- Population
The population density of Golf Manor, OH was 6,295 in 2011.
Population Density
Population Density is computed by dividing the total population by Land Area Per Square Mile.
Above charts are based on data from the U.S. Census American Community Survey | ODN Dataset | API -
Geographic and Population Datasets Involving Golf Manor, OH
- API
Vital Signs: Greenfield Development – Bay Area
data.bayareametro.gov | Last Updated 2020-07-03T16:37:00.000ZVITAL SIGNS INDICATOR Greenfield Development (LU5) FULL MEASURE NAME The acres of construction on previously undeveloped land LAST UPDATED November 2019 DESCRIPTION Greenfield development refers to construction on previously undeveloped land and the corresponding expansion of our region’s developed footprint, which includes the extent of urban and built-up lands. The footprint is defined as land occupied by structures, with a building density of at least 1 unit to 1.5 acres. DATA SOURCE Department of Conservation: Farmland Mapping and Monitoring Program GIS Data Tables/Layers (1990-2016) https://www.conservation.ca.gov/dlrp/fmmp U.S. Census Bureau: Decennial Census Population by Census Block Group (2000-2010) http://factfinder.census.gov U.S. Census Bureau: American Community Survey (5-year) Population by Census Block Group (2000-2017) http://factfinder.census.gov METHODOLOGY NOTES (across all datasets for this indicator) For regional and local data, FMMP maps the extent of “urban and built-up” lands, which generally reflect the developed urban footprint of the region. The footprint is defined as land occupied by structures with building density of at least 1 unit to 1.5 acres. Uses include residential, industrial, commercial, construction, institutional, public administration, railroad and other transportation yards, cemeteries, airports, golf courses, sanitary landfills, sewage treatment, water control structures, and other developed purposes. To determine the amount of greenfield development (in acres) occurring in a given two-year period, the differences in urban footprint are computed on a county-level. FMMP makes slight refinements to urban boundaries over time, so changes in urban footprint +/- 100 acres are not regionally significant. The GIS shapefile represents the 2016 urban footprint and thus does not show previously urbanized land outside of the footprint (i.e. Hamilton Air Force Base). For metro comparisons, a different methodology had to be used to avoid the geospatial limitations associated with FMMP. U.S. Census population by census block group was gathered for each metro area for 2000, 2010, and 2017. Population data for years 2000 and 2010 come from the Decennial Census while data for 2018 comes from the 2017 5-year American Community Survey. The block group was considered urbanized if its average/gross density was greater than 1 housing unit per acre (a slightly higher threshold than FMMP uses for its definition). Because a block group cannot be flagged as partially urbanized, and non-residential uses are not fully captured, the urban footprint of the region calculated with this methodology is smaller than in FMMP. The metro data should be primarily used for looking at comparative growth rate in greenfield development rather than the acreage totals themselves.
- API
Vital Signs: Greenfield Development – by metro area
data.bayareametro.gov | Last Updated 2020-07-03T16:36:42.000ZVITAL SIGNS INDICATOR Greenfield Development (LU5) FULL MEASURE NAME The acres of construction on previously undeveloped land LAST UPDATED November 2019 DESCRIPTION Greenfield development refers to construction on previously undeveloped land and the corresponding expansion of our region’s developed footprint, which includes the extent of urban and built-up lands. The footprint is defined as land occupied by structures, with a building density of at least 1 unit to 1.5 acres. DATA SOURCE Department of Conservation: Farmland Mapping and Monitoring Program GIS Data Tables/Layers (1990-2016) https://www.conservation.ca.gov/dlrp/fmmp U.S. Census Bureau: Decennial Census Population by Census Block Group (2000-2010) http://factfinder.census.gov U.S. Census Bureau: American Community Survey (5-year) Population by Census Block Group (2000-2017) http://factfinder.census.gov METHODOLOGY NOTES (across all datasets for this indicator) For regional and local data, FMMP maps the extent of “urban and built-up” lands, which generally reflect the developed urban footprint of the region. The footprint is defined as land occupied by structures with building density of at least 1 unit to 1.5 acres. Uses include residential, industrial, commercial, construction, institutional, public administration, railroad and other transportation yards, cemeteries, airports, golf courses, sanitary landfills, sewage treatment, water control structures, and other developed purposes. To determine the amount of greenfield development (in acres) occurring in a given two-year period, the differences in urban footprint are computed on a county-level. FMMP makes slight refinements to urban boundaries over time, so changes in urban footprint +/- 100 acres are not regionally significant. The GIS shapefile represents the 2016 urban footprint and thus does not show previously urbanized land outside of the footprint (i.e. Hamilton Air Force Base). For metro comparisons, a different methodology had to be used to avoid the geospatial limitations associated with FMMP. U.S. Census population by census block group was gathered for each metro area for 2000, 2010, and 2017. Population data for years 2000 and 2010 come from the Decennial Census while data for 2018 comes from the 2017 5-year American Community Survey. The block group was considered urbanized if its average/gross density was greater than 1 housing unit per acre (a slightly higher threshold than FMMP uses for its definition). Because a block group cannot be flagged as partially urbanized, and non-residential uses are not fully captured, the urban footprint of the region calculated with this methodology is smaller than in FMMP. The metro data should be primarily used for looking at comparative growth rate in greenfield development rather than the acreage totals themselves.
- API
Vital Signs: Greenfield Development – by county
data.bayareametro.gov | Last Updated 2020-07-03T16:36:18.000ZVITAL SIGNS INDICATOR Greenfield Development (LU5) FULL MEASURE NAME The acres of construction on previously undeveloped land LAST UPDATED November 2019 DESCRIPTION Greenfield development refers to construction on previously undeveloped land and the corresponding expansion of our region’s developed footprint, which includes the extent of urban and built-up lands. The footprint is defined as land occupied by structures, with a building density of at least 1 unit to 1.5 acres. DATA SOURCE Department of Conservation: Farmland Mapping and Monitoring Program GIS Data Tables/Layers (1990-2016) https://www.conservation.ca.gov/dlrp/fmmp U.S. Census Bureau: Decennial Census Population by Census Block Group (2000-2010) http://factfinder.census.gov U.S. Census Bureau: American Community Survey (5-year) Population by Census Block Group (2000-2017) http://factfinder.census.gov METHODOLOGY NOTES (across all datasets for this indicator) For regional and local data, FMMP maps the extent of “urban and built-up” lands, which generally reflect the developed urban footprint of the region. The footprint is defined as land occupied by structures with building density of at least 1 unit to 1.5 acres. Uses include residential, industrial, commercial, construction, institutional, public administration, railroad and other transportation yards, cemeteries, airports, golf courses, sanitary landfills, sewage treatment, water control structures, and other developed purposes. To determine the amount of greenfield development (in acres) occurring in a given two-year period, the differences in urban footprint are computed on a county-level. FMMP makes slight refinements to urban boundaries over time, so changes in urban footprint +/- 100 acres are not regionally significant. The GIS shapefile represents the 2016 urban footprint and thus does not show previously urbanized land outside of the footprint (i.e. Hamilton Air Force Base). For metro comparisons, a different methodology had to be used to avoid the geospatial limitations associated with FMMP. U.S. Census population by census block group was gathered for each metro area for 2000, 2010, and 2017. Population data for years 2000 and 2010 come from the Decennial Census while data for 2018 comes from the 2017 5-year American Community Survey. The block group was considered urbanized if its average/gross density was greater than 1 housing unit per acre (a slightly higher threshold than FMMP uses for its definition). Because a block group cannot be flagged as partially urbanized, and non-residential uses are not fully captured, the urban footprint of the region calculated with this methodology is smaller than in FMMP. The metro data should be primarily used for looking at comparative growth rate in greenfield development rather than the acreage totals themselves.
- API
Vital Signs: Greenfield Development – Bay Area shapefile
data.bayareametro.gov | Last Updated 2020-07-03T16:35:24.000ZVITAL SIGNS INDICATOR Greenfield Development (LU5) FULL MEASURE NAME The acres of construction on previously undeveloped land LAST UPDATED November 2019 DESCRIPTION Greenfield development refers to construction on previously undeveloped land and the corresponding expansion of our region’s developed footprint, which includes the extent of urban and built-up lands. The footprint is defined as land occupied by structures, with a building density of at least 1 unit to 1.5 acres. DATA SOURCE Department of Conservation: Farmland Mapping and Monitoring Program GIS Data Tables/Layers (1990-2016) https://www.conservation.ca.gov/dlrp/fmmp U.S. Census Bureau: Decennial Census Population by Census Block Group (2000-2010) http://factfinder.census.gov U.S. Census Bureau: American Community Survey (5-year) Population by Census Block Group (2000-2017) http://factfinder.census.gov METHODOLOGY NOTES (across all datasets for this indicator) For regional and local data, FMMP maps the extent of “urban and built-up” lands, which generally reflect the developed urban footprint of the region. The footprint is defined as land occupied by structures with building density of at least 1 unit to 1.5 acres. Uses include residential, industrial, commercial, construction, institutional, public administration, railroad and other transportation yards, cemeteries, airports, golf courses, sanitary landfills, sewage treatment, water control structures, and other developed purposes. To determine the amount of greenfield development (in acres) occurring in a given two-year period, the differences in urban footprint are computed on a county-level. FMMP makes slight refinements to urban boundaries over time, so changes in urban footprint +/- 100 acres are not regionally significant. The GIS shapefile represents the 2016 urban footprint and thus does not show previously urbanized land outside of the footprint (i.e. Hamilton Air Force Base). For metro comparisons, a different methodology had to be used to avoid the geospatial limitations associated with FMMP. U.S. Census population by census block group was gathered for each metro area for 2000, 2010, and 2017. Population data for years 2000 and 2010 come from the Decennial Census while data for 2018 comes from the 2017 5-year American Community Survey. The block group was considered urbanized if its average/gross density was greater than 1 housing unit per acre (a slightly higher threshold than FMMP uses for its definition). Because a block group cannot be flagged as partially urbanized, and non-residential uses are not fully captured, the urban footprint of the region calculated with this methodology is smaller than in FMMP. The metro data should be primarily used for looking at comparative growth rate in greenfield development rather than the acreage totals themselves.
- API
Community Perceptions Survey 2021
data.cincinnati-oh.gov | Last Updated 2024-04-16T17:28:36.000ZThe Cincinnati Community Perceptions Survey was developed by the City's Office of Performance and Data Analytics and ETC Institute in the fall of 2021. This community engagement tool was designed to allow the City Administration to evaluate resident satisfaction with our services and measure that level of satisfaction against cities of similar size, location, and demographics. The survey design also allows the City to capture community priorities for investment in services over the next two years. The survey was administered during the winter of 2021 by mail to a random sample of households across the city, and was available to complete by mail or online. The goal of 1,200 completed surveys was exceeded, with a total of 1,408 residents completing the survey. The overall residents for the sample of 1,408 households have a precision of at least +/-2.6% at the 95% level of confidence, and are demographically representative of our city's population. This year's survey will set a baseline for Cincinnati to work from with the goal of better understanding where we are excelling in service delivery and where our local government could benefit from intentional improvement and resources. Find the link to the Survey landing page here: https://etcinstitute.com/directionfinder2-0/city-of-cincinnati-ohio/
- API
Community Perceptions Survey 2023
data.cincinnati-oh.gov | Last Updated 2024-04-16T17:55:03.000ZThe Cincinnati Community Perceptions Survey was developed by the City's Office of Performance and Data Analytics and ETC Institute in the fall of 2021. This community engagement tool was designed to allow the City Administration to evaluate resident satisfaction with our services and measure that level of satisfaction against cities of similar size, location, and demographics. The survey design also allows the City to capture community priorities for investment in services over the next two years. The survey was administered during the winter of 2023 by mail to a random sample of households across the city, and was available to complete by mail or online. The goal of 1,200 completed surveys was met, with a total of 1,235 residents completing the survey. The overall residents for the sample of 1,408 households have a precision of at least +/-2.8% at the 95% level of confidence, and are demographically representative of our city's population. This survey provides insight into where we are excelling in service delivery and where our local government could benefit from intentional improvement and resources. Read the full report on survey results here: https://www.cincinnati-oh.gov/manager/community-survey/ Find the Community Perceptions Survey Dashboard here: https://insights.cincinnati-oh.gov/stories/s/Community-Perceptions-Survey-Version-2/3nn5-m4kg/ Find the 2021 Community Perceptions Survey Data here: https://data.cincinnati-oh.gov/efficient-service-delivery/Community-Perceptions-Survey-2021/pkyn-d5t4/about_data