful for TOD applications. *Please note that the monthly level ridership and the station level ridership are calculated using two (2) independent methods that are not interchangeable and should not be compared for analysis purposes.

  • API

    Master Electrician License

    data.montgomerycountymd.gov | Last Updated 2024-04-29T08:20:53.000Z

    This dataset contains a list of Master Electrician's License information. A Master Electrician's License is required when an electrical contractor wishes to obtain a permit to perform electrical work in Montgomery County. Update Frequency : Daily

  • API

    MC311 Service Requests

    data.montgomerycountymd.gov | Last Updated 2024-10-06T05:17:56.000Z

    Information on all MC311 Service Requests received (via email or phone) since July 1, 2012. This data is updated daily. The PIO’s business requirement includes adding the following data elements to the new and enhanced open data site being proposed by DTS. This data is derived from requests for service which originate in the CSC, from the County’s web portal, and via “walk-ins” from county departments including but not limited to DHCA. • SLA – to indicate the number of days in county business days the department has to fulfill the request. County business days must exclude weekends, county holidays and days when the county is closed due to inclement weather (snow days, etc) per CountyStat’s business requirement. This field has been published in the existing MC311 Service Requests dataset with the field name ‘Attached Solution SLA Days’. • +/- SLA –to indicate the number of days a service request is over or under SLA as is currently measured by CountyStat. The following 4 fields will be added to fulfill this line item  # of days open – Number of County Business days the Service Request has been opened.  Within SLA Window? - To indicate the number of days a service request is over or under SLA as is currently measured by CountyStat.  SLA Yes – Number of days to fulfill the service request is under the SLA window.  SLA No -– Number of days to fulfill the service request is over the SLA window.

  • API

    District Court of Maryland Eviction Case Data

    opendata.maryland.gov | Last Updated 2024-10-01T11:56:21.000Z

    A statewide listing of District Court of Maryland Eviction Case Data & its Process. Maryland enacted a new law in 2022 requiring the District Court of Maryland to collect and report eviction case data. Additionally, the Maryland Department of Housing and Community Development is required to host a dashboard for the public to view and analyze the information, as well as produce an annual report on evictions. The District Court began collecting the eviction case data required under the law on January 1, 2023, and the public dashboard was launched in May 2023.

  • API

    Crash Reporting - Incidents Data

    data.montgomerycountymd.gov | Last Updated 2024-10-04T05:41:33.000Z

    This dataset provides general information about each collision and details of all traffic collisions occurring on county and local roadways within Montgomery County, as collected via the Automated Crash Reporting System (ACRS) of the Maryland State Police, and reported by the Montgomery County Police, Gaithersburg Police, Rockville Police, or the Maryland-National Capital Park Police. Please note that these collision reports are based on preliminary information supplied to the Police Department by the reporting parties. Therefore, the collision data available on this web page may reflect: -Information not yet verified by further investigation -Information that may include verified and unverified collision data -Preliminary collision classifications may be changed at a later date based upon further investigation -Information may include mechanical or human error This dataset can be joined with the other 2 Crash Reporting datasets (see URLs below) by the State Report Number. * Crash Reporting - Drivers Data at https://data.montgomerycountymd.gov/Public-Safety/Crash-Reporting-Drivers-Data/mmzv-x632 * Crash Reporting - Non-Motorists Data at https://data.montgomerycountymd.gov/Public-Safety/Crash-Reporting-Non-Motorists-Data/n7fk-dce5 Update Frequency : Weekly