The land area of Stony Point, NC was 3 in 2013.
Land Area
Water Area
Land area is a measurement providing the size, in square miles, of the land portions of geographic entities for which the Census Bureau tabulates and disseminates data. Area is calculated from the specific boundary recorded for each entity in the Census Bureau's geographic database. Land area is based on current information in the TIGER® data base, calculated for use with Census 2010.
Water Area figures include inland, coastal, Great Lakes, and territorial sea water. Inland water consists of any lake, reservoir, pond, or similar body of water that is recorded in the Census Bureau's geographic database. It also includes any river, creek, canal, stream, or similar feature that is recorded in that database as a two- dimensional feature (rather than as a single line). The portions of the oceans and related large embayments (such as Chesapeake Bay and Puget Sound), the Gulf of Mexico, and the Caribbean Sea that belong to the United States and its territories are classified as coastal and territorial waters; the Great Lakes are treated as a separate water entity. Rivers and bays that empty into these bodies of water are treated as inland water from the point beyond which they are narrower than 1 nautical mile across. Identification of land and inland, coastal, territorial, and Great Lakes waters is for data presentation purposes only and does not necessarily reflect their legal definitions.
Above charts are based on data from the U.S. Census American Community Survey | ODN Dataset | API -
Geographic and Area Datasets Involving Stony Point, NC
- API
Elevation Benchmarks
data.cityofchicago.org | Last Updated 2013-02-28T15:29:13.000ZThe following dataset includes "Active Benchmarks," which are provided to facilitate the identification of City-managed standard benchmarks. Standard benchmarks are for public and private use in establishing a point in space. Note: The benchmarks are referenced to the Chicago City Datum = 0.00, (CCD = 579.88 feet above mean tide New York). The City of Chicago Department of Water Management’s (DWM) Topographic Benchmark is the source of the benchmark information contained in this online database. The information contained in the index card system was compiled by scanning the original cards, then transcribing some of this information to prepare a table and map. Over time, the DWM will contract services to field verify the data and update the index card system and this online database.This dataset was last updated September 2011. Coordinates are estimated. To view map, go to https://data.cityofchicago.org/Buildings/Elevation-Benchmarks-Map/kmt9-pg57 or for PDF map, go to http://cityofchicago.org/content/dam/city/depts/water/supp_info/Benchmarks/BMMap.pdf. Please read the Terms of Use: http://www.cityofchicago.org/city/en/narr/foia/data_disclaimer.html.
- API
DWR Dam Safety Jurisdictional Dam
data.colorado.gov | Last Updated 2024-10-24T06:04:40.000ZA Jurisdictional Dam is a dam creating a reservoir with a capacity of more than 100 acre-feet, or creates a reservoir with a surface area in excess of 20 acres at the high-water line, or exceeds 10 feet in height measured vertically from the elevation of the lowest point of the natural surface of the ground where that point occurs along the longitudinal centerline of the dam up to the crest of the emergency spillway of the dam. For reservoirs created by excavation, or where the invert of the outlet conduit is placed below the surface of the natural ground at its lowest point beneath the dam, the jurisdictional height shall be measured from the invert of the outlet at the longitudinal centerline of the embankment or from the bottom of the excavation at the longitudinal centerline of the dam, whichever is greatest. Jurisdictional height is defined in Rule 4.2.19. The State Engineer shall have final authority over determination of the jurisdictional height of the dam.
- API
Water Point Data Exchange - Plus (WPdx+)
data.waterpointdata.org | Last Updated 2024-10-24T06:20:48.000ZWPdx+ is an enhanced version of the WPdx-Basic dataset. For a full comparison between the two datasets, please visit our blog at https://www.waterpointdata.org/2021/10/07/introducing-wpdx-plus/. The Water Point Data Exchange (WPdx) is the global platform for sharing water point data. The WPdx Data Standard was designed by a wide range of stakeholders from across sectors and around the world. The core attributes included in the standard are already being collected by governments, researchers, and organizations around the world. To read more about the standard or to contribute water point data visit www.waterpointdata.org.
- API
DWR Dam Safety Non-Jurisdictional Dam
data.colorado.gov | Last Updated 2024-10-24T06:02:39.000ZA Non-Jurisdictional Dam is a dam creating a reservoir with a capacity of 100 acre-feet or less and a surface area of 20 acres or less and with a height measured as defined in Rules 4.2.5.1 and 4.2.19 of 10 feet or less. Non-jurisdictional size dams are regulated and subject to the authority of the State Engineer consistent with sections 37- 87-102 and 37-87-105 C.R.S.
- API
DWR Livestock Water Tank and Erosion Control Dams
data.colorado.gov | Last Updated 2024-10-20T06:25:26.000ZLivestock water tanks are covered under the "Livestock Water Tank Act of Colorado" sections 35-49-101 to 35-49-116, C.R.S. These structures include all reservoirs built after April 17, 1941, on watercourses which the state engineer has determined to be "normally dry" and having a capacity of not more than ten acre-feet and a vertical height not exceeding fifteen feet from the bottom of the channel to the bottom of the spillway. Again, as with erosion control dams, the height is measured from the lowest point of the upstream toe to the crest of the spillway. No livestock water tanks can be used for irrigation purposes. Erosion control dams are governed under Colorado statute (see section 37-87-122, C.R.S. (1990). These types of structures may be constructed on water courses which have been determined by the state engineer to be normally dry (which for our purposes is dry more than 80% of the time). Structures of this type cannot exceed fifteen feet from the bottom of the channel to the bottom of the spillway and cannot exceed ten acre-feet at the emergency spillway level. The height of the dam is measured vertically from the lowest point of the upstream toe to the crest of the dam in contrast to those measured vertically from the centerline pursuant to section 37-87-105, C.R.S. (1990). Note: The structure can be larger than specified under section 37-87-122, however, it then will be evaluated and must be constructed pursuant to section 37-87-105.
- API
Licensed water well drillers by company name Utah
opendata.utah.gov | Last Updated 2019-04-19T02:21:26.000ZLicensed water well drillers by company name Utah
- API
Waste Tire Abatement Sites
data.ny.gov | Last Updated 2024-09-27T18:10:25.000ZInformation on designated waste tire abatement sites in New York State, including approximate size, location, and abatement status.
- API
Licensed water pump Installers by name Utah
opendata.utah.gov | Last Updated 2019-04-19T06:53:26.000ZLicensed water pump Installers by name Utah
- API
Licensed water well drillers by name Utah
opendata.utah.gov | Last Updated 2019-04-19T08:25:50.000ZLicensed water well drillers by name Utah
- API
Licensed water well pump installers by company name 2014
opendata.utah.gov | Last Updated 2019-04-19T07:33:17.000ZLicensed water well pump installers by company name 2014