The population density of Prior Lake, MN was 1,486 in 2012.
Population Density
Population Density is computed by dividing the total population by Land Area Per Square Mile.
Above charts are based on data from the U.S. Census American Community Survey | ODN Dataset | API -
Geographic and Population Datasets Involving Prior Lake, MN
- API
WAOFM - Census - Population and Housing, 2000 and 2010
data.wa.gov | Last Updated 2021-09-01T17:20:31.000ZPopulation and housing information extracted from decennial census Public Law 94-171 redistricting summary files for Washington state for years 2000 and 2010.
- API
WAOFM - Census - Population Density by County by Decade, 1900 to 2020
data.wa.gov | Last Updated 2023-07-06T16:48:57.000ZWashington state population density by county by decade 1900 to 2020.
- API
City and Township Population Data
data.ramseycounty.us | Last Updated 2022-03-21T15:37:41.000ZSources: MN State Demographic Center and the Metropolitan Council. Released August 2020. The Minnesota State Demographic Center (our office) and the Metropolitan Council jointly produce population and household estimates for all years between the U.S. Census Bureau's decennial (10-year) counts. The Met Council produces the estimates for the seven counties of Anoka, Carver, Dakota, Hennepin, Ramsey, Scott, and Washington, as well as all cities and townships within those counties. Our office produces the estimates for the other 80 Minnesota counties outside of the 7-county metro, as well as all cities and townships within those counties. Notes: New estimates are released annually in late July for the prior year. All data are dated to April 1. Persons per household is calculated by dividing the household population by the number of occupied households in any given geography. The household population does not equal the total population because some residents live in "group quarters" settings (such as college dormitories, nursing facilities, shelters, treatment centers, religious orders, military barracks, or correctional facilities), and thus are not living in households. Cities that cross county boundaries are segmented by each county's portion (labeled "part"), as well as appearing in total under "Multi-County City" in the "COUNTY NAME" column.
- API
WAOFM - April 1 - Population Density by County, 2000 to Present
data.wa.gov | Last Updated 2024-07-11T21:24:42.000ZIntercensal and postcensal estimates of population density by county 2000 to present.
- API
2019 Volunteers Count Report - Neighborhoods
data.cityofnewyork.us | Last Updated 2024-01-25T21:38:46.000ZThe annual NYC Volunteers Count report is the City’s largest scan of residents volunteering at organizations across New York City. Organizations, including City agencies, Mayoral offices, and nonprofits, are surveyed to understand how residents volunteer within the city’s infrastructure to strengthen communities at the neighborhood level. All participating organizations are recognized for their contributions in the annual NYC Volunteers Count report.
- API
Daily Vehicle Miles of Travel: Beginning 1985
data.ny.gov | Last Updated 2022-02-15T22:29:27.000ZVMT is an estimate of travel based on traffic counts taken along the roads in New York State. Each year travel is estimated as part of the annual report to the Federal Highway Administration through the Highway Performance Monitoring System software application. The VMT estimate is stratified by the roadway Functional Classification of Principal Arterials, Minor Arterials, Collectors, and Local Roads & Street. The VMT data from 1985 through the current year is available.
- API
CDC COVID-19 Community Levels by County
data.ramseycounty.us | Last Updated 2024-10-21T07:04:37.000ZThis public use dataset has 11 data elements reflecting United States COVID-19 community levels for all available counties. This dataset contains the same values used to display information available on the COVID Data Tracker at: https://covid.cdc.gov/covid-data-tracker/#county-view?list_select_state=all_states&list_select_county=all_counties&data-type=CommunityLevels The data are updated weekly. CDC looks at the combination of three metrics — new COVID-19 admissions per 100,000 population in the past 7 days, the percent of staffed inpatient beds occupied by COVID-19 patients, and total new COVID-19 cases per 100,000 population in the past 7 days — to determine the COVID-19 community level. The COVID-19 community level is determined by the higher of the new admissions and inpatient beds metrics, based on the current level of new cases per 100,000 population in the past 7 days. New COVID-19 admissions and the percent of staffed inpatient beds occupied represent the current potential for strain on the health system. Data on new cases acts as an early warning indicator of potential increases in health system strain in the event of a COVID-19 surge. Using these data, the COVID-19 community level is classified as low, medium, or high. COVID-19 Community Levels can help communities and individuals make decisions based on their local context and their unique needs. Community vaccination coverage and other local information, like early alerts from surveillance, such as through wastewater or the number of emergency department visits for COVID-19, when available, can also inform decision making for health officials and individuals. See https://www.cdc.gov/coronavirus/2019-ncov/science/community-levels.html for more information. For the most accurate and up-to-date data for any county or state, visit the relevant health department website. COVID Data Tracker may display data that differ from state and local websites. This can be due to differences in how data were collected, how metrics were calculated, or the timing of web updates. For more details on the Minnesota Department of Health COVID-19 thresholds, see COVID-19 Public Health Risk Measures: Data Notes (Updated 4/13/22). https://mn.gov/covid19/assets/phri_tcm1148-434773.pdf Note: This dataset was renamed from "United States COVID-19 Community Levels by County as Originally Posted" to "United States COVID-19 Community Levels by County" on March 31, 2022. March 31, 2022: Column name for county population was changed to “county_population”. No change was made to the data points previous released. March 31, 2022: New column, “health_service_area_population”, was added to the dataset to denote the total population in the designated Health Service Area based on 2019 Census estimate. March 31, 2022: FIPS codes for territories American Samoa, Guam, Commonwealth of the Northern Mariana Islands, and United States Virgin Islands were re-formatted to 5-digit numeric for records released on 3/3/2022 to be consistent with other records in the dataset. March 31, 2022: Changes were made to the text fields in variables “county”, “state”, and “health_service_area” so the formats are consistent across releases. March 31, 2022: The “%” sign was removed from the text field in column “covid_inpatient_bed_utilization”. No change was made to the data. As indicated in the column description, values in this column represent the percentage of staffed inpatient beds occupied by COVID-19 patients (7-day average). March 31, 2022: Data values for columns, “county_population”, “health_service_area_number”, and “health_service_area” were backfilled for records released on 2/24/2022. These columns were added since the week of 3/3/2022, thus the values were previously missing for records released the week prior. April 7, 2022: Updates made to data released on 3/24/2022 for Guam, Commonwealth of the Northern Mariana Islands, and United States Virgin Islands to correct a data mapping error.
- API
Centers for Disease Control and Prevention, Division of Healthcare Quality Promotion, National Healthcare Safety Network, Weekly United States COVID-19 Hospitalization Metrics - Ramsey County
data.ramseycounty.us | Last Updated 2024-10-21T12:11:50.000ZNote: This dataset has been limited to show metrics for Ramsey County, Minnesota. This dataset represents COVID-19 hospitalization data and metrics aggregated to county or county-equivalent, for all counties or county-equivalents (including territories) in the United States. COVID-19 hospitalization data are reported to CDC’s National Healthcare Safety Network, which monitors national and local trends in healthcare system stress, capacity, and community disease levels for approximately 6,000 hospitals in the United States. Data reported by hospitals to NHSN and included in this dataset represent aggregated counts and include metrics capturing information specific to COVID-19 hospital admissions, and inpatient and ICU bed capacity occupancy. Reporting information: As of December 15, 2022, COVID-19 hospital data are required to be reported to NHSN, which monitors national and local trends in healthcare system stress, capacity, and community disease levels for approximately 6,000 hospitals in the United States. Data reported by hospitals to NHSN represent aggregated counts and include metrics capturing information specific to hospital capacity, occupancy, hospitalizations, and admissions. Prior to December 15, 2022, hospitals reported data directly to the U.S. Department of Health and Human Services (HHS) or via a state submission for collection in the HHS Unified Hospital Data Surveillance System (UHDSS). While CDC reviews these data for errors and corrects those found, some reporting errors might still exist within the data. To minimize errors and inconsistencies in data reported, CDC removes outliers before calculating the metrics. CDC and partners work with reporters to correct these errors and update the data in subsequent weeks. Many hospital subtypes, including acute care and critical access hospitals, as well as Veterans Administration, Defense Health Agency, and Indian Health Service hospitals, are included in the metric calculations provided in this report. Psychiatric, rehabilitation, and religious non-medical hospital types are excluded from calculations. Data are aggregated and displayed for hospitals with the same Centers for Medicare and Medicaid Services (CMS) Certification Number (CCN), which are assigned by CMS to counties based on the CMS Provider of Services files. Full details on COVID-19 hospital data reporting guidance can be found here: https://www.hhs.gov/sites/default/files/covid-19-faqs-hospitals-hospital-laboratory-acute-care-facility-data-reporting.pdf Calculation of county-level hospital metrics: County-level hospital data are derived using calculations performed at the Health Service Area (HSA) level. An HSA is defined by CDC’s National Center for Health Statistics as a geographic area containing at least one county which is self-contained with respect to the population’s provision of routine hospital care. Every county in the United States is assigned to an HSA, and each HSA must contain at least one hospital. Therefore, use of HSAs in the calculation of local hospital metrics allows for more accurate characterization of the relationship between health care utilization and health status at the local level. Data presented at the county-level represent admissions, hospital inpatient and ICU bed capacity and occupancy among hospitals within the selected HSA. Therefore, admissions, capacity, and occupancy are not limited to residents of the selected HSA. For all county-level hospital metrics listed below the values are calculated first for the entire HSA, and then the HSA-level value is then applied to each county within the HSA. For all county-level hospital metrics listed below the values are calculated first for the entire HSA, and then the HSA-level value is then applied to each county within the HSA. Metric details: Time period: data for the previous MMWR week (Sunday-Saturday) will update weekly on Thursdays as soon as they are reviewed and verified, usually before 8 pm ET. Updates will occur
- API
Genes Controlling Black Seed Coat and Pod Tip Color in Cowpea: Phenotype Data for the Sanzi by Vita 7 population
datahub.usaid.gov | Last Updated 2024-06-25T02:56:51.000ZSeed coat color is an important part of consumer preferences for cowpea (Vigna unguiculata [L.] Walp). Color has been studied in numerous crop species and has often been linked to loci controlling the anthocyanin biosynthesis pathway. This study makes use of available resources, including mapping populations, a reference genome, and a high-density single nucleotide polymorphism genotyping platform, to map the black seed coat and purple pod tip color traits, with the gene symbol Bl, in cowpea. Several gene models encoding MYB domain protein 113 were identified as candidate genes. MYB domain proteins have been shown in other species to control expression of genes encoding enzymes for the final steps in the anthocyanin biosynthesis pathway. PCR analysis indicated that a presence/absence variation of one or more MYB113 genes may control the presence or absence of black pigment. A PCR marker has been developed for the MYB113 gene Vigun05g039500, a candidate gene for black seed coat color in cowpea.
- API
Genes Controlling Black Seed Coat and Pod Tip Color in Cowpea: Phenotype data for the MAGIC population
datahub.usaid.gov | Last Updated 2024-06-25T02:53:20.000ZSeed coat color is an important part of consumer preferences for cowpea (Vigna unguiculata [L.] Walp). Color has been studied in numerous crop species and has often been linked to loci controlling the anthocyanin biosynthesis pathway. This study makes use of available resources, including mapping populations, a reference genome, and a high-density single nucleotide polymorphism genotyping platform, to map the black seed coat and purple pod tip color traits, with the gene symbol Bl, in cowpea. Several gene models encoding MYB domain protein 113 were identified as candidate genes. MYB domain proteins have been shown in other species to control expression of genes encoding enzymes for the final steps in the anthocyanin biosynthesis pathway. PCR analysis indicated that a presence/absence variation of one or more MYB113 genes may control the presence or absence of black pigment. A PCR marker has been developed for the MYB113 gene Vigun05g039500, a candidate gene for black seed coat color in cowpea.