The water area of Glenn Heights, TX was 0 in 2018.
Land Area
Water Area
Land area is a measurement providing the size, in square miles, of the land portions of geographic entities for which the Census Bureau tabulates and disseminates data. Area is calculated from the specific boundary recorded for each entity in the Census Bureau's geographic database. Land area is based on current information in the TIGER® data base, calculated for use with Census 2010.
Water Area figures include inland, coastal, Great Lakes, and territorial sea water. Inland water consists of any lake, reservoir, pond, or similar body of water that is recorded in the Census Bureau's geographic database. It also includes any river, creek, canal, stream, or similar feature that is recorded in that database as a two- dimensional feature (rather than as a single line). The portions of the oceans and related large embayments (such as Chesapeake Bay and Puget Sound), the Gulf of Mexico, and the Caribbean Sea that belong to the United States and its territories are classified as coastal and territorial waters; the Great Lakes are treated as a separate water entity. Rivers and bays that empty into these bodies of water are treated as inland water from the point beyond which they are narrower than 1 nautical mile across. Identification of land and inland, coastal, territorial, and Great Lakes waters is for data presentation purposes only and does not necessarily reflect their legal definitions.
Above charts are based on data from the U.S. Census American Community Survey | ODN Dataset | API -
Geographic and Area Datasets Involving Glenn Heights, TX
- API
Water Quality Sampling Data
datahub.austintexas.gov | Last Updated 2024-10-07T08:32:54.000ZData collected to assess water quality conditions in the natural creeks, aquifers and lakes in the Austin area. This is raw data, provided directly from our Water Resources Monitoring database (WRM) and should be considered provisional. Data may or may not have been reviewed by project staff. A map of site locations can be found by searching for LOCATION.WRM_SAMPLE_SITES; you may then use those WRM_SITE_IDs to filter in this dataset using the field SAMPLE_SITE_NO.
- API
DWR Dam Safety Jurisdictional Dam
data.colorado.gov | Last Updated 2024-10-07T06:04:25.000ZA Jurisdictional Dam is a dam creating a reservoir with a capacity of more than 100 acre-feet, or creates a reservoir with a surface area in excess of 20 acres at the high-water line, or exceeds 10 feet in height measured vertically from the elevation of the lowest point of the natural surface of the ground where that point occurs along the longitudinal centerline of the dam up to the crest of the emergency spillway of the dam. For reservoirs created by excavation, or where the invert of the outlet conduit is placed below the surface of the natural ground at its lowest point beneath the dam, the jurisdictional height shall be measured from the invert of the outlet at the longitudinal centerline of the embankment or from the bottom of the excavation at the longitudinal centerline of the dam, whichever is greatest. Jurisdictional height is defined in Rule 4.2.19. The State Engineer shall have final authority over determination of the jurisdictional height of the dam.
- API
DWR Livestock Water Tank and Erosion Control Dams
data.colorado.gov | Last Updated 2024-10-06T06:29:37.000ZLivestock water tanks are covered under the "Livestock Water Tank Act of Colorado" sections 35-49-101 to 35-49-116, C.R.S. These structures include all reservoirs built after April 17, 1941, on watercourses which the state engineer has determined to be "normally dry" and having a capacity of not more than ten acre-feet and a vertical height not exceeding fifteen feet from the bottom of the channel to the bottom of the spillway. Again, as with erosion control dams, the height is measured from the lowest point of the upstream toe to the crest of the spillway. No livestock water tanks can be used for irrigation purposes. Erosion control dams are governed under Colorado statute (see section 37-87-122, C.R.S. (1990). These types of structures may be constructed on water courses which have been determined by the state engineer to be normally dry (which for our purposes is dry more than 80% of the time). Structures of this type cannot exceed fifteen feet from the bottom of the channel to the bottom of the spillway and cannot exceed ten acre-feet at the emergency spillway level. The height of the dam is measured vertically from the lowest point of the upstream toe to the crest of the dam in contrast to those measured vertically from the centerline pursuant to section 37-87-105, C.R.S. (1990). Note: The structure can be larger than specified under section 37-87-122, however, it then will be evaluated and must be constructed pursuant to section 37-87-105.
- API
DWR Dam Safety Non-Jurisdictional Dam
data.colorado.gov | Last Updated 2024-10-07T06:02:21.000ZA Non-Jurisdictional Dam is a dam creating a reservoir with a capacity of 100 acre-feet or less and a surface area of 20 acres or less and with a height measured as defined in Rules 4.2.5.1 and 4.2.19 of 10 feet or less. Non-jurisdictional size dams are regulated and subject to the authority of the State Engineer consistent with sections 37- 87-102 and 37-87-105 C.R.S.
- API
Water Quality Sampling Locations (deprecated)
datahub.austintexas.gov | Last Updated 2023-08-28T18:20:21.000ZDEPRECATED: Using LOCATION.WRM_SAMPLE_SITES. https://data.austintexas.gov/Locations-and-Maps/LOCATION-WRM_sample_sites/mwu5-jd6h Locations for water quality sampling performed in the Austin, TX area by the Watershed Protection Environmental Resource Management division.
- API
AWU_ServiceArea_ImpactFee_Boundary
datahub.austintexas.gov | Last Updated 2023-04-10T13:39:08.000ZThis polygon delineates the boundary wherein the Austin Water Utility (the City of Austin) intends to serve water, wastewater, and reclaimed water, and wherein it will charge a fee (impact fee) for connecting to their systems.
- API
ENERGY STAR Certified Water Heaters
data.energystar.gov | Last Updated 2024-10-07T13:30:47.000ZCertified models meet all ENERGY STAR requirements as listed in the Version 5.0 ENERGY STAR Program Requirements for Water Heaters that are effective April 18, 2023. A detailed listing of key efficiency criteria are available at https://www.energystar.gov/products/water_heaters/residential_water_heaters_key_product_criteria
- API
Austin's Small Scale Green Infrastructure
datahub.austintexas.gov | Last Updated 2023-04-10T13:41:07.000ZA rain garden is a low area that absorbs and filters rain water runoff that comes from roofs, sidewalks, and driveways. Rain runs off the hard surfaces, collects in the shallow depression, and slowly soaks into the soil. They are usually planted with colorful native plants and grasses. Every little bit helps to conserve water. Currently we are tracking rain garden bioswale, cistern, and green roofs.
- API
Traffic Cameras
datahub.austintexas.gov | Last Updated 2024-10-06T06:55:45.000ZThis dataset contains information about traffic cameras in Austin, TX. These cameras are used to monitor real-time LIVE traffic conditions only. Video is NOT recorded or retained of daily traffic. Traffic cameras are owned and operated by the City of Austin Transportation & Public Works Department. You may also be interested in our traffic signal operations dashboards, available at https://data.mobility.austin.gov For information about Austin's Mobility Management Center, visit: http://www.austintexas.gov/department/arterial-management This product is for informational purposes and may not have been prepared for or be suitable for legal, engineering, or surveying purposes. It does not represent an on-the-ground survey and represents only the approximate relative location of traffic signals.
- API
Permitted Dams in the State of Iowa
mydata.iowa.gov | Last Updated 2023-08-30T20:58:56.000ZPermitted dams in Iowa and associated attributes, as recorded by the Floodplain Section of the DNR. The dams regulated are those with the parameters listed below: a. Any dam designed to provide a sum of permanent and temporary storage exceeding 50 acre-feet at the top of dam elevation, or 25 acre-feet if the dam does not have an emergency spillway, and which has a height of 5 feet or more. b. Any dam designed to provide permanent storage in excess of 18 acre-feet and which has a height of 5 feet or more. c. Any dam located in or within 1 mile of an incorporated municipality, if the dam has a height of 10 feet or more, stores 10 acre-feet or more at the top of dam elevation, and is situated such that the discharge from the dam will flow through the incorporated area. d. Also regardless of dam height and storage, any urban area dam situated across a stream that has a drainage are of more than two square miles and any dam in a rural area situated across a stream that has a drainage area of more than 10 square mile. The generally known threshold is any dam that has a height of five feet or more and a permanent water storage volume of more than 18 acre-feet. The height is measure from the top of the dam to the lowest point on the downstream side of the dam, usually the streambed.