Empowered by Tyler Technologies
Refine Results

The population density of Dulles Town Center, VA was 2,063 in 2018.

Population Density

Population Density is computed by dividing the total population by Land Area Per Square Mile.

Above charts are based on data from the U.S. Census American Community Survey | ODN Dataset | API - Notes:

1. ODN datasets and APIs are subject to change and may differ in format from the original source data in order to provide a user-friendly experience on this site.

2. To build your own apps using this data, see the ODN Dataset and API links.

3. If you use this derived data in an app, we ask that you provide a link somewhere in your applications to the Open Data Network with a citation that states: "Data for this application was provided by the Open Data Network" where "Open Data Network" links to http://opendatanetwork.com. Where an application has a region specific module, we ask that you add an additional line that states: "Data about REGIONX was provided by the Open Data Network." where REGIONX is an HREF with a name for a geographical region like "Seattle, WA" and the link points to this page URL, e.g. http://opendatanetwork.com/region/1600000US5363000/Seattle_WA

Geographic and Population Datasets Involving Dulles Town Center, VA

  • API

    Deer Tick Surveillance: Nymphs (May to Sept) excluding Powassan virus: Beginning 2008

    health.data.ny.gov | Last Updated 2024-05-01T18:07:53.000Z

    This dataset provides the results from collecting and testing nymph deer ticks, also known as blacklegged ticks, or by their scientific name <i>Ixodes scapularis</i>. Collection and testing take place across New York State (excluding New York City) from May to September, when nymph deer ticks are most commonly seen. Nymph deer ticks are individually tested for different bacteria and parasites, which includes the bacteria responsible for Lyme disease. These data should simply be used to educate people that there is a risk of coming in contact with ticks and tick-borne diseases. These data only provide nymph tick infections at a precise location and at one point in time. Both measures, tick population density and percentage, of ticks infected with the specified bacteria or parasite can vary greatly within a very small area and within a county. These data should not be used to broadly predict disease risk for a county. Further below on this page you can find links to tick prevention tips, a video on how to safely remove a tick, and more datasets with tick testing results. Interactive charts and maps provide an easier way to view the data.

  • API

    Deer Tick Surveillance: Adults (Oct to Dec) excluding Powassan virus: Beginning 2008

    health.data.ny.gov | Last Updated 2024-05-01T18:05:44.000Z

    This dataset provides the results from collecting and testing adult deer ticks, also known as blacklegged ticks, or by their scientific name <i>Ixodes scapularis</i>. Collection and testing take place across New York State (excluding New York City) from October to December, when adult deer ticks are most commonly seen. Adult deer ticks are individually tested for different bacteria and parasites, which includes the bacteria responsible for Lyme disease. These data should simply be used to educate people that there is a risk of coming in contact with ticks and tick-borne diseases. These data only provide adult tick infections at a precise location and at one point in time. Both measures, tick population density and percentage, of ticks infected with the specified bacteria or parasite can vary greatly within a very small area and within a county. These data should not be used to broadly predict disease risk for a county. Further below on this page you can find links to tick prevention tips, a video on how to safely remove a tick, and more datasets with tick testing results. Interactive charts and maps provide an easier way to view the data.

  • API

    Deer Tick Surveillance: Adults (Oct to Dec) Powassan Virus Only: Beginning 2009

    health.data.ny.gov | Last Updated 2024-05-01T18:04:12.000Z

    This dataset provides the results from collecting and testing adult deer ticks, also known as blacklegged ticks, or by their scientific name Ixodes scapularis. Collection and testing take place across New York State (excluding New York City) from October to December, when adult deer ticks are most commonly seen. Adult deer ticks are tested in “pools”, or groups of up to ten adult ticks per pool, for the Powassan virus, also known as Deer tick virus. These data should simply be used to educate people that there is a risk of coming in contact with ticks and tick-borne diseases. These data only provide adult tick minimum infection rates at a precise location and at a point in time. Both measures, tick population density and minimum infection percentages, can vary greatly within a very small area and within a county. These data should not be used to broadly predict disease risk for a county. Further below on this page you can find links to tick prevention tips, a video on how to safely remove a tick, and more datasets with tick testing results. Interactive charts and maps provide an easier way to view the data.

  • API

    Deer Tick Surveillance: Nymphs (May to Sept) Powassan Virus Only: Beginning 2009

    health.data.ny.gov | Last Updated 2024-05-01T18:00:16.000Z

    This dataset provides the results from collecting and testing nymph deer ticks, also known as blacklegged ticks, or by their scientific name <i>Ixodes scapularis</i>. Collection and testing take place across New York State (excluding New York City) from May to September, when nymph deer ticks are most commonly seen. Nymph deer ticks are tested in “pools”, or groups of up to ten adult ticks per pool, for the Powassan virus, also known as Deer tick virus. These data should simply be used to educate people that there is a risk of coming in contact with ticks and tick-borne diseases. These data only provide nymph tick minimum infection rates at a precise location and at one point in time. Both measures, tick population density and minimum infection percentages, can vary greatly within a very small area and within a county. These data should not be used to broadly predict disease risk for a county. Further below on this page you can find links to tick prevention tips, a video on how to safely remove a tick, and more datasets with tick testing results. Interactive charts and maps provide an easier way to view the data.

  • API

    Waste Tire Abatement Sites

    data.ny.gov | Last Updated 2024-09-27T18:10:25.000Z

    Information on designated waste tire abatement sites in New York State, including approximate size, location, and abatement status.

  • API

    Point In Time Homeless Survey Data

    data.sonomacounty.ca.gov | Last Updated 2019-07-12T18:26:35.000Z

    The County of Sonoma conducts an annual homeless count for the entire county. The survey data is derived from a sample of about 600 homeless persons countywide per year. The resulting information is statistically reliable only for the county as a whole, not for individual locations. The exception is the City of Santa Rosa, where the sample taken within the city is large enough to be predictive of the overall homeless population in that city.

  • API

    NYC Building Energy and Water Data Disclosure for Local Law 84 (2022-Present)

    data.cityofnewyork.us | Last Updated 2024-10-01T19:56:35.000Z

    Local Law 84 of 2009 (LL84) requires annual energy and water benchmarking data to be submitted by owners of buildings with more than 50,000 square feet. This data is collected via the Environmental Protection Agency's (EPA) <a href="https://www.energystar.gov/buildings/tools-and-resources/portfolio-manager-0">Portfolio Manager website</a> Each property is identified by it's EPA assigned property ID, and can contain one or more tax lots identified by one or more BBLs (Borough, Block, Lot) or one or more buildings identified by one or more building identification numbers (BIN) Please visit <a href="https://www1.nyc.gov/site/buildings/codes/benchmarking.page">DOB's Benchmarking and Energy Efficiency Rating page</a> for additional information.

  • API

    COVID-19 Reported Patient Impact and Hospital Capacity by Facility

    data.ct.gov | Last Updated 2024-10-05T10:34:21.000Z

    The "COVID-19 Reported Patient Impact and Hospital Capacity by Facility" dataset from the U.S. Department of Health & Human Services, filtered for Connecticut. View the full dataset and detailed metadata here: https://healthdata.gov/Hospital/COVID-19-Reported-Patient-Impact-and-Hospital-Capa/anag-cw7u The following dataset provides facility-level data for hospital utilization aggregated on a weekly basis (Friday to Thursday). These are derived from reports with facility-level granularity across two main sources: (1) HHS TeleTracking, and (2) reporting provided directly to HHS Protect by state/territorial health departments on behalf of their healthcare facilities. The hospital population includes all hospitals registered with Centers for Medicare & Medicaid Services (CMS) as of June 1, 2020. It includes non-CMS hospitals that have reported since July 15, 2020. It does not include psychiatric, rehabilitation, Indian Health Service (IHS) facilities, U.S. Department of Veterans Affairs (VA) facilities, Defense Health Agency (DHA) facilities, and religious non-medical facilities. For a given entry, the term “collection_week” signifies the start of the period that is aggregated. For example, a “collection_week” of 2020-11-20 means the average/sum/coverage of the elements captured from that given facility starting and including Friday, November 20, 2020, and ending and including reports for Thursday, November 26, 2020. Reported elements include an append of either “_coverage”, “_sum”, or “_avg”. A “_coverage” append denotes how many times the facility reported that element during that collection week. A “_sum” append denotes the sum of the reports provided for that facility for that element during that collection week. A “_avg” append is the average of the reports provided for that facility for that element during that collection week. The file will be updated weekly. No statistical analysis is applied to impute non-response. For averages, calculations are based on the number of values collected for a given hospital in that collection week. Suppression is applied to the file for sums and averages less than four (4). In these cases, the field will be replaced with “-999,999”. This data is preliminary and subject to change as more data become available. Data is available starting on July 31, 2020. Sometimes, reports for a given facility will be provided to both HHS TeleTracking and HHS Protect. When this occurs, to ensure that there are not duplicate reports, deduplication is applied according to prioritization rules within HHS Protect. For influenza fields listed in the file, the current HHS guidance marks these fields as optional. As a result, coverage of these elements are varied. On May 3, 2021, the following fields have been added to this data set. hhs_ids previous_day_admission_adult_covid_confirmed_7_day_coverage previous_day_admission_pediatric_covid_confirmed_7_day_coverage previous_day_admission_adult_covid_suspected_7_day_coverage previous_day_admission_pediatric_covid_suspected_7_day_coverage previous_week_personnel_covid_vaccinated_doses_administered_7_day_sum total_personnel_covid_vaccinated_doses_none_7_day_sum total_personnel_covid_vaccinated_doses_one_7_day_sum total_personnel_covid_vaccinated_doses_all_7_day_sum previous_week_patients_covid_vaccinated_doses_one_7_day_sum previous_week_patients_covid_vaccinated_doses_all_7_day_sum On May 8, 2021, this data set has been converted to a corrected data set. The corrections applied to this data set are to smooth out data anomalies caused by keyed in data errors. To help determine which records have had corrections made to it. An additional Boolean field called is_corrected has been added. To see the numbers as reported by the facilities, go to: https://healthdata.gov/Hospital/COVID-19-Reported-Patient-Impact-and-Hospital-Capa/uqq2-txqb On May 13, 2021 Changed vaccination fields from sum to max or min fields. This reflects the maximum or minimum number report