The water area of Dennis Port, MA was 0 in 2012.
Land Area
Water Area
Land area is a measurement providing the size, in square miles, of the land portions of geographic entities for which the Census Bureau tabulates and disseminates data. Area is calculated from the specific boundary recorded for each entity in the Census Bureau's geographic database. Land area is based on current information in the TIGER® data base, calculated for use with Census 2010.
Water Area figures include inland, coastal, Great Lakes, and territorial sea water. Inland water consists of any lake, reservoir, pond, or similar body of water that is recorded in the Census Bureau's geographic database. It also includes any river, creek, canal, stream, or similar feature that is recorded in that database as a two- dimensional feature (rather than as a single line). The portions of the oceans and related large embayments (such as Chesapeake Bay and Puget Sound), the Gulf of Mexico, and the Caribbean Sea that belong to the United States and its territories are classified as coastal and territorial waters; the Great Lakes are treated as a separate water entity. Rivers and bays that empty into these bodies of water are treated as inland water from the point beyond which they are narrower than 1 nautical mile across. Identification of land and inland, coastal, territorial, and Great Lakes waters is for data presentation purposes only and does not necessarily reflect their legal definitions.
Above charts are based on data from the U.S. Census American Community Survey | ODN Dataset | API -
Geographic and Area Datasets Involving Dennis Port, MA
- API
Infectious Illness Dashboard
data.somervillema.gov | Last Updated 2024-08-06T17:42:02.000ZThis is a dataset for the City of Somerville Infectious Illness Dashboard. This dataset combines multiple public data sources concerning COVID and flu in Massachusetts and, where possible, in the Somerville area specifically. Data sources include the Center for Disease Control, the Massachusetts Department of Public Health, and the Massachusetts Water Resources Authority.
- API
Annual Town Gown Report Higher Education Statistics 2000 - 2023
data.cambridgema.gov | Last Updated 2024-01-19T15:45:22.000ZThe Town Gown reporting process derives from the 1991 Mayor's Committee on University-Community Relationships. This review takes two forms. Every year each school first submits a Town Gown Annual Report; this is then followed by a presentation to the Cambridge Planning Board. The data included here is taken from the annual reports and included in the presentations to the Planning Board
- API
Deep and/or Fast Flowing Floodway
internal.open.piercecountywa.gov | Last Updated 2024-07-05T17:00:54.000ZNorthwest Hydraulic Consultants, Inc (NHC) was contracted by Pierce County Surface Water Management to develop a map of the Deep and Fast Flowing (DFF) regulated Floodway in Pierce County because this area is not mapped by FEMA and it is not intuitive where this floodway is located within the floodplain. NHC wrote the metadata. Deep and/or fast-flowing (DFF) floodway boundary for Puyallup, Carbon, Mashell, and White Rivers, South Prairie Creek, Fennel Creek, Wapato Creek, Canyon Creek, Clarks Creek, Clear Creek, Diru Creek, Rody Creek, Clover Creek, Spanaway Creek, Morey Creek, Crescent Creek, Artondale Creek, Lacamas Creek, and Swan Creek. DFF floodway determined only for detailed study areas from new (2001-2007) model studies. For additional information on this theme Please contact Dennis Dixon at 253-798-3696 for the DFF Report.pdf. Please read metadata for additional information (https://matterhorn.co.pierce.wa.us/GISmetadata/pdbswm_regulated_dff_floodway.html). Any data download constitutes acceptance of the Terms of Use (https://matterhorn.co.pierce.wa.us/Disclaimer/PierceCountyGISDataTermsofUse.pdf).
- API
Excavation Permits
data.cambridgema.gov | Last Updated 2024-10-16T19:18:40.000ZExcavation permits since April 2019
- API
Wetlands
data.cambridgema.gov | Last Updated 2024-10-01T18:34:54.000ZView full metadata: https://www.cambridgema.gov/GIS/gisdatadictionary/Hydro/HYDRO_Wetlands Description City of Cambridge, MA GIS basemap development project encompasses the land area of City of Cambridge with a 200 foot fringe surrounding the area and Charles River shoreline towards Boston. The basemap data was developed at 1" = 40' mapping scale using digital photogrammetric techniques. Planimetric features; both man-made and natural features like vegetation, rivers have been depicted. These features are important to all GIS/mapping applications and publication. A set of data layers such as Buildings, Roads, Rivers, Utility structures, 1 ft interval contours are developed and represented in the geodatabase. The features are labeled and coded in order to represent specific feature class for thematic representation and topology between the features is maintained for an accurate representation at the 1:40 mapping scale for both publication and analysis. The basemap data has been developed using procedures designed to produce data to the National Standard for Spatial Data Accuracy (NSSDA) and is intended for use at 1" = 40 ' mapping scale. Purpose City of Cambridge 1" - 40' base map layers from an April 14, 2010 flyover. Basemap layers created by Infotech America. About Edit Dates This data is automatically updated on a set schedule. The Socrata edit date may not reflect the actual edit dates in the data. For more details please see the update date on the full metadata page or view the edit date within the data rows.
- API
Deep and/or Fast Flowing Floodway
open.piercecountywa.gov | Last Updated 2024-07-05T16:29:59.000ZNorthwest Hydraulic Consultants, Inc (NHC) was contracted by Pierce County Surface Water Management to develop a map of the Deep and Fast Flowing (DFF) regulated Floodway in Pierce County because this area is not mapped by FEMA and it is not intuitive where this floodway is located within the floodplain. NHC wrote the metadata. Deep and/or fast-flowing (DFF) floodway boundary for Puyallup, Carbon, Mashell, and White Rivers, South Prairie Creek, Fennel Creek, Wapato Creek, Canyon Creek, Clarks Creek, Clear Creek, Diru Creek, Rody Creek, Clover Creek, Spanaway Creek, Morey Creek, Crescent Creek, Artondale Creek, Lacamas Creek, and Swan Creek. DFF floodway determined only for detailed study areas from new (2001-2007) model studies. For additional information on this theme Please contact Dennis Dixon at 253-798-3696 for the DFF Report.pdf. Please read metadata for additional information (https://matterhorn.co.pierce.wa.us/GISmetadata/pdbswm_regulated_dff_floodway.html). Any data download constitutes acceptance of the Terms of Use (https://matterhorn.co.pierce.wa.us/Disclaimer/PierceCountyGISDataTermsofUse.pdf).
- API
Municipal Wastewater COVID19 Sampling Data 10/1/2020-6/30/2022
data.cambridgema.gov | Last Updated 2024-04-18T20:25:13.000ZThis dataset is no longer being updated as of 6/30/2022. It is being retained on the Open Data Portal for its potential historical interest. In November 2020, the City of Cambridge began collecting and analyzing COVID-19 data from municipal wastewater, which can serve as an early indicator of increased COVID-19 infections in the city. The Cambridge Public Health Department and Cambridge Department of Public Works are using technology developed by Biobot, a Cambridge based company, and partnering with the Massachusetts Water Resources Authority (MWRA). This Cambridge wastewater surveillance initiative is funded through a $175,000 appropriation from the Cambridge City Council. This dataset indicates the presence of the COVID-19 virus (measured as viral RNA particles from the novel coronavirus per ml) in municipal wastewater. The Cambridge site data here were collected as a 24-hour composite sample, which is taken weekly. The MWRA site data ere were collected as a 24-hour composite sample, which is taken daily. MWRA and Cambridge data are listed here in a single table. An interactive graph of this data is available here: https://cityofcambridge.shinyapps.io/COVID19/?tab=wastewater All areas within the City of Cambridge are captured across four separate catchment areas (or sewersheds) as indicated on the map viewable here: https://cityofcambridge.shinyapps.io/COVID19/_w_484790f7/BioBot_Sites.png. The North and West Cambridge sample also includes nearly all of Belmont and very small areas of Arlington and Somerville (light yellow). The remaining collection sites are entirely -- or almost entirely -- drawn from Cambridge households and workplaces. Data are corrected for wastewater flow rate, which adjusts for population in general. Data listed are expected to reflect the burden of COVID-19 infections within each of the four sewersheds. A lag of approximately 4-7 days will occur before new transmissions captured in wastewater data would result in a positive PCR test for COVID-19, the most common testing method used. While this wastewater surveillance tool can provide an early indication of major changes in transmission within the community, it remains an emerging technology. In assessing community transmission, wastewater surveillance data should only be considered in conjunction with other clinical measures, such as current infection rates and test positivity. Each location is selected because it reflects input from a distinct catchment area (or sewershed) as identified on the color-coded map. Viral data collected from small catchment areas like these four Cambridge sites are more variable than data collected from central collection points (e.g., the MWRA facility on Deer Island) where wastewater from dozens of communities are joined and mixed. Data from each catchment area will be impacted by daily activity among individuals living in that area (e.g., working from home vs. traveling to work) and by daytime activities that are not from residences (businesses, schools, etc.) As such, the Regional MWRA data provides a more stable measure of regional viral counts. COVID wastewater data for Boston North and Boston South regions is available at https://www.mwra.com/biobot/biobotdata.htm
- API
Crustaceans and Demersal, Large Pelagic and Small Pelagic Fish (Operational Data)
datahub.usaid.gov | Last Updated 2024-07-12T10:14:09.000ZOperational data provides operational information of sampled fishing vessels that contains specifications of vessel, engine and fishing gears, and operational inputs. The variables of these data are: organization/project; ID trip; surveyor; landing site/collector; fishing ground (fisheries management area/WPP); sampling time; time; commodity; vessel name/owner; mark; vessel owner; captain name; departure; arrival; origin port; crew (individual); vessel length; vessel weight; main engine; second engine; vessel material; light power; vessel space (unit); box total (unit); space/box capacity; auxiliary vessel; auxiliary vessel; size; freezer; freezer capacity; GPS use ; GPS type; andon (mobile fishing from other provinces) vessel; andon vessel provenance; fishing gear; fishing gear specifications; value; unit; material; tools operated (unit); fishing areas; setting total; ice block total; water depth (start); water depth (real); number of days per trip; number of days per catch; FAD use; FAD visited; FAD succeeded; fishing time; soaking (hour); comment; resources; total catch for consume in volume (Kg); total catch for consume in units (Ind); total catch in volume (Kg); total catch in units (Ind); local name; common name; species name; FAO; haul (Kg); units (Ind); storage method (fresh); storage method (frozen); storage method (salted); storage method (loin); storage method (boiled). The operational data can be used to estimate catch per unit effort (CPUE) of the fisheries and socioeconomics of the fisheries including associated cost.
- API
California Protected Area Database (HESS)
data.bayareametro.gov | Last Updated 2023-06-09T00:41:33.000ZCalifornia Protected Area Database (CPAD) for development of the Parcel Inventory dataset for the Housing Element Site Selection (HESS) Pre-Screening Tool. This feature set contains a subset of the statewide source. Its geographic extent covers the San Francisco Bay Region. CPAD inventories open space lands that have been protected for open space uses through fee ownerships. CPAD is not a database of all public lands – for example, it does not include public buildings, water treatment sites, or other non-open space public land. CPAD is suitable for a wide range of planning, assessment, analysis, and display purposes. CPAD should not be used as the basis for official regulatory, legal, or other such governmental actions without more detailed review of current official land records in the area of focus. This feature set contains the CPAD Super Unit features of the database. Super Units are aggregations of Units (which themselves are aggregations of Holdings) to create use-focused polygons for each site name (e.g. Las Trampas Regional Wilderness). Super Units are useful for recreation applications and for cartographic representation. Note: ● Super Units aggregate units based on the managing agency. ● Super Units maintain distinct units for different types of public access. ● Super Units cross county boundaries. ● Super Units have fewer attributes and are primarily used for cartography/display purposes, and to support recreational access applications. The lands in CPAD are defined by their owning and managing agencies at the Holdings and Units levels. At the Super Units level (a version of the release meant primarily for recreation applications, and for general cartography), CPAD lands are defined simply by name, managing agency, and public access. Access to CPAD GIS data is primarily through the State of California’s Atlas open data portal – a download link and more information about CPAD, including a PDF manual about the data, is at https://www.calands.org/cpad/. CPAD is released in shapefile format. The state site also hosts map services with CPAD data displayed by Access Type, Agency Classification, and Agency Level.
- API
USAID Construction Assessment, Subawards: Section 1
datahub.usaid.gov | Last Updated 2024-06-25T02:27:50.000ZThis dataset contains data on subwards identified in the survey of USAID construction carried out between June 1, 2011 to June 20 to learn about the character, scope, value and management of USAID supported construction activities. In the process of migrating data to the current DDL platform, datasets with a large number of variables required splitting into multiple spreadsheets. They should be reassembled by the user to understand the data fully. The USAID construction assessment is a survey of the character, scope, value and management of construction activities supported by USAID during the period from June 1, 2011 to June 20, 2013.