The water area of Shaker Heights, OH was 0 in 2018.
Land Area
Water Area
Land area is a measurement providing the size, in square miles, of the land portions of geographic entities for which the Census Bureau tabulates and disseminates data. Area is calculated from the specific boundary recorded for each entity in the Census Bureau's geographic database. Land area is based on current information in the TIGER® data base, calculated for use with Census 2010.
Water Area figures include inland, coastal, Great Lakes, and territorial sea water. Inland water consists of any lake, reservoir, pond, or similar body of water that is recorded in the Census Bureau's geographic database. It also includes any river, creek, canal, stream, or similar feature that is recorded in that database as a two- dimensional feature (rather than as a single line). The portions of the oceans and related large embayments (such as Chesapeake Bay and Puget Sound), the Gulf of Mexico, and the Caribbean Sea that belong to the United States and its territories are classified as coastal and territorial waters; the Great Lakes are treated as a separate water entity. Rivers and bays that empty into these bodies of water are treated as inland water from the point beyond which they are narrower than 1 nautical mile across. Identification of land and inland, coastal, territorial, and Great Lakes waters is for data presentation purposes only and does not necessarily reflect their legal definitions.
Above charts are based on data from the U.S. Census American Community Survey | ODN Dataset | API -
Geographic and Area Datasets Involving Shaker Heights, OH
- API
DWR Dam Safety Jurisdictional Dam
data.colorado.gov | Last Updated 2024-10-25T06:04:10.000ZA Jurisdictional Dam is a dam creating a reservoir with a capacity of more than 100 acre-feet, or creates a reservoir with a surface area in excess of 20 acres at the high-water line, or exceeds 10 feet in height measured vertically from the elevation of the lowest point of the natural surface of the ground where that point occurs along the longitudinal centerline of the dam up to the crest of the emergency spillway of the dam. For reservoirs created by excavation, or where the invert of the outlet conduit is placed below the surface of the natural ground at its lowest point beneath the dam, the jurisdictional height shall be measured from the invert of the outlet at the longitudinal centerline of the embankment or from the bottom of the excavation at the longitudinal centerline of the dam, whichever is greatest. Jurisdictional height is defined in Rule 4.2.19. The State Engineer shall have final authority over determination of the jurisdictional height of the dam.
- API
DWR Livestock Water Tank and Erosion Control Dams
data.colorado.gov | Last Updated 2024-10-20T06:25:26.000ZLivestock water tanks are covered under the "Livestock Water Tank Act of Colorado" sections 35-49-101 to 35-49-116, C.R.S. These structures include all reservoirs built after April 17, 1941, on watercourses which the state engineer has determined to be "normally dry" and having a capacity of not more than ten acre-feet and a vertical height not exceeding fifteen feet from the bottom of the channel to the bottom of the spillway. Again, as with erosion control dams, the height is measured from the lowest point of the upstream toe to the crest of the spillway. No livestock water tanks can be used for irrigation purposes. Erosion control dams are governed under Colorado statute (see section 37-87-122, C.R.S. (1990). These types of structures may be constructed on water courses which have been determined by the state engineer to be normally dry (which for our purposes is dry more than 80% of the time). Structures of this type cannot exceed fifteen feet from the bottom of the channel to the bottom of the spillway and cannot exceed ten acre-feet at the emergency spillway level. The height of the dam is measured vertically from the lowest point of the upstream toe to the crest of the dam in contrast to those measured vertically from the centerline pursuant to section 37-87-105, C.R.S. (1990). Note: The structure can be larger than specified under section 37-87-122, however, it then will be evaluated and must be constructed pursuant to section 37-87-105.
- API
DWR Dam Safety Non-Jurisdictional Dam
data.colorado.gov | Last Updated 2024-10-25T06:02:21.000ZA Non-Jurisdictional Dam is a dam creating a reservoir with a capacity of 100 acre-feet or less and a surface area of 20 acres or less and with a height measured as defined in Rules 4.2.5.1 and 4.2.19 of 10 feet or less. Non-jurisdictional size dams are regulated and subject to the authority of the State Engineer consistent with sections 37- 87-102 and 37-87-105 C.R.S.
- API
ENERGY STAR Certified Water Heaters
data.energystar.gov | Last Updated 2024-10-24T13:31:50.000ZCertified models meet all ENERGY STAR requirements as listed in the Version 5.0 ENERGY STAR Program Requirements for Water Heaters that are effective April 18, 2023. A detailed listing of key efficiency criteria are available at https://www.energystar.gov/products/water_heaters/residential_water_heaters_key_product_criteria
- API
Permitted Dams in the State of Iowa
mydata.iowa.gov | Last Updated 2023-08-30T20:58:56.000ZPermitted dams in Iowa and associated attributes, as recorded by the Floodplain Section of the DNR. The dams regulated are those with the parameters listed below: a. Any dam designed to provide a sum of permanent and temporary storage exceeding 50 acre-feet at the top of dam elevation, or 25 acre-feet if the dam does not have an emergency spillway, and which has a height of 5 feet or more. b. Any dam designed to provide permanent storage in excess of 18 acre-feet and which has a height of 5 feet or more. c. Any dam located in or within 1 mile of an incorporated municipality, if the dam has a height of 10 feet or more, stores 10 acre-feet or more at the top of dam elevation, and is situated such that the discharge from the dam will flow through the incorporated area. d. Also regardless of dam height and storage, any urban area dam situated across a stream that has a drainage are of more than two square miles and any dam in a rural area situated across a stream that has a drainage area of more than 10 square mile. The generally known threshold is any dam that has a height of five feet or more and a permanent water storage volume of more than 18 acre-feet. The height is measure from the top of the dam to the lowest point on the downstream side of the dam, usually the streambed.
- API
Community Perceptions Survey 2021
data.cincinnati-oh.gov | Last Updated 2024-04-16T17:28:36.000ZThe Cincinnati Community Perceptions Survey was developed by the City's Office of Performance and Data Analytics and ETC Institute in the fall of 2021. This community engagement tool was designed to allow the City Administration to evaluate resident satisfaction with our services and measure that level of satisfaction against cities of similar size, location, and demographics. The survey design also allows the City to capture community priorities for investment in services over the next two years. The survey was administered during the winter of 2021 by mail to a random sample of households across the city, and was available to complete by mail or online. The goal of 1,200 completed surveys was exceeded, with a total of 1,408 residents completing the survey. The overall residents for the sample of 1,408 households have a precision of at least +/-2.6% at the 95% level of confidence, and are demographically representative of our city's population. This year's survey will set a baseline for Cincinnati to work from with the goal of better understanding where we are excelling in service delivery and where our local government could benefit from intentional improvement and resources. Find the link to the Survey landing page here: https://etcinstitute.com/directionfinder2-0/city-of-cincinnati-ohio/
- API
Condition of Non-Tidal Wetlands
data.delaware.gov | Last Updated 2022-10-06T19:20:47.000ZIncludes all data collected to date about non-tidal wetland condition in Delaware. Data is collected in the field using the Delaware Rapid Assessment Procedure (DERAP).
- API
Building Permits: Addition/Alteration
data.cambridgema.gov | Last Updated 2024-10-14T11:31:07.000ZList of permits related to the construction or the alteration of existing buildings in Cambridge. These permits cover construction that changes the structure, the footprint, or the volume of the building. This includes decks, porches, and additions, as well any reconstruction, renovation or repair to an existing structure. This dataset derives from Cambridge's ViewPoint permitting system.
- API
Storm Outfalls
data.ramseycounty.us | Last Updated 2024-10-16T10:09:35.000ZStorm outfall locations.
- API
NYC Building Energy and Water Data Disclosure for Local Law 84 (2022-Present)
data.cityofnewyork.us | Last Updated 2024-10-01T19:56:35.000ZLocal Law 84 of 2009 (LL84) requires annual energy and water benchmarking data to be submitted by owners of buildings with more than 50,000 square feet. This data is collected via the Environmental Protection Agency's (EPA) <a href="https://www.energystar.gov/buildings/tools-and-resources/portfolio-manager-0">Portfolio Manager website</a> Each property is identified by it's EPA assigned property ID, and can contain one or more tax lots identified by one or more BBLs (Borough, Block, Lot) or one or more buildings identified by one or more building identification numbers (BIN) Please visit <a href="https://www1.nyc.gov/site/buildings/codes/benchmarking.page">DOB's Benchmarking and Energy Efficiency Rating page</a> for additional information.